2005 GMC Sierra 1500 Performance and Racing Products

Essential Performