2005 Jeep Grand Cherokee Steering and Chassis Parts

Essential 2005 Jeep Grand Cherokee Steering and Chassis Parts

Omega – P/S Return Hose (Part No.M2016523948OME)

P/S Return Hose

from

$49.50
P/S Return Hose

Cardone – Rack and Pinion Assembly (Part No.22-3075)

Rack and Pinion Assembly

from

$527.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Omix – Screw; Trim Panel; 9 (Part No.11840.04)

Screw; Trim Panel; 9

from

$4.49
Screw; Trim Panel; 9

Cardone – Power Steering Pump (Part No.20-2205)

Power Steering Pump

from

$152.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Dorman – Power Steering Cooler (Part No.918-340)

Power Steering Cooler

from

$163.99
This power steering cooler is designed to match the fit and function of the original cooler on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this power steering cooler is designed to match the fit and function of the original cooler on specified vehicles
  • Ideal solution – this power steering cooler is a reliable replacement for a failed original cooler
  • Durable construction – made from quality, corrosion-resistant components to ensure reliable performance and long service life
  • Trustworthy quality – backed by a team of product engineers based in the United States
See More

Driveworks – Tie Rod End (Part No.DW-EV80782)

Tie Rod End

from

$20.99
Tie Rod End

Carquest Premium – Bulk – 1/2" I.D. Reservoir Hose (Part No.36209)

Bulk - 1/2" I.D. Reservoir Hose

from

$43.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Energy Suspension – Track Arm Bushing Set (Part No.2.7103G)

Track Arm Bushing Set

from

$21.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Driveworks – Sway Bar Bushing (Part No.DW-K3170B)

Sway Bar Bushing

from

$9.29
Sway Bar Bushing

National – Bearings (Part No.LM67010)

Bearings

from

$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Omix – Power Steering Pump Pulley (Part No.18011.01)

Power Steering Pump Pulley

from

$59.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Easy Installation
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Pitman Arm Seal Repair Kit (Part No.18005.03)

Pitman Arm Seal Repair Kit

from

$32.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Complete Kit
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Carquest Premium – Stabilizer Bar Link Kit (Part No.512-497183)

Stabilizer Bar Link Kit

from

$42.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

MOOG – Stabilizer Bar Link Kit (Part No.K700528)

Stabilizer Bar Link Kit

from

$22.79
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
  • PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
  • RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Omix – Power Steering Return Hose (Part No.18014.09)

Power Steering Return Hose

from

$25.49
Is your Jeep’s power steering hose leaking? Tired of adding fluid? Omix-ADA offers high-quality replacements that will give you years of service and get you back on the road.

Product Features:
  • Synthetic Rubber
  • OE Style
  • Direct Fit
  • Oil Resistant
  • Limited 5 Year Warranty
See More

MOOG – Tie Rod End (Part No.DS1310)

Tie Rod End

from

$151.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

KYB – Steering Stabilizer (Part No.SS10317)

Steering Stabilizer

from

$44.99
KYB Steering Stabilizers are designed to stop vibrations before they reach the driver. By damping steering shimmy and front-end vibrations, KYB Steering Stabilizers provide more tire control and provide critical performance for 4WD and off-road applications.

Product Features:
  • Recommended One Replacement Steering Stabilizer
  • Built To Help Restore Handling And Performance On Gm Trucks
  • Helps Maintain Control On The Road Or In Rugged Terrain
  • Engineered To Decrease Wheel Shimmy For Reduced Tire Wear And Steering Vibration
See More

MOOG – Track Bar (Part No.RK660154)

Track Bar

from

$75.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Construction and design validated by MOOG engineers
  • Broad coverage for foreign and domestic applications
See More

MOOG – Ball Joint (Part No.K3134T)

Ball Joint

from

$84.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Carquest Premium – Pressure Hose (Part No.37822)

Pressure Hose

from

$134.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Carquest Premium – Pressure Hose Assembly (Part No.35309)

Pressure Hose Assembly

from

$38.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Powercraft – Rack Pinion Seal Kit (Part No.9160)

Rack Pinion Seal Kit

from

$164.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – Ball Joint (Part No.RP71294)

Ball Joint

from

$223.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Carquest Premium – Ball Joint (Part No.400-637382)

Ball Joint

from

$56.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Knurling improves retention between the control arm/knuckle and ball joint housing
  • Snap ring design adds an additional safety feature to secure the ball joint in the knuckle
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621607)

Control Arm and Ball Joint Assembly

from

$162.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
  • QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
  • GREASEABLE SOCKETá–┐Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants┐
  • HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
See More

Dorman – Suspension Control Arm (Part No.522-971)

Suspension Control Arm

from

$76.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK100169)

Control Arm and Ball Joint Assembly

from

$114.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

2005 Jeep Grand Cherokee Steering and Chassis Parts

You count on your 2005 Jeep Grand Cherokee to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 78 Steering and Chassis Parts ranging in price from $2.99 to $1,037.99, you’re sure to find everything you need for your 2005 Jeep Grand Cherokee.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 16 different brands like Imperial, Carquest Premium, and Cardone. 2005 Jeep Grand Cherokee Steering and Chassis Parts start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,252 extensive product reviews on 2005 Jeep Grand Cherokee Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Control Arm and Ball Joint Assembly with 4.3 stars and Steering Stabilizer with 4.4 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2005 Jeep Grand Cherokee below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2005 Jeep Grand Cherokee

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Jeep Grand Cherokee running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.

Popular Carquest Premium Steering and Chassis Parts

You’ll find popular Carquest Premium brand products across Power Steering Parts and Sway Bars. All are waiting to get your 2005 Jeep Grand Cherokee back on the road. Some of the top-rated Carquest Premium products in these categories are:
Pressure Hose Assembly
from $122.99
(1)
Pressure Hose Assembly
Power Steering Pressure Hoses
Stabilizer Bar Link Kit
from $56.99
(1)
Stabilizer Bar Link Kit
Sway Bar Link Kits
Bulk - 3/8" I.D. Return Hose CPE
from $38.99
(8)
Bulk – 3/8" I.D. Return Hose CPE
Power Steering Reservoir Hoses

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2005 Jeep Grand Cherokee, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 2005 Jeep Grand Cherokee Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2005 Jeep Grand Cherokee?

Out of 78 Steering and Chassis Parts for the 2005 Jeep Grand Cherokee, the most popular in our inventory are:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
Ball Joint
from $66.99
(7)
Ball Joint
Lower Ball Joints

What are the top-rated 2005 Jeep Grand Cherokee Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2005 Jeep Grand Cherokee based on customer reviews/ratings are:
Control Arm and Ball Joint Assembly
from $109.99
(7)
Control Arm and Ball Joint Assembly
“Perfect fit”
Steering Stabilizer
from $44.99
(5)
Steering Stabilizer
“Would be helpful to have help instructions on how to remove old taper sleeve. Ended up applyiing heat to he sterring tie rod to release the tapered bo”
Stabilizer Bar Link
from $40.49
(5)
Stabilizer Bar Link
“Perfect fit.”