2005 GMC Yukon Cooling and Climate Controls

Popular 2005 GMC Yukon Cooling and Climate Controls Categories

Essential Cooling and Climate Controls for 2005 GMC Yukons

GM Genuine Parts – Engine Coolant Temperature Sensor (Part No.25186240)

Engine Coolant Temperature Sensor

from

$25.99
ACDelco GM Original Equipment Engine Coolant Temperature Sensors monitor engine temperature, and are GM-recommended replacements for your vehicle’s original components. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. These original equipment engine coolant temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Helps keep engine running at proper temperature
  • Alerts vehicle operator of high engine temperature conditions
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA2375)

Multi-Use Connector

from

$36.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26775)

Cap & Valve A/C System Seal Kit

from

$18.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Carquest Premium – A/C Dark Grey Porous Orifice Tube (Part No.T38644)

A/C Dark Grey Porous Orifice Tube

from

$19.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Felpro – Engine Coolant Thermostat Housing Seal (Part No.35720)

Engine Coolant Thermostat Housing Seal

from

$5.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest Premium – A/C Compressor and Component Kit (Part No.3921K)

A/C Compressor and Component Kit

from

$384.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA2471)

Multi-Use Connector

from

$89.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Factory Air – New Nippondenso 10S17F Clutch Assembly with Coil (Part No.47362)

New Nippondenso 10S17F Clutch Assembly with Coil

from

$180.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
See More

GM Genuine Parts – Heating and Air Conditioning Panel Mode Door Actuator (Part No.15-72505)

Heating and Air Conditioning Panel Mode Door Actuator

from

$130.99
ACDelco GM Original Equipment HVAC Mode Door Actuators are electric motors attached to the HVAC housing that move or actuate the mode doors or flaps, directing the airflow to the desired outlet vents. These original equipment HVAC mode door actuators are GM-recommended replacements for your vehicle’s original components and have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Corrects mode door malfunction caused by a failed actuator
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

GM Genuine Parts – Heating and Air Conditioning Blower Control Module (Part No.15-81773)

Heating and Air Conditioning Blower Control Module

from

$89.99
GM Genuine Parts HVAC Blower Motor Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules are microprocessor computers that modulate HVAC blower motor speed. The blower motor control module receives input from the HVAC control module. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Designed and tested to help ensure quality and durability
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Instrument Panel Air Duct Air Temperature Sensor (Part No.15-5632)

Instrument Panel Air Duct Air Temperature Sensor

from

$11.99
ACDelco GM Original Equipment HVAC Temperature Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: hvac. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Radiator Fan Assembly: Dual, Cost Effective and Reliable (Part No.620-653)

Radiator Fan Assembly: Dual, Cost Effective and Reliable

from

$338.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
  • Complete package – assembly is designed with the same materials and components as the original part
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-101)

HVAC Blend Door Actuator: 1 Piece

from

$49.99
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:
  • Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
  • Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
  • Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
  • Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
See More

Dorman – Pressurized Coolant Reservoir: Black; Clear, Plastic, Original Equipment Replacement (Part No.603-973)

Pressurized Coolant Reservoir: Black; Clear, Plastic, Original Equipment Replacement

from

$64.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part
  • Ideal solution – engineered for a seamless installation
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Carquest Premium – Universal Fan Clutch – Heavy-Duty Truck Fan Drive (Part No.216013)

Universal Fan Clutch - Heavy-Duty Truck Fan Drive

from

$173.99
Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. The fan clutch is the component of the cooling system that varies the fan speed to meet the cooling needs of the engine. The fan clutch provides high airflow volume and, by only operating the fan as needed, promotes good fuel economy. CARQUEST fan clutches are designed to meet OE performance specifications.

Product Features:
  • CARQUEST Premium Fan Clutch
  • Heavy-duty truck fan drives
  • Designed, tested and built by application
  • OE performance, fit and appearance
See More

KAI – A/C Condenser (Part No.CND4283)

A/C Condenser

from

$121.99
New Platinum Pro A/C Condenser, 5.3/6.2 Liter Engines, With Built-In Trans Oil Cooler

Product Features:
  • 5.3/6.2 Liter Engines, With Built-In Trans Oil Cooler, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Discharge and Suction Line Hose Assembly (Part No.T56189)

A/C Discharge and Suction Line Hose Assembly

from

$83.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

GM Genuine Parts – Engine Coolant Thermostat Water Inlet Assembly (Part No.15-10412)

Engine Coolant Thermostat Water Inlet Assembly

from

$72.99
GM Genuine Parts Engine Coolant Thermostat / Water Inlet Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These engine coolant thermostat / water inlet assemblies contain the engine thermostat and water inlet housing. The engine coolant thermostat controls the flow of coolant through the radiator; enabling the engine to reach and maintain its normal operating temperature. The water inlet housing connects the radiator hoses to the thermostat. For certain applications, the water inlet contains threaded holes or ports for sensors and switches. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Provides a durable leak-resistant seal
  • Repairs leaking thermostat housings
  • Corrects engine overheating caused by failed thermostat
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

KAI – Radiator (Part No.RAD13029)

Radiator

from

$232.99
New Platinum Pro Radiator, 34 Inch Core With Engine And Transmission Oil Coolers

Product Features:
  • 34 Inch Core With Engine Oil Cooler And TOC, Without Heavy Duty Cooling, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Radiator Cap Not Included
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Heater Core (Part No.910464)

Heater Core

from

$73.99
Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
  • Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Designed to keep your A/C system in top shape and built to provide long-lasting service
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Dorman – 30 Amp 12 Volt 5 Pin Universal Relay (Part No.88069)

30 Amp 12 Volt 5 Pin Universal Relay

from

$16.99
Accessory Power Relays use a small current to activate an internal switch that allows a larger current to flow to a particular load. All our Accessory Power Relays are constructed of high quality materials for durability.

Product Features:
  • No special tools required for installation
  • Easy to install
  • Wiring diagram included
  • Manufactured to strict engineering quality standards
See More

National – Multi-Purpose Bearing (Part No.907257)

Multi-Purpose Bearing

from

$48.99
Product Features:
  • BUILT TO LAST: Advanced heat treatment process for strength
  • PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
  • RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Carquest Premium – Coolant Housing/Water Outlet: With Gasket (Part No.CH5169)

Coolant Housing/Water Outlet: With Gasket

from

$14.99
Carquest Premium Coolant Housings are manufactured with OEM quality materials and safety standards by an OE Supplier. This housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. The construction of this housing is improved over the OE design to fix and update any issues that the OE design may have had.

Product Features:


    Product Features:
    • Easy, one step fit and installation
    • No special tools required
    • Meets or exceeds all OEM standards
See More

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Thermostatic Fan Control - Adjustable

from

$69.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Adjustable thermostatic fan control
  • 160 Deg. F – 210 Deg. F thread-in probe
  • For use with Imperial electric fans
  • Thread-in probe for installation in water jacket or radiator
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Brass construction for accurate temperature sensing
  • Zinc coated terminal to resist corrosion
  • Vehicle specific applications
See More

Carquest Premium – Multi-Purpose Relay (Part No.RAA1799)

Multi-Purpose Relay

from

$29.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Dorman – Position Radiator Bracket (Part No.523-057)

Position Radiator Bracket

from

$216.99
This radiator mount bracket is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Water Pump Mounting Hardware Kit (Part No.902-807)

Water Pump Mounting Hardware Kit

from

$16.49
This engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original hardware that is missing or damaged
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Factory Air – Standard Relay (Part No.35927)

Standard Relay

from

$12.05
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Precision engineered
  • OE style molded connectors
  • Quality contacts ensure proper conductivity
  • Vehicle specific applications
See More

Upgrade your 2005 GMC Yukon with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2005 GMC Yukon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Yukon functioning at its best. At Advance Auto Parts, we offer a wide selection of 185 Cooling and Climate Controls for the 2005 GMC Yukon, designed to meet your needs without breaking the bank. From Blend Door replacements to Blower Motor and Related Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2005 GMC Yukon at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.49 to $519.99, with an average price of $91.34. Our 185 Cooling and Climate Controls in stock come from 21 trusted brands, so you’re sure to find the right part for your 2005 GMC Yukon without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 GMC Yukon, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like GM Genuine, Carquest Premium, Dorman, and more. GM Genuine Cooling and Climate Controls start at just $7.49 and boast an impressive 4.5 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Cooling and Climate Controls available starting at $11.99, and at an average 4.4 stars rating. With 15,468 customer reviews and counting, our 2005 GMC Yukon Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 GMC Yukon is always ready to roll. We’re committed to providing you with everything you need to keep your Yukon in top shape, all in one place. Start shopping confidently below for your 2005 GMC Yukon!

