2005 Kia Optima Steering and Chassis Parts

Below you will find various in-demand Kia Steering and Chassis Parts, components and accessories for your 2005 Optima. Advance Auto Parts has popular Optima parts like Tie Rods, Power Steering Parts, Ball Joints and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Optima model years including 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 and more. Select a category of 2005 Kia Optima Steering and Chassis Parts below and start saving instantly.

Popular 2005 Kia Optima Steering and Chassis Parts Categories

Power Steering Coolers

Suspension Ball Joint Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Power Steering Pressure Hoses

Power Steering Pressure Switches

Steering Knuckles

Power Steering Reservoirs

Power Steering Return Hoses

Rack and Pinion Boots

Sway Bar Bushings

Rack and Pinion Rebuild Kits

Worm Shaft Seals

Essential Steering and Chassis Parts for 2005 Kia Optimas

from

$31.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$88.99

Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$56.99

P/S FLUID RESERVOIR

from

$14.49

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$40.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$346.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

HARDENDED TO MAXIMIZE STRENGTH – Studs are induction hardened to maximize strength, resist breakage and improve fatigue life
HARDENDED TO MAXIMIZE STRENGTHá-áStuds are induction hardened to maximize strength, resist breakage and improve fatigue life
KEEPS DIRT AND WATER OUT – Pre- installed dust boot seal provides an effective barrier against water- causing contaminants
KEEPS DIRT AND WATER OUT – Pre- installed dust bootáseal provides an effective barrier againstáwater- causing contaminants
PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$7.99

Power Steering Filter

from

$6.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$107.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise

from

$131.99

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise

from

$98.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$45.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$37.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Pre-applied threadlocker keeps fasteners from loosening due to vibration

from

$61.99

Product Features:

DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates

from

$40.49

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$355.99

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$593.99

NEW RACK & PINION

from

$24.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Power Steering Pressure Switch monitors the hydraulic pressure in the power steering system, enhancing safety and performance by alerting the driver to potential issues such as low fluid levels or system malfunctions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$42.49

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Loose or worn chassis parts can lead to premature tire wear
Exclusive cover plate protects against contaminants leaking into the bearing surface
Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$129.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$718.99

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$331.99

When an original equipment wheel hub assembly is due for replacement on certain Kia Optima vehicles, the job can become difficult because rust has grown between the surfaces of the steering knuckle and the wheel hub bearing, ultimately resulting in the two assemblies seizing together. Although this problem is common in Salt Belt regions, it can also occur over time under normal vehicle use and when it does it can make the knuckle challenging or impossible to salvage. This Dorman OE FIX steering knuckle features a patented and proprietary coating that helps prevent corrosion between surfaces, providing a more permanent and reliable repair than the factory knuckle design.

Product Features:

Improved design – this steering knuckle has a proprietary coating that helps prevent rust forming between surfaces, providing a more permanent and reliable repair than the OE knuckle design
Direct replacement – engineered to match the performance of the original equipment steering knuckle
Location-specific – designed for the front right side of specified Kia Optima vehicles
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$599.99

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$116.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$129.99

Zinc coated tubes protect against rust and corrosion
Heat/abrasion tubing protects vital areas

from

$49.99

Zinc coated tubes protect against rust and corrosion

Upgrade your 2005 Kia Optima with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2005 Kia Optima, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Kia or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Optima functioning at its best. At Advance Auto Parts, we offer a wide selection of 62 Steering and Chassis Parts for the 2005 Kia Optima, designed to meet your needs without breaking the bank. From Tie Rod replacements to Power Steering Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2005 Kia Optima at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $5.49 to $579.99, with an average price of $103.82. Our 62 Steering and Chassis Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 2005 Kia Optima without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Kia Optima, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, Dorman, Imperial, and more. Moog Steering and Chassis Parts start at just $40.49 and boast an impressive 4.5 stars average rating from customers. Dorman and Imperial also bring quality to the table, with Steering and Chassis Parts available starting at $11.99, and at an average 4.2 stars rating. With 1,304 customer reviews and counting, our 2005 Kia Optima Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Kia Optima is always ready to roll. We’re committed to providing you with everything you need to keep your Optima in top shape, all in one place. Start shopping confidently below for your 2005 Kia Optima!

