2005 Jeep Wrangler Bodies and Fender Parts

Hurricane Fender Fla

LiftgateSeal

Keep your rocker panels from being beaten to a pulp on the trail with Rugged Ridge’s Side Armor. Built from heavy-duty 2 x 0.120 inch black texture powdercoated steel tubing, these guards will take the beating that was meant for your body sheet metal. Sim

Product Features:

• Black
• Mounts To Existing Body Mounts
• Protects Rocker Panels
• Uses Factory Hardware
• Limited 5 Year Warranty

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

• Replace to Restore Ride Height
• Gain Durability
• Stronger Than Original Rubber Mounts

Screw; Spare Tire Ca

The new Spare Tire Light Mount from Rugged Ridge offers a utility light mount that is easily removable for access to the spare tire, and also offers you a place to relocate the license plate from the vulnerable original location. Textured black steel cons

Product Features:

• Black
• Relocates License Plate
• Mount Most Style of Lights
• Limited 5 Year Warranty

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

This black RRC rear bumper tire carrier has a frame mounted platform that features a heavy duty grid like system with raised sides for the ultimate protection and greatest ground clearance. Features 5X 4.5 bolt pattern. All RRC rear bumpers feature a rein

Product Features:

• Black

Interior Panel Retai

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

Is your front fender rusty or dented? Omix-ADA offers high-quality replacements that will restore the original look to your Jeep. Why try to fix your old fender when you can start with a new one?

Product Features:

• Steel
• OE Style
• Direct Fit
• Primered
• Limited 5 Year Warranty

Spartan Nerf Bar; Te

Get that aggressive off road look with the Rugged Ridge All Terrain Fender Flares! These flares feature a stylish design while protecting your vehicles paint from flying rocks and mud. Constructed of durable UV treated ABS with a slight texture, these pai

Product Features:

• Left Rear
• ABS plastic
• UV Treated
• No Drilling Required
• Paintable

Protect your spare tire from sun’s rays with this heavy-duty Spare Tire Cover, available in a wide range of colors and sizes to suit your needs.

Product Features:

• Protects Spare Tire From Suns Rays
• Heavy Duty Denim Soft Top Material
• Elastic Strap to Insure Snug Fit

This black replacement T-style fender flare and rocker panel molding clip from Omix-ADA allows you to attach your factory fender flares to the sides of your Jeep. The clip is constructed of durable thermoplastic material and injection molded for a direct

Product Features:

• Black
• OE Style
• Direct Fit
• Attach Your Fender Flares To Sides Of Your Jeep
• Limited 5 Year Warranty

This floor support is designed to match the fit and function of the original support on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – this floor channel repair kit installs in place over the damaged section of the bodywork without the need to fabricate a repair piece
• Ready to install – this repair panel is pre-formed for a precise fit and is finished in weldable primer for a clean installation
• Application specific – made to match the dimensions and material for certain Jeep Wrangler application
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Get that offroad look with Rugged Ridge Body Armor! Each Body Armor piece is constructed of black diamond plate looking UV treated thermoplastic for the coolest, toughest looking up-grade for your Jeep. Each body armor attaches to your Jeep with ultra str

Product Features:

• Black Diamond Plate Thermoplastic
• UV Treated
• Attaches w/ Automotive Grade Double Sided Tape
• Covers Typical Scratched and Dented Areas
• Limited 5 Year Warranty

Looking for some protection for the bottom and lower side panels of your vehicle to prevent mud and water splatters? Rugged Ridge has you covered with our Splash Guards! Featuring high quality injection molded TPE material; these guards are paintable and

Product Features:

• Black
• 4 piece

Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications Comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Foam Construction
• Meets Quality Standards
• Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
• Easy To Install

Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

New Standard Replacement Passenger Side Floor Brace, 53 X 13 X 6

Product Features:

• 53 X 13 X 6, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Plastic Construction
• Meets Quality Standards
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy To Install

This spice ultimate locking console is the best storage solution for your Jeep. Each console is constructed of vinyl wrapped around plastic coated hard wood to keep moisture out and provide a great looking addition that matches the interior of your Jeep.

Product Features:

• Spice
• Locking Top Compartment
• 6 Can Cooler
• Hardware Included
• Weather Resistant

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Steel
• OE Style
• Direct Fit
• Single
• Limited 5 Year Warranty

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1987-1995 Wrangler, Body Fastener Kit, With Soft Top (703 Pieces)

The TCR bag has been designed to mount to Rugged Ridge RRC, XHD and Classic rear tire carrier bumpers. This bag allows the storage of all your recovery gear between the A-frame uprights on your rear tire carrier. Constructed of weather resistant material

Product Features:

• Textured Black