Best-Selling Blend Doors for 2005 GMC Yukons

Enhance the driving experience in your GMC with 10 quality Blend Door components, starting at $49.99.

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-112)

HVAC Blend Door Actuator: 1 Piece

from

$49.99
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:
  • Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
  • Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
  • Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
  • Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
See More

GM Genuine Parts – Heating and Air Conditioning Panel Mode Door Actuator (Part No.15-73952)

Heating and Air Conditioning Panel Mode Door Actuator

from

$83.99
ACDelco GM Original Equipment HVAC Mode Door Actuators are electric motors attached to the HVAC housing that move or actuate the mode doors or flaps, directing the airflow to the desired outlet vents. These original equipment HVAC mode door actuators are GM-recommended replacements for your vehicle’s original components and have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Corrects mode door malfunction caused by a failed actuator
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

GM Genuine Parts – HVAC Blend Door Actuator: 1 Piece (Part No.15-72971)

HVAC Blend Door Actuator: 1 Piece

from

$255.99
ACDelco GM Original Equipment HVAC Air Valve Actuator is a GM-recommended replacement component for one or more of the following vehicle systems: hvac. This original equipment actuator will provide the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-106)

HVAC Blend Door Actuator: 1 Piece

from

$129.99
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:
  • Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
  • Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
  • Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
  • Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
See More

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-100)

HVAC Blend Door Actuator: 1 Piece

from

$49.99
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:
  • Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
  • Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
  • Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
  • Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
See More

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-120)

HVAC Blend Door Actuator: 1 Piece

from

$52.99
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:
  • Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
  • Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
  • Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
  • Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
See More

GM Genuine Parts – Heating and Air Conditioning Air Inlet Door Actuator (Part No.15-73599)

Heating and Air Conditioning Air Inlet Door Actuator

from

$68.99
ACDelco GM Original Equipment HVAC Air Inlet Door Actuators are electric motors attached to the HVAC housing that open or close the air inlet door, allowing the driver to select fresh air or recirculate modes. They are GM-recommended replacements for your vehicle’s original components. These original equipment air inlet door actuators have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Restore air inlet door operation caused by worn actuator
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-111)

HVAC Blend Door Actuator: 1 Piece

from

$115.99
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:
  • Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
  • Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
  • Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
  • Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
See More

Dorman – HD Solutions – HVAC Blend Door Actuator: 1 Piece (Part No.604-5155)

HVAC Blend Door Actuator: 1 Piece

from

$58.99
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:
  • Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
  • Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
  • Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
  • Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
See More

GM Genuine Parts – Temperature Valve Actuator (Part No.15-71845)

Temperature Valve Actuator

from

$86.99
ACDelco GM Original Equipment HVAC Air Valve Actuator is a GM-recommended replacement component for one or more of the following vehicle systems: hvac. This original equipment actuator will provide the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Most Popular 2005 GMC Yukon Blower Motor and Related Products

Customize your GMC with 16 Blower Motor and Related Products products like Blower Motors, Blower Motor Resistors, and Blower Relays, all priced under $167.99.

GM Genuine Parts – Heating and Air Conditioning Blower Control Module (Part No.15-81773)

Heating and Air Conditioning Blower Control Module

from

$89.99
GM Genuine Parts HVAC Blower Motor Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules are microprocessor computers that modulate HVAC blower motor speed. The blower motor control module receives input from the HVAC control module. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Designed and tested to help ensure quality and durability
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Blower Motor: with Wheel (Part No.75748)

Blower Motor: with Wheel

from

$103.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM.Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Carquest Premium – Blower Motor: with Wheel (Part No.35143)

Blower Motor: with Wheel

from

$109.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Dorman – Blower Motor Speed Resistor (Part No.973-009)

Blower Motor Speed Resistor

from

$60.99
Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:
  • Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
  • Restores performance – fixes a fan that’s only operating on one speed or not working at all
  • Thoroughly tested – examined and validated to perform safely and effectively
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Carquest Premium – Blower Motor: without Wheel (Part No.35120)

Blower Motor: without Wheel

from

$89.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1004)

HVAC Blower Motor Resistor

from

$91.99
Blower motor resistor fail? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment.

Product Features:
  • Restores Functionality – Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Carquest – HVAC Blower Motor Resistor (Part No.13C1001)

HVAC Blower Motor Resistor

from

$46.99
Carquest blower motor resistors are designed to meet original equipment (O.E.) fit, form and function and are built to ensure reliable performance at a great price. Each blower motor resistor is 100% tested to ensure proper performance and a trouble-free installation. Carquest blower motor resistors are a cost-effective solution for your engine management repair. Carquest blower motor resistors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • 100% tested for proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1013)

HVAC Blower Motor Resistor

from

$56.99
Blower motor resistor fail? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment.

Product Features:
  • Restores Functionality – Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

GM Genuine Parts – Heating and Air Conditioning Blower Motor with Wheel (Part No.15-81647)

Heating and Air Conditioning Blower Motor with Wheel

from

$167.99
GM Genuine Parts HVAC Blower Motor and Wheels are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These HVAC blower motor and wheels are electrical motor and fan assemblies that push air through your vehicle’s heating and air conditioning system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Permanently lubricated, self-aligning bearings designed for long life and dependable performance
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Multi-Use Connector (Part No.PTC1006)

Multi-Use Connector

from

$43.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RAC1536)

HVAC Blower Motor Resistor

from

$123.99
Carquest Premium blower motor resistors are designed to restore proper functionality in the HVAC system while meeting or exceeding original equipment (O.E.) specifications. Carquest Premium blower motor resistors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium blower motor resistors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium blower motor resistors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured with high quality materials, industry-leading electronic components and strict quality controls
  • Extensive design validation testing and 100% end-of-line tested
  • Gaskets or seals are included if required
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

GM Genuine Parts – Heating and Air Conditioning Blower Motor Resistor (Part No.22807123)

Heating and Air Conditioning Blower Motor Resistor

from

$67.99
GM Genuine Parts HVAC Blower Motor Resistors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Multi-Purpose Relay (Part No.15-8961)

Multi-Purpose Relay

from

$95.99
GM Genuine Parts Auxiliary Engine Cooling Fan Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – HVAC Blower Motor Resistor (Part No.973-896)

HVAC Blower Motor Resistor

from

$102.99
Product Features:
  • Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
  • Restores performance – fixes a fan that’s only operating on one speed or not working at all
  • Thoroughly tested – examined and validated to perform safely and effectively
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Carquest Premium – Multi-Use Connector (Part No.PTA2375)

Multi-Use Connector

from

$36.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Autotecnica – Blower Motor Resistor (Part No.GM0616709)

Blower Motor Resistor

from

$19.99
Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive “Genuine” components.
See More

Top Picks for 2005 GMC Yukon Air Conditioning Parts

Upgrade GMC Yukons with top-quality Air Conditioning Parts parts, including 95 OEM and aftermarket selections for your 2005 model.

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26824)

O-Ring & Gasket A/C System Seal Kit

from

$23.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R134a and R12 refrigerants
  • Application specific
  • SUV and rear air applications
  • All the seals needed to complete the job
  • Compatible with both R134a and R12 refrigerants
  • Application specific
  • SUV and rear air applications
See More

GM Genuine Parts – Air Conditioning Service Valve (Part No.15-5438)

Air Conditioning Service Valve

from

$7.49
GM Genuine Parts A/C Service Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These spring-loaded valves allow service access to the A/C system. The service valves allow the service technician to evacuate and recharge the refrigerant in the A/C system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Repairs leaking A/C system
  • Restores A/C function
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Multi-Purpose Relay (Part No.D1741C)

Multi-Purpose Relay

from

$28.99
ACDelco Professional Temperature Control Relay is a high quality aftermarket replacement component for one or more of the following vehicle systems: HVAC. This premium aftermarket relay is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

GM Genuine Parts – Air Conditioning Orifice Tube (Part No.15-5378)

Air Conditioning Orifice Tube

from

$10.49
GM Genuine Parts A/C Orifice Tubes are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These tubes, which separate the high and low pressure sides of the air conditioning system, control the flow of low pressure liquid refrigerant into the evaporator. The orifice tube is essentially a calibrated restriction located at the inlet to the evaporator. This causes the necessary pressure drop to allow the liquid refrigerant to evaporate within the evaporator and absorb heat. Since the orifice tube is fixed, the system is regulated by either cycling the compressor clutch or by a variable displacement compressor. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Restores A/C performance due to restricted orifice tubes
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Air Conditioning System Valve Core (Part No.15-1119)

Air Conditioning System Valve Core

from

$14.99
GM Genuine Parts A/C System Valve Cores are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These A/C system valve cores are components of the A/C service valve through which your vehicle’s refrigerant can be accessed and serviced. The valve core is a spring-loaded poppet valve that is opened when the service technician connects the A/C service machine hose couplers. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Repair leaking A/C system, restore A/C function
  • Helps restore A/C Function
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – A/C Accumulator (Part No.T83221)

A/C Accumulator

from

$74.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54873)

A/C Plate and Fin Evaporator

from

$173.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.20055)

Compressor Mounted High Cut-Out Pressure Switch

from

$34.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Improved 2 terminal design replacing older 1 terminal switch
See More

GM Genuine Parts – Air Conditioning Clutch Cycling Switch (Part No.15-50156)

Air Conditioning Clutch Cycling Switch

from

$59.99
GM Genuine Parts A/C Clutch Cycle Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These A/C clutch cycle switches are component sensors that monitor the evaporator temperature and pressure. The switch turns the compressor clutch field coil off and on. When the pressure and temperature are too low, the compressor is switched off. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Restores A/C compressor clutch function
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – A/C Service Valve Cap (Part No.902-025)

A/C Service Valve Cap

from

$11.99
This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35970)

Compressor Mounted Low Cut-Out Pressure Switch

from

$34.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Improved 2 terminal design replacing older 1 terminal switch
See More

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.20058)

Compressor Mounted High Cut-Out Pressure Switch

from

$29.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Improved 2 terminal design replacing older 1 terminal switch
See More

Dorman – Pigtail -Evap. Canister Vent Valve Solenoid, Red, 2-way with Leads (Part No.645-631)

Pigtail -Evap. Canister Vent Valve Solenoid, Red, 2-way with Leads

from

$41.99
Make better electrical repairs and accessory installations with a Dorman pigtail connector. Designed for a clean appearance when installed, Dorman connectors are ideal for neatly securing wiring jobs in automotive, commercial, industrial and household applications. Our pigtails are constructed from quality materials for long service life and resistance to the elements, and offer a range of features including locking tabs, weatherproof seals and more, where applicable. Check the product details to choose the best product for your electrical wiring needs.

Product Features:
  • Ideal solution – this pigtail connector is designed to neatly connect to an idle control valve on specified vehicles
  • Ensure fit – check the product details to choose the best product for your needs
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – A/C Black Orifice Tube (Part No.T38638)

A/C Black Orifice Tube

from

$5.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • Color coded
See More

Factory Air – System Mounted Cycling Pressure Switch (Part No.37308)

System Mounted Cycling Pressure Switch

from

$19.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
  • Vehicle specific applications
See More

Carquest Premium – A/C Accumulator (Part No.T83208)

A/C Accumulator

from

$59.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Dark Grey Porous Orifice Tube (Part No.T38644)

A/C Dark Grey Porous Orifice Tube

from

$19.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.35974)

Compressor Mounted High Cut-Out Pressure Switch

from

$36.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Improved 2 terminal design replacing older 1 terminal switch
See More

Factory Air – Standard Relay (Part No.36008)

Standard Relay

from

$27.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Precision engineered
  • OE style molded connectors
  • Quality contacts ensure proper conductivity
  • Vehicle specific applications
See More

Carquest Standard – Remanufactured Compressor with Clutch (Part No.DW77377)

Remanufactured Compressor with Clutch

from

$309.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
  • Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
  • Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
  • Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
  • Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
  • Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26775)

Cap & Valve A/C System Seal Kit

from

$18.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Carquest Premium – A/C Condenser (Part No.2317)

A/C Condenser

from

$183.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.
See More

DENSO – A/C Compressor with Clutch – New (Part No.471-0315)

A/C Compressor with Clutch - New

from

$332.99
As one of the world’s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56421)

A/C Discharge Line Hose Assembly

from

$77.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

In-Demand Engine Cooling Parts for 2005 GMC Yukons

Select from 50 premium Engine Cooling Parts parts for your 2005 GMC Yukon, with prices ranging from $5.49 to $336.39.

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432298)

Radiator: With Transmission Oil Cooler

from

$311.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4514)

Engine Coolant Temperature Sensor

from

$38.99
ACDelco Professional Engine Coolant Temperature Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Adjustable Thermostatic Fan Control

from

$23.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Economy adjustable thermostatic fan control
  • Economy Model; 32-248 Deg. F
  • For use with Imperial electric fans
  • Probe installs into radiator fins
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Brass construction for accurate temperature sensing
  • Zinc coated terminal to resist corrosion
  • Vehicle specific applications
See More

Felpro – Engine Water Pump Gasket Kit (Part No.ES 73010)

Engine Water Pump Gasket Kit

from

$7.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.82597)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$17.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Delphi – Engine Coolant Temperature Sensor (Part No.TS10076)

Engine Coolant Temperature Sensor

from

$40.99
Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T7052)

Engine Water Pump: New, Gasket/Seals Included

from

$151.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Carquest Premium – Standard Thermostat: With Seal, 187 Degrees (Part No.14948)

Standard Thermostat: With Seal, 187 Degrees

from

$17.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Driveworks Water Pumps – Engine Water Pump (Part No.58-562)

Engine Water Pump

from

$104.99
This replacement engine water pump is leak and flow tested. Gaskets and seals are included where applicable.

Product Features:
  • This pump is used on accessory belt driven applications
  • Used mostly on models equipped with a fan clutch
  • It is highly recommended that the fan clutch be replaced with the water pump
  • All gaskets or seals necessary for installation are supplied with pump
  • Durable housing features precisely machined mounting surfaces for proper sealing
See More

Felpro – Engine Water Pump Gasket (Part No.35635)

Engine Water Pump Gasket

from

$7.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – Radiator: With Engine and Transmission Oil Coolers (Part No.432306)

Radiator: With Engine and Transmission Oil Coolers

from

$327.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Carquest Premium – Radiator Cap: 15 PSI (Part No.10248)

Radiator Cap: 15 PSI

from

$15.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Engine Cooling Fan Clutch: Reverse Rotation Severe Duty Thermal Clutch (Part No.215158)

Engine Cooling Fan Clutch: Reverse Rotation Severe Duty Thermal Clutch

from

$95.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432295)

Radiator: With Transmission Oil Cooler

from

$226.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Dorman – Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement (Part No.603-102)

Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement

from

$75.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part
  • Ideal solution – engineered for a seamless installation
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Dorman – Help – Radiator Drain Cocks (Part No.61136)

Radiator Drain Cocks

from

$5.49
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

Carquest – A/C Compressor Connector (Part No.PT770)

A/C Compressor Connector

from

$16.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
  • Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
  • All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
  • Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Reverse Rotation Thermal Fan Clutch – Heavy Duty 7" (Part No.215107)

Reverse Rotation Thermal Fan Clutch - Heavy Duty 7"

from

$92.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Felpro – Engine Coolant Thermostat Housing Seal (Part No.35720)

Engine Coolant Thermostat Housing Seal

from

$5.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$65.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Imperial – Electric Fan, 14" Diameter (Part No.226114)

Electric Fan, 14" Diameter

from

$99.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$46.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Preset thermostatic fan control
  • 185 Deg. F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Brass construction for accurate temperature sensing
  • Zinc coated terminal to resist corrosion
  • Vehicle specific applications
See More

Motorad – Engine Coolant Thermostat Housing Assembly Thermostat: With Inlet, With Seal, 187 Degrees (Part No.524KT)

Engine Coolant Thermostat Housing Assembly Thermostat: With Inlet, With Seal, 187 Degrees

from

$58.99
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Thermostatic Fan Control - Adjustable

from

$69.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Adjustable thermostatic fan control
  • 160 Deg. F – 210 Deg. F thread-in probe
  • For use with Imperial electric fans
  • Thread-in probe for installation in water jacket or radiator
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Brass construction for accurate temperature sensing
  • Zinc coated terminal to resist corrosion
  • Vehicle specific applications
See More

Most Sold 2005 GMC Yukon Heating Parts

Explore our best-selling GMC parts for the 2005 Yukon among 6 OEM and aftermarket options starting from $44.99.

Factory Air – System Mounted Pressure Transducer (Part No.20915)

System Mounted Pressure Transducer

from

$44.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

GM Genuine Parts – Heater Core (Part No.15-62960)

Heater Core

from

$213.99
GM Genuine Parts HVAC Heater Cores are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These HVAC heater cores are small radiators, located in the plenum behind the dashboard. Engine coolant flows through the heater core in order to heat the air in the passenger compartment. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Long-life alloys provide corrosion resistance
  • High-strength brazed joints ensure durability
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Heater Core (Part No.910463)

Heater Core

from

$135.99
Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
  • Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Designed to keep your A/C system in top shape and built to provide long-lasting service
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Carquest Premium – Heater Core (Part No.394204)

Heater Core

from

$143.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Carquest Premium – Heater Core (Part No.399294)

Heater Core

from

$101.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Carquest Premium – Heater Core (Part No.910464)

Heater Core

from

$73.99
Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
  • Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Designed to keep your A/C system in top shape and built to provide long-lasting service
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Top-Rated Cooling and Climate Controls Brands For Your 2005 GMC Yukon

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2005 GMC Yukons. Below you’ll find some of our best rated Cooling and Climate Controls from GM Genuine, Carquest Premium, and Dorman, and more. Cooling and Climate Controls from these brands that fit a 2005 Yukon start at just $7.49 and are rated as high as 4.5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular GM Genuine 2005 GMC Yukon Cooling and Climate Controls

When it comes to maintaining or upgrading your 2005 GMC Yukon, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. GM Genuine ticks all of those boxes. We offer a wide selection of GM Genuine Cooling and Climate Controls, specifically designed for the 2005 GMC Yukon. With over 3 GM Genuine brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.49, with an average price of just $33.99. Plus, with over 12 customer reviews and an average rating of 4.5 stars, you can trust that our GM Genuine Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Heating and Air Conditioning Panel Mode Door Actuator
from $83.99
(1)
Heating and Air Conditioning Panel Mode Door Actuator
“I replaced this two days ago and so far it works perfectly. One tip I would give is to plug it in before installing and set the mode to feet, unplug i”
Air Conditioning Orifice Tube
from $10.49
(4)
Air Conditioning Orifice Tube
“fixed the problem”
Air Conditioning Service Valve
from $7.49
(7)
Air Conditioning Service Valve
“Thanks”

Popular Carquest Premium 2005 GMC Yukon Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2005 GMC Yukon owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2005 Yukon, Advance Auto Parts carries a full inventory of 3 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your GMC in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $74.99 to $311.99, plus, with more than 100 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.
A/C Plate and Fin Evaporator
from $173.99
(1)
A/C Plate and Fin Evaporator
“Easy to install once the HVAC box is removed. Finally COLD air. Colder that the original factory air. I had a quote of $1300 but replaced the evaporat”
A/C Accumulator
from $74.99
(4)
A/C Accumulator
“Super easy to install. Watched a video on youtube and was done in half an hour. Finally COLD air and I saved a ton ordering it online and then picking”
Radiator: With Transmission Oil Cooler
from $311.99
(95)
Radiator: With Transmission Oil Cooler
“N/A”

FAQs for 2005 GMC Yukon Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2005 GMC Yukons?

Out of 185 Cooling and Climate Controls that fit 2005 GMC Yukons, the following parts are the top sellers:

What’s the price range for 2005 GMC Yukon Cooling and Climate Controls?

Cooling and Climate Control prices for the 2005 GMC Yukon start at $1.49 and go up to $519.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2005 GMC Yukon?

The average price for Cooling and Climate Controls for the 2005 GMC Yukon is $91.34. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other GMC Yukon model years?

Yes, we currently carry Cooling and Climate Controls for 33 model years of GMC Yukons between 1992 and 2026. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Cooling and Climate Controls for my 2005 GMC Yukon?

The cheapest 2005 GMC Yukon Cooling and Climate Controls we carry in stock are:

What are the top-rated Cooling and Climate Controls that fit the 2005 GMC Yukon?

Out of 15,468 reviews by customers, our 2005 GMC Yukon Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2005 GMC Yukon and their top-rated products:

What types of Cooling and Climate Controls do you sell for my 2005 GMC Yukon?

Can I get help with 2005 GMC Yukon Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Cooling and Climate Controls and more.

What is your return policy for GMC Yukon Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new GMC Yukon Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.