Best-Selling Tie Rods for 2005 Kia Optimas

Enhance the driving experience in your Kia with 4 quality Tie Rod components, starting at $19.99.

show more show less

from

$129.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$59.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$59.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$19.99

Tie Rod Ends are critical suspension components linking the power steering rack to the wheel housing, designed to create stability in proper control and steering. Normal mileage over time and/or even damage (resulting from external impact) may cause the tie rod end bushings to experience excessive play. Excessive tie rod end play may eventually lead to alignment issues causing steering & abnormal tire damage – cupping or rapid tread wear may cause unwanted vibration issues that may affect proper steering ability or create other issues. HL Mando tie rod ends are not just aftermarket replacements, they are original equipment for Hyundai and KIA vehicles – We Are OE!

Product Features:

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Manufactured in Korea

Most Popular 2005 Kia Optima Power Steering Parts

Customize your Kia with 35 Power Steering Parts products like Power Steering Pumps, Power Steering Pressure Hoses, and Power Steering Return Hoses, all priced under $396.99.

show more show less

from

$50.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$136.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$159.99

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$182.99

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$8.99

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$34.99

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$98.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$135.99

When a Power Steering (PS) Pump goes bad or fails, a driver most evidently will experience an abnormal whining/grinding noise occurring while turning the wheel and will eventually feel loss of steering response & assist. The PS pump is an essential component, as its responsibility is to send hydraulic fluid to the power steering rack and pinion. HL Mando OE power steering pumps are just like the one from the factory. Our pumps come complete with pulley and ready to install. Don’t risk using just any aftermarket PS pump, get the job done right with the original – We Are OE!

Product Features:

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Manufactured in Korea

from

$106.99

Zinc coated tubes protect against rust and corrosion

from

$24.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$71.99

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100 percent tested to ensure proper fit and function.

Product Features:

100 percent testing ensures leak-free performance.
Designed to match O.E. fit, function and performance.
Manufactured from O.E. grade material for strength and durability.
Resistant to cracking caused by the high temperatures in the engine compartment.
Reservoirs with integrated filter have the same filtration efficiency as O.E.

from

$66.99

from

$396.99

NEW RACK & PINION

from

$355.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$345.99

AAE Remanufactured Hydraulic Power Steering Rack & Pinions include inner tie rods and new bellows secured by OE stainless steel clamps. AAE remanufactures all units in the USA. AAE uses only the highest quality OE components in our remanufacturing process and each unit undergoes a thorough inspection & testing procedure. Every unit is 100% tested to the strictest standards in the industry to ensure the customer is purchasing a quality product. Each unit is electrostatically painted with automotive grade paint to ensure long lasting finish to protect the unit in any driving condition. To ensure long life and OE performance & operation, please flush and fill steering system with OE approved power steering fluid.

Product Features:

Manufactured Again Certified quality process
Each unit is 100% hydraulically tested for pressure and flow.
Racks are remanufactured with OE grade, high temperature seals and O-rings for increased durability and performance.

from

$235.99

NEW P/S PUMP

from

$218.99

NEW P/S PUMP

from

$188.99

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Manufactured in Korea

Top Picks for 2005 Kia Optima Ball Joints

Upgrade Kia Optimas with top-quality Ball Joints parts, including 13 OEM and aftermarket selections for your 2005 model.

show more show less

from

$125.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$117.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$127.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$40.49

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$33.99

Ball Joint

from

$83.99

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$128.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$128.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$72.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$169.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$169.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$59.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$45.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

In-Demand Steering Shafts for 2005 Kia Optimas

Select from 2 premium Steering Shafts parts for your 2005 Kia Optima, with prices ranging from $5.49 to $6.99.

show more show less

from

$6.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$5.49

Product Features:

Brand may vary by location

Most Sold 2005 Kia Optima Sway Bars

Explore our best-selling Kia parts for the 2005 Optima among 6 OEM and aftermarket options starting from $24.79.

show more show less

from

$46.49

Product Features:

EASY TO INSTALL – Wrench flats ensure easy installation and removal
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$45.49

Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating on steel links to reduce rust and extend service life
Hex formed studs for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Hardware included for easier installation (where applicable)

from

$24.79

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$59.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$52.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$37.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

Top-Rated Steering and Chassis Parts Brands For Your 2005 Kia Optima

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2005 Kia Optimas. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, Dorman, and Imperial, and more. Steering and Chassis Parts from these brands that fit a 2005 Optima start at just $11.99 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2005 Kia Optima Steering and Chassis Parts

When it comes to maintaining or upgrading your 2005 Kia Optima, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2005 Kia Optima. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $40.49, with an average price of just $68.32. Plus, with over 24 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $117.99

(1)

Suspension Ball Joint

“worked great…old was a pain taking out.. the new one slipped in an tightened down in 10 minutes, 1 camber adjustment an it was like brand new car”

from $46.49

(17)

Suspension Stabilizer Bar Link

“Better quality than the OEM. Came with everything needed.”

from $40.49

(6)

Suspension Ball Joint

“Great price. Good quality product. Fits perfect and worked as intended. Thank you.”

Popular Dorman 2005 Kia Optima Steering and Chassis Parts

Dorman auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2005 Kia Optima owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2005 Optima, Advance Auto Parts carries a full inventory of 2 Dorman Steering and Chassis Parts. Plus you will be keeping your Kia in peak condition while saving money because prices on these Dorman Steering and Chassis Parts range from $125.99 to $127.99, plus, with more than 3 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $125.99

(1)

Suspension Control Arm

“I normally buy Moog for my suspension parts and accessories, but my budget could only accomodate the non-name brand part. I was surprised and happy th”

from $127.99

(2)

Suspension Control Arm

“I normally buy Moog for my suspension parts and accessories, but my budget could only accomodate the non-name brand part. I was surprised and happy th”

FAQs for 2005 Kia Optima Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2005 Kia Optimas?

Out of 62 Steering and Chassis Parts that fit 2005 Kia Optimas, the following parts are the top sellers:

New Power Steering Filter (10417593) – $32.99
Rack & Pinion Bellows Kit (20518165) – $8.99
Suspension Stabilizer Bar Link (20516456) – $46.49

What’s the price range for 2005 Kia Optima Steering and Chassis Parts?

Steering and Chassis Part prices for the 2005 Kia Optima start at $5.49 and go up to $579.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2005 Kia Optima?

The average price for Steering and Chassis Parts for the 2005 Kia Optima is $103.82. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Kia Optima model years?

Yes, we currently carry Steering and Chassis Parts for 18 model years of Kia Optimas between 2001 and 2020. Steering and Chassis Parts are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Steering and Chassis Parts for my 2005 Kia Optima?

The cheapest 2005 Kia Optima Steering and Chassis Parts we carry in stock are:

Oil Pump Seal (11494074) – $5.49
Multi-Purpose Seal (18442610) – $6.99
Power Steering Filter (50167394) – $7.99
Rack & Pinion Bellows Kit (20518165) – $8.99
Mounting Kit System (6014844) – $11.99

What are the top-rated Steering and Chassis Parts that fit the 2005 Kia Optima?

Out of 1,304 reviews by customers, our 2005 Kia Optima Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2005 Kia Optima and their top-rated products:

Sway Bars
- Suspension Stabilizer Bar Link (20516456) – $46.49

What types of Steering and Chassis Parts do you sell for my 2005 Kia Optima?

As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2005 Kia Optima:

Can I get help with 2005 Kia Optima Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Kia Steering and Chassis Parts and more.

What is your return policy for Kia Optima Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Kia Optima Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 Kia Optima Steering and Chassis Parts

Rare Parts – Sway Bar Frame Bushing (Part No.RP22176)

Lares – Remanufactured Power Steering Pump (Part No.3610)

Atlantic Automotive Eng – P/S FLUID RESERVOIR (Part No.RES-0085)

Rare Parts – Rack & Pinion Bellows (Part No.RP57363)

MOOG – Suspension Stabilizer Bar Link (Part No.K750788)

MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK623733)

BBB Industries – Power Steering Filter (Part No.991-FLT1)

National – Multi-Purpose Seal (Part No.222025)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo (Part No.37696)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo (Part No.37695)

Powercraft – Rack Pinion Seal Kit (Part No.8948)

Rare Parts – Ball Joint (Part No.RP11671)

Carquest Premium – Ball Joint (Part No.410-498365)

MOOG – Suspension Ball Joint (Part No.K500231)

MOOG – Suspension Ball Joint (Part No.K80621)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Mounting Kit System (Part No.226201)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2412)

Atlantic Automotive Eng – NEW RACK & PINION (Part No.3790N)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1026)

MOOG – Steering Tie Rod End (Part No.ES800346)

Rare Parts – Tie Rod End (Part No.RP28946)

Dorman – Steering Knuckle (Part No.698-089)

Dorman – Knuckle (Part No.686-452)

Dorman – Steering Knuckle (Part No.698-286)

Carquest Premium – Power Steering Return Hose, 16mm Male "O" Ring x 3/8" I.D. Hose (Part No.37876)

Carquest Premium – Power Steering Return Hose Assembly, 3/8" I.D. Hose x 3/8" I.D. Hose (Part No.37881)

Carquest Premium – 3/8" Beaded Tube x 3/8" Beaded Tube (Part No.38070)

Rare Parts – Tie Rod End (Part No.RP28946)

Rare Parts – Tie Rod End (Part No.RP28336)

Rare Parts – Tie Rod End (Part No.RP28337)

MANDO – New OE Steering Tie Rod End, Direct Replacement (Part No.15A0020)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Imperial – Mounting Kit System (Part No.226201)

Cardone – Remanufactured Power Steering Pump (Part No.21-5253)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Female Inv. Flare x 16mm Banjo (Part No.35500)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo (Part No.37215)

Imperial – Power Steering Oil Cooler (Part No.241009)

MOOG – Rack & Pinion Bellows Kit (Part No.K90440)

Cardone – Power Steering Filter (Part No.20-P038F)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Powercraft – Rack Pinion Seal Kit (Part No.8948)

MANDO – New OE Power Steering Pump, Direct Replacement (Part No.20A1004)

Carquest Premium – Power Steering Return Hose Assembly, 3/8" I.D. Hose x 3/8" I.D. Hose (Part No.38041)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1026)

Cardone New – New Power Steering Reservoir (Part No.3R-313)

Carquest Premium – Power Steering Pressure Tube Assembly, 14mm Male Inv. Flare x 14mm Male "O" Ring (Part No.37212)

Atlantic Automotive Eng – NEW RACK & PINION (Part No.3788N)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2412)

Atlantic Automotive Eng – Remanufactured Rack & Pinion (Part No.3788)

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5728N)

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5727N)

MANDO – New OE Power Steering Pump, Direct Replacement (Part No.20A1016)

Dorman – Suspension Control Arm (Part No.520-533)

MOOG – Suspension Ball Joint (Part No.K7452)

Dorman – Suspension Control Arm (Part No.520-534)

MOOG – Suspension Ball Joint (Part No.K80621)

Driveworks – Ball Joint (Part No.DW-K7452)

MOOG – Rear Lower Forward Suspension Control Arm and Ball Joint Assembly (Part No.RK621852)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620104)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620103)

Dorman – Suspension Control Arm (Part No.522-167)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP11827)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP11828)

Rare Parts – Ball Joint (Part No.RP11332)

Rare Parts – Ball Joint (Part No.RP11671)

National – Multi-Purpose Seal (Part No.222025)

Driveworks – Oil Pump Seal (Part No.S-222025)

MOOG – Suspension Stabilizer Bar Link (Part No.K6662)

Carquest Premium – Stabilizer Bar Link (Part No.512-94867)

MOOG – Suspension Stabilizer Bar Link (Part No.K90369)

Rare Parts – Sway Bar Link (Part No.RP18623)

Rare Parts – Sway Bar Link (Part No.RP18624)

Rare Parts – Sway Bar Bushing (Part No.RP16778)