2005 Isuzu Ascender Drivetrains

Popular 2005 Isuzu Ascender Drivetrains Categories

Essential Drivetrains for 2005 Isuzu Ascenders

ATP – Front Axle Disconnect Gear Pod (Part No.111001)

Front Axle Disconnect Gear Pod

from

$958.99
ATP Front Axle Disconnects are NEW, not remanufactured assemblies. These parts are found on Buick, Chevrolet, GMC, Oldsmobile, and Saab SUV’s. Their purpose is to allow the drive to disengage from four wheel drive or all wheel drive to rear wheel drive.

Product Features:
  • 100% new product content
  • No core
  • No longer available from the GM dealer as a complete assembly
See More

Yukon Gear – Pinion Install Kit For ’08 & Down GM 8.6" Differential (Part No.13073)

Pinion Install Kit For '08 & Down GM 8.6" Differential

from

$167.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 2008 and down GM 8.6″
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Spartan – Drive Axle Assembly; GM SUV 02-05 Axle (Part No.RAX2118B)

Drive Axle Assembly; GM SUV 02-05 Axle

from

$1865.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Carquest – Four Wheel Drive Selector Switch (Part No.FWA126)

Four Wheel Drive Selector Switch

from

$37.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High-quality materials withstand extreme conditions
  • Undergoes extensive testing to ensure reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

FAG US – CONE (Part No.KLM603049)

CONE

from

$23.79
CONE

Motive Gear – Ring Gear Bolt (Part No.14066913)

Ring Gear Bolt

from

$2.49


Product Features:
  • RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND
See More

Felpro – Differential Cover Gasket (Part No.RDS 55028-1)

Differential Cover Gasket

from

$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (Part No.05177)

Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm

from

$11.79
Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Yukon Gear – 10 Bolt Open Spider Gear Set For ’00-’06 8.6" GM With 30 Spline Axles (Part No.16056)

10 Bolt Open Spider Gear Set For '00-'06 8.6" GM With 30 Spline Axles

from

$207.99
10 Bolt open spider gear set for ’00-’06 8.6″ GM with 30 spline axles. Fits case with one large window and one small window. A new carrier case will be needed for ’99 vehicles in order to use this spider gear set. This spider gear set fits casting number 7875 & 1073.

Product Features:
  • Spider gear kit
  • Fits 2000-2006 GM 8.6″ open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Yoke For 8" GM (Mech 3R) (Part No.41073)

Yoke For 8" GM (Mech 3R)

from

$261.99
Yukon yoke for 8″ GM (mech 3R) with a U/joint size. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.0″
  • 27 spline
  • Mechanics 3R u-joint size
  • Inside snap ring design
  • 2.556″ snap ring span
  • 1.125″ cap diameter
  • Strap style
See More

Spicer – Universal Joint (Part No.5-795X)

Universal Joint

from

$50.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Felpro – Differential Cover Gasket (Part No.RDS 55479)

Differential Cover Gasket

from

$41.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Spartan – Drive Axle Assembly; GM SUV 02-05 Posi Axle (Part No.RAXP2118A)

Drive Axle Assembly; GM SUV 02-05 Posi Axle

from

$1923.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Motive Gear – Pinion Nut (Part No.1260823)

Pinion Nut

from

$8.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

National – Multi Purpose Seal (Part No.710506)

Multi Purpose Seal

from

$16.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Seal (Part No.710660)

Multi Purpose Seal

from

$56.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Cross Pin Shaft For 7.5", 7.625", And 8" GM (Part No.33404)

Cross Pin Shaft For 7.5", 7.625", And 8" GM

from

$57.99
Cross pin shaft for 7.5″, 7.625″, and 8″ GM.

Product Features:
  • Cross pin shaft for GM 7.5″, 7.625″ and 8.0″
  • Fits standard open differentials only
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Dorman – Rear Axle Shaft, Right (Part No.630-153)

Rear Axle Shaft, Right

from

$316.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

National – Bearings (Part No.FC-66561)

Bearings

from

$13.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

FAG US – AXLE SHAFT REPAIR BE (Part No.DR0151K)

AXLE SHAFT REPAIR BE

from

$109.99
AXLE SHAFT REPAIR BE

Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$404.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Carbon fiber clutches
See More

Motive Gear – Differential Ring and Pinion (Part No.GM10-411A)

Differential Ring and Pinion

from

$179.99


Product Features:
  • GM 10BL 8.5 R/P 4.11A MG FRT/REAR
See More

Motive Gear – Differential Ring and Pinion (Part No.GM7.5-342A)

Differential Ring and Pinion

from

$175.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Upgrade your 2005 Isuzu Ascender with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2005 Isuzu Ascender, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Isuzu or enhancing its overall performance, Drivetrains are key to keeping your Ascender functioning at its best. At Advance Auto Parts, we offer a wide selection of 271 Drivetrains for the 2005 Isuzu Ascender, designed to meet your needs without breaking the bank. From Universal Joint replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2005 Isuzu Ascender at great prices. Our Drivetrains inventory for this model ranges from just $2.49 to $1,923.99, with an average price of $223.84. Our 271 Drivetrains in stock come from 26 trusted brands, so you’re sure to find the right part for your 2005 Isuzu Ascender without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Isuzu Ascender, we stock popular OEM and aftermarket Drivetrains from top names like FELPRO, Moog, Driveworks, and more. FELPRO Drivetrains start at just $9.99 and boast an impressive 5 stars average rating from customers. Moog and Driveworks also bring quality to the table, with Drivetrains available starting at $6.79, and at an average 4 stars rating. With 3,434 customer reviews and counting, our 2005 Isuzu Ascender Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Isuzu Ascender is always ready to roll. We’re committed to providing you with everything you need to keep your Ascender in top shape, all in one place. Start shopping confidently below for your 2005 Isuzu Ascender!

Best-Selling Universal Joints for 2005 Isuzu Ascenders

Enhance the driving experience in your Isuzu with 20 quality Universal Joint components, starting at $2.59.

Driveworks – Universal Joint (Part No.DW-445)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Neapco – Universal Joint (Part No.1-0025)

Universal Joint

from

$2.59
Universal Joint Strap Kit
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)

Greaseable Premium Universal Joint

from

$26.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Cross forging shape and flash provide easier installation and high strength
See More

Driveworks – Universal Joint (Part No.DW-534G)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging to provide higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting allows for easy maintenance and the flexible use of the entire assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals are applied to optimize grease retention and reduce contamination
See More

MOOG Driveline Products – Universal Joint Strap Kit (Part No.530-10)

Universal Joint Strap Kit

from

$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 355, 372 & 534G
  • Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.234)

Non-Greaseable Super Strength Universal Joint

from

$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

Spicer – Universal Joint (Part No.5-795X)

Universal Joint

from

$50.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Neapco – Universal Joint (Part No.2-3010)

Universal Joint

from

$8.99
Universal Joint
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.235)

Greaseable Super Strength Universal Joint

from

$34.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

Spicer – Universal Joint (Part No.5-3147X)

Universal Joint

from

$32.49
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Driveworks – Universal Joint (Part No.DW-235)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.445)

Greaseable Premium Universal Joint

from

$24.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Cross forging shape and flash provide easier installation and high strength
See More

Neapco – Universal Joint (Part No.2-3011)

Universal Joint

from

$4.59
Universal Joint
See More

Dorman – Help – U-Joint Repair Kit (Part No.81001)

U-Joint Repair Kit

from

$11.49
This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

MOOG Driveline Products – Universal Joint Strap Kit (Part No.360-10)

Universal Joint Strap Kit

from

$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 354, 368, 369, 445 & 455
  • Contains two 1.59″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
See More

Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

1310 To Mechanics 3R Adapter U/Joint

from

$109.99
Yukon 1310 to Mechanics 3R adapter U/Joint.
See More

Yukon Gear – Mechanics 3R Lifetime Series U/Joint (Part No.42020)

Mechanics 3R Lifetime Series U/Joint

from

$65.99
Yukon Mechanics 3R Lifetime Series U/Joint. 2.556″ span ring span, 1.125″ cap diameter. Inside snap ring.
See More

Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)

Forged Yoke For GM 8.5" With A 1350 U/Joint Size

from

$359.99
Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Forged steel
See More

Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

1350 To Mechanics 3R Adaptor U/Joint

from

$111.99
Yukon 1350 to Mechanics 3R adaptor U/joint.
See More

Yukon Gear – Mechanics 3R U/Joint (Part No.42014)

Mechanics 3R U/Joint

from

$46.99
Yukon Mechanics 3R U/Joint. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring.
See More

Most Popular 2005 Isuzu Ascender Drive Shafts and Axles

Customize your Isuzu with 27 Drive Shafts and Axles products like Drive Shaft and Axles, Axle Shaft Seals, and Center Support Bearings, all priced under $1,865.99.

National – Multi Purpose Seal (Part No.710648)

Multi Purpose Seal

from

$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Shaft Repair Sleeve (Part No.99174)

Shaft Repair Sleeve

from

$45.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10248)

CV Axle Shaft Assembly

from

$127.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More

Yukon Gear – Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal (Part No.41150)

Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal

from

$24.99
Product Features:
  • Fits GM 8.6″ and 9.5″
  • Sleeve to adapt standard yoke to use late model triple lip pinion seal
See More

Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)

GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit

from

$89.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • 2.800″ O.D.
  • 1.620″ I.D.
See More

GM Genuine Parts – Front Drive Axle Inner Shaft Bearing (Part No.26053326)

Front Drive Axle Inner Shaft Bearing

from

$13.49
GM Genuine Parts Axle Shaft Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support and allow the axle shaft to rotate with minimal friction. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Supports and allows the axle shaft to rotate with minimal friction
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

National – Bearings (Part No.HK-4012)

Bearings

from

$24.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)

C/Clip For GM 7.5", 7.6" & 8"

from

$14.99
Product Features:
  • c-clip for GM 7.5″, 7.625″ and 8.0″
See More

Yukon Gear – Axle Seal For ’88 And Newer GM 8.5" Chevy C10 (Part No.30108)

Axle Seal For '88 And Newer GM 8.5" Chevy C10

from

$11.99
Axle seal for ’88 and newer GM 8.5″ Chevy C10.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Fits 1988 and up GM half ton truck
  • 2.800″ O.D.
  • 1.620″ I.D.
See More

Driveworks – Axle Shaft Seal (Part No.S-710648)

Axle Shaft Seal

from

$10.79
Product Features:
  • Brand may vary by location
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Yoke For 8" GM (Mech 3R) (Part No.41073)

Yoke For 8" GM (Mech 3R)

from

$261.99
Yukon yoke for 8″ GM (mech 3R) with a U/joint size. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.0″
  • 27 spline
  • Mechanics 3R u-joint size
  • Inside snap ring design
  • 2.556″ snap ring span
  • 1.125″ cap diameter
  • Strap style
See More

National – Bearings (Part No.107)

Bearings

from

$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Spartan – Drive Axle Assembly; GM SUV 02-05 Axle (Part No.RAX2118B)

Drive Axle Assembly; GM SUV 02-05 Axle

from

$1865.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Dorman – Rear Drive Shaft (Part No.936-554)

Rear Drive Shaft

from

$968.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-028)

Rear Drive Shaft: Adjustable

from

$686.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft (Part No.936-518)

Rear Drive Shaft

from

$638.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Front Drive Shaft (Part No.938-307)

Front Drive Shaft

from

$605.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-104)

Rear Drive Shaft: Adjustable

from

$604.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9330)

Drive Shaft: Not Greasable, Direct Replacement

from

$385.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Dorman – Front Drive Shaft: Adjustable (Part No.938-190)

Front Drive Shaft: Adjustable

from

$292.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

FAG US – AXLE SHAFT REPAIR BE (Part No.DR0151K)

AXLE SHAFT REPAIR BE

from

$109.99
AXLE SHAFT REPAIR BE

FAG – Wheel Bearing (Part No.K8000204410FAG)

Wheel Bearing

from

$75.93
Wheel Bearing

Autopart International Inc – Wheel Bearing (Part No.K8000651790API)

Wheel Bearing

from

$44.91
Wheel Bearing

Timken – Axle Shaft Seal (Part No.K4021204340TIM)

Axle Shaft Seal

from

$19.30
Timken understands how important seals are in the automotive industry. Leveraging our knowledge and experience with bearings, we offer a broad line of light-duty oil seals made exclusively for Timken in some of the world’s most advanced manufacturing plants.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

Driveworks – Axle Shaft Bearing (Part No.S-HK-4012)

Axle Shaft Bearing

from

$10.79
Product Features:
  • Brand may vary by location
See More

Top Picks for 2005 Isuzu Ascender Transfer Cases

Upgrade Isuzu Ascenders with top-quality Transfer Cases parts, including 21 OEM and aftermarket selections for your 2005 model.

National – Bearings (Part No.M88048)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Felpro – TRANSFER CASE GASKET SET (Part No.72769)

TRANSFER CASE GASKET SET

from

$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Transfer Case Shift Motor (Part No.600-903)

Transfer Case Shift Motor

from

$221.99
Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

Product Features:
  • Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications.
  • Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion.
  • 100% new – this transfer case motor is entirely new, not remanufactured like competitors
  • Quality assured – vehicle-specific application has been validation tested to ensure quality
See More

ACDelco – Vehicle Speed Sensor (Part No.19302667)

Vehicle Speed Sensor

from

$59.99
ACDelco GM Original Equipment Vehicle Speed Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

National – Multi Purpose Seal (Part No.710660)

Multi Purpose Seal

from

$56.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.710692)

Multi Purpose Seal

from

$25.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Cardone – Remanufactured Transfer Case Motor (Part No.48-101)

Remanufactured Transfer Case Motor

from

$304.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

Product Features:
  • All motors are 100% torque tested to ensure strength for proper gear engagement.
  • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
  • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
  • Motor magnets are 100% recharged for superior performance and reliability.
  • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

National – Bearings (Part No.N-5210-KLB)

Bearings

from

$53.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

EVO Driveline – Remanufactured Transfer Case (Part No.UMT136-2M)

Remanufactured Transfer Case

from

$1524.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:
  • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
  • OEM cores are processed as individual units throughout the tear down and assembly process
  • Cores cleaned using our Hydro Blast cleaning and rinse process
  • All case halves wet sanded to ensure perfect mating surfaces
  • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
  • Remanufactured in our ISO9001:2008 USA facility.
  • Without Motor
See More

EVO Driveline – Transfer Case Assembly (Part No.UMT136-2)

Transfer Case Assembly

from

$1214.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:
  • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
  • OEM cores are processed as individual units throughout the tear down and assembly process
  • Cores cleaned using our Hydro Blast cleaning and rinse process
  • All case halves wet sanded to ensure perfect mating surfaces
  • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
  • Remanufactured in our ISO9001:2008 USA facility.
  • Without Motor
See More

Dorman – Transfer Case Motor (Part No.J7100720039DOR)

Transfer Case Motor

from

$324.44
Transfer Case Motor

USA Standard Gear – TCaseBrg-SealKit (Part No.72422)

TCaseBrg-SealKit

from

$179.99
TCaseBrg-SealKit

EVO Driveline – Transfer Case Motor (Part No.UMM1226)

Transfer Case Motor

from

$172.99
Transfer Case Motor

FAG US – GENERAL SEAL (Part No.SS3130)

GENERAL SEAL

from

$35.99
GENERAL SEAL

FAG US – CONE (Part No.KM86649)

CONE

from

$18.99
CONE

USA Standard Gear – TCase Seal (Part No.73897)

TCase Seal

from

$14.99
TCase Seal

FAG – Trans Case Output Sh (Part No.J7121222702FAG)

Trans Case Output Sh

from

$14.77
Trans Case Output Sh

National – Bearings (Part No.FC-66561)

Bearings

from

$13.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

FAG US – CUP (Part No.M88010)

CUP

from

$11.29
CUP

USA Standard Gear – TRANSFER CASE PARTS (Part No.72958)

TRANSFER CASE PARTS

from

$9.99
TRANSFER CASE PARTS

In-Demand Differentials for 2005 Isuzu Ascenders

Select from 192 premium Differentials parts for your 2005 Isuzu Ascender, with prices ranging from $2.49 to $1,923.99.

Felpro – Differential Cover Gasket (Part No.RDS 55479)

Differential Cover Gasket

from

$41.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

National – Multi Purpose Seal (Part No.710474)

Multi Purpose Seal

from

$19.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Motive Gear – Differential Ring and Pinion (Part No.GM10-342A)

Differential Ring and Pinion

from

$235.99


Product Features:
  • GM 10BL 8.5 R/P 3.42A MG FRT/REAR
See More

Felpro – Differential Cover Gasket (Part No.RDS 55028-1)

Differential Cover Gasket

from

$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Driveworks – Taper Bearing Set (Part No.S-A-18)

Taper Bearing Set

from

$10.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Axle Differential Bearing and Seal Kit (Part No.RA-321-C)

Axle Differential Bearing and Seal Kit

from

$103.99
The National® bearing & seal kit includes all the components required to complete the repair.

Product Features:
  • COMPLETE SOLUTION — Includes everything needed to complete the repair
  • STRONG AND DURABLE — Controlled heat treatment process for strength and durability
  • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING¿-¿Comprehensive¿testing throughout design and development processes by National engineers for quality you can count on¿
  • RIGOROUS TESTING┐-┐Comprehensive┐testing throughout design and development processes by National engineers for quality you can count on┐
  • Professional technicians know they can depend on National
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R10RL)

Differential Bearing Kit - Koyo

from

$99.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT-BRG & SEAL GM 8.5 10 BOLT – ’99 & UP LATER
See More

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R10RLMK)

Differential Master Bearing Kit - Koyo

from

$157.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • BEARING GASKET & SEAL KIT, 10 BOLT GM ’99 AND UP MASTER KIT
See More

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

Type TLS Automatic Transmission Fluid - 1 qt

from

$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Motive Gear – Differential Ring and Pinion (Part No.GM10-373A)

Differential Ring and Pinion

from

$241.99


Product Features:
  • GM 10BL 8.5 R/P 3.73A MG FRT/REAR
See More

National – Bearings (Part No.M802048)

Bearings

from

$23.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Seal (Part No.710506)

Multi Purpose Seal

from

$16.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Motive Gear – Differential Ring and Pinion (Part No.GM10-373)

Differential Ring and Pinion

from

$243.99


Product Features:
  • GM 10BL 8.5 R/P 3.73 MG FRT/REAR
See More

Motive Gear – Differential Carrier Shim Kit (Part No.1101)

Differential Carrier Shim Kit

from

$8.49
High-quality Differential Carrier Shim Kit

Product Features:
  • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
See More

Motive Gear – Pinion Nut (Part No.1260823)

Pinion Nut

from

$8.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Motive Gear – Ring Gear Bolt (Part No.14066913)

Ring Gear Bolt

from

$2.49


Product Features:
  • RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND
See More

Yukon Gear – Differential Cover B (Part No.33572)

Differential Cover B

from

$7.99
Differential Cover B

Yukon Gear – Ring Gear Bolt (Part No.33049)

Ring Gear Bolt

from

$6.99
Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

Product Features:
  • Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
  • 7/16″ x 20
See More

Dorman – Help – Pinion Crush Sleeves (Part No.81057)

Pinion Crush Sleeves

from

$5.29
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
  • Required replacement – when servicing the differential
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

8.6" GM Standard Open Side Gear Thrust Washer

from

$4.99
8.6″ GM standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 8.6″
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

Motive Gear – Crush Sleeve (Part No.1234726)

Crush Sleeve

from

$4.29
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Motive Gear – Differential Carrier (Part No.GM8.6L)

Differential Carrier

from

$221.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

Yukon Gear – DiffrlCover (Part No.32360)

DiffrlCover

from

$72.99
DiffrlCover

USA Standard Gear – Standard Spider Gear Set For ’00-’06 GM 8.6" (Part No.39028)

Standard Spider Gear Set For '00-'06 GM 8.6"

from

$209.99
10 Bolt open spider gear set for ’00-’06 8.6″ GM with 30 spline axles. Fits case with one large window and one small window. A new carrier case will be needed for ’99 vehicles in order to use this spider gear set. This spider gear set fits casting number

Product Features:
  • Fits 2000-2006 GM 8.6″ with open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Chrome Cover For 8.6", 8.5" And 8.2" GM Rear (Part No.32017)

Chrome Cover For 8.6", 8.5" And 8.2" GM Rear

from

$74.99
Chrome cover for 8.6″, 8.5″ and 8.2″ GM rear.

Product Features:
  • Fits GM 8.2″, 8.5″ and 8.6″
  • Chrome
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1104)

Differential Pinion Shim Kit

from

$12.99


Product Features:
  • KIT SHIM
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

Yukon Gear – Crush Sleeve (Part No.33110)

Crush Sleeve

from

$5.99
Crush sleeve for GM 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.2″ & 8.2″ Buick/Olds/Pontiac. .625″ long.

Product Features:
  • Crush sleeve for GM 7.5″, 7.625″, 7.6″ IFS, 8.2″ and 8.2″ Buick, Oldsmobile and Pontiac
  • 0.625″ tall
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25" (Part No.55048)

Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25"

from

$57.99
Product Features:
  • Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear
See More

Yukon Gear – Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal (Part No.41210)

Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal

from

$25.99
Yukon 4340 Chrome-Moly replacement outer stub for D44 ’87-’94 Wrangler with a length of 8.31″ and 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • 27 spline
  • 8.31″ long
  • Fits Dana Spicer 30 in 1987-1994 Wrangler
  • Outer stub
  • 5-760X U-joint size
  • 4340 Chromoly
  • For WARN hub conversion only
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.G885488)

Performance Differential Ring and Pinion

from

$232.99


Product Features:
  • GM 10BL 8.5 R/P 4.88 FRT/REAR MGP
See More

Motive Gear – Differential Ring and Pinion (Part No.GM7.5-373)

Differential Ring and Pinion

from

$224.99


Product Features:
  • GM 10BL 7.5&7.625 R/P 3.73 MG 10 3/8 X 18 LH THRED BLTS, PD=1.438
See More

USA Standard Gear – Master Overhaul Kit for the ’99-08 GM 8.6" Differential (Part No.37059)

Master Overhaul Kit for the '99-08 GM 8.6" Differential

from

$239.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 1999-2008 GM 8.6″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck (Part No.55008)

Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck

from

$21.99
Product Features:
  • Pinion depth shims for GM 7.5″, 7.625″, 7.6 IFS, 7.6 IRS, 7.75″, 8.2″, 1955-1964 passenger car and 12 bolt car and truck
See More

Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)

8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer - Also Fits 8.5" Eaton With 0.795" Cross Pin

from

$10.99
8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.

Product Features:
  • Pinion gear thrust washer for GM 8.5″ and 8.6″
  • Fits standard open differentials only
  • 0.795″ I.D.
See More

Yukon Gear – Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles (Part No.26016)

Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles

from

$929.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:
  • Fits GM 8.5″ and 8.6″ with 30 spline axles
  • 2.73 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – 30 Spline Standard Open Loaded Carrier Case, GM 8.6" (Part No.20098)

30 Spline Standard Open Loaded Carrier Case, GM 8.6"

from

$481.99
GM 8.6″ 30 spline standard open loaded carrier. Complete differential case with internals.

Product Features:
  • Standard open carrier case and spiders
  • Fits GM 8.6″
See More

Yukon Gear – 8.6" GM 12P 12T & F8.8 Carrier Installation Kit (Part No.57010)

8.6" GM 12P 12T & F8.8 Carrier Installation Kit

from

$121.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.6″, 12 bolt car and 12 bolt truck differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 12 bolt passenger car and truck and 8.6″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Most Sold 2005 Isuzu Ascender 4WD Components

Explore our best-selling Isuzu parts for the 2005 Ascender among 8 OEM and aftermarket options starting from $37.05.

Dorman – 4WD Actuator, Front Axle (Part No.600-103)

4WD Actuator, Front Axle

from

$117.99
This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:
  • Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models.
  • Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator.
  • Smart solution – delivers reliable fit and function for competitive price
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Carquest – Four Wheel Drive Selector Switch (Part No.FWA126)

Four Wheel Drive Selector Switch

from

$37.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High-quality materials withstand extreme conditions
  • Undergoes extensive testing to ensure reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Dorman – 4 WD Axle Disconnect (Part No.600-115)

4 WD Axle Disconnect

from

$799.99
Our Four-Wheel Drive (4WD) Actuator Housing is quality-engineered to restore the four-wheel drive to proper operation. It includes all the hardware necessary for a complete repair.

Product Features:
  • 4 WD Axle Disconnect
  • 4 WD Axle Disconnect
  • Our Four-Wheel Drive (4WD) Actuator Housing is quality-engineered to restore the four-wheel drive to proper operation. It includes all the hardware necessary for a complete repair.
  • Direct replacement for a proper fit every time
  • Comes with c-clips, washers, bolts and nuts
See More

Dorman – 4 Wheel Drive Axle Disconnect Assembly (Part No.600-115XD)

4 Wheel Drive Axle Disconnect Assembly

from

$585.99
This four-wheel-drive disconnect is a direct replacement for a worn or damaged original equipment part. Made of durable materials for a long service life, this 4WD disconnect has been rigorously tested for a quality fit.

Product Features:
  • Upgraded replacement – the shift fork on this 4WD disconnect uses a forged aluminum alignment pin in place of the original cast aluminum piece for greater durability.
  • Easy to install – this upgraded axle disconnect installs directly in place of the original equipment part.
  • Time-saving solution – this pre-assembled unit saves time compared to rebuilding the 4WD disconnect just to replace a worn shift fork
  • Quality tested – this part has undergone vehicle try-on and material testing to ensure a quality fit and long service life
See More

Dorman – Differential Axle Disconnect Shift Fork (Part No.600-114)

Differential Axle Disconnect Shift Fork

from

$88.99
This 4WD actuator fork directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality to the four-wheel drive system.

Product Features:
  • Upgraded replacement – this differential axle disconnect shift fork features multiple enhancements to the factory design.
  • Durable material – made of forged aluminum to add reliability over original brittle cast aluminum.
  • Stronger components – extended alignment pins prevent future failure from pins breaking
  • Additional support – third contact pad provides greater support around bearing area
See More

ATP – Front Axle Disconnect Gear Pod (Part No.111001)

Front Axle Disconnect Gear Pod

from

$958.99
ATP Front Axle Disconnects are NEW, not remanufactured assemblies. These parts are found on Buick, Chevrolet, GMC, Oldsmobile, and Saab SUV’s. Their purpose is to allow the drive to disengage from four wheel drive or all wheel drive to rear wheel drive.

Product Features:
  • 100% new product content
  • No core
  • No longer available from the GM dealer as a complete assembly
See More

ACDelco – Multi-Purpose Pigtail (Part No.PT2882)

Multi-Purpose Pigtail

from

$69.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – 4WD Switch (Part No.FWC1006)

4WD Switch

from

$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Top-Rated Drivetrains Brands For Your 2005 Isuzu Ascender

Shop for the best-rated brands offering Drivetrains and other products for your 2005 Isuzu Ascenders. Below you’ll find some of our best rated Drivetrains from FELPRO, Moog, and Driveworks, and more. Drivetrains from these brands that fit a 2005 Ascender start at just $6.79 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2005 Isuzu Ascender Drivetrains

When it comes to maintaining or upgrading your 2005 Isuzu Ascender, using quality Drivetrains is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Drivetrains, specifically designed for the 2005 Isuzu Ascender. With over 3 FELPRO brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.99, with an average price of just $23.99. Plus, with over 208 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Differential Cover Gasket
from
$41.99

(4)

Differential Cover Gasket

“Right part, great fit ,flimsy packing”

TRANSFER CASE GASKET SET
from
$19.99

(9)

TRANSFER CASE GASKET SET

“worked great”

Differential Cover Gasket
from
$9.99

(195)

Differential Cover Gasket

“Product easy to put on and easy to work with worked great so far”

Popular Moog 2005 Isuzu Ascender Drivetrains

Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 2005 Isuzu Ascender owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2005 Ascender, Advance Auto Parts carries a full inventory of 6 Moog Drivetrains. Plus you will be keeping your Isuzu in peak condition while saving money because prices on these Moog Drivetrains range from $11.99 to $34.99, plus, with more than 196 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

Greaseable Premium Universal Joint
from
$26.99

(89)

Greaseable Premium Universal Joint

“Great moog u joints”

Universal Joint Strap Kit
from
$11.99
This product is not rated

Universal Joint Strap Kit

“”

Universal Joint Strap Kit
from
$11.99

(35)

Universal Joint Strap Kit

“Fit on my 99 gmc sierra 1500 z71 perfect”

FAQs for 2005 Isuzu Ascender Drivetrains

Which Drivetrains are best-sellers for 2005 Isuzu Ascenders?

Out of 271 Drivetrains that fit 2005 Isuzu Ascenders, the following parts are the top sellers:

What’s the price range for 2005 Isuzu Ascender Drivetrains?

Drivetrain prices for the 2005 Isuzu Ascender start at $2.49 and go up to $1,923.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2005 Isuzu Ascender?

The average price for Drivetrains for the 2005 Isuzu Ascender is $223.84. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Isuzu Ascender model years?

Yes, we currently carry Drivetrains for 5 model years of Isuzu Ascenders between 2003 and 2008. Drivetrains are bought most frequently for the following model years: 2008, 2007, 2006, 2004, and 2003.

What are the cheapest Drivetrains for my 2005 Isuzu Ascender?

The cheapest 2005 Isuzu Ascender Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 2005 Isuzu Ascender?

Out of 3,434 reviews by customers, our 2005 Isuzu Ascender Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2005 Isuzu Ascender and their top-rated products:

What types of Drivetrains do you sell for my 2005 Isuzu Ascender?

Can I get help with 2005 Isuzu Ascender Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Isuzu Drivetrains and more.

What is your return policy for Isuzu Ascender Drivetrains?

Advance Auto Parts keeps returns simple. For new Isuzu Ascender Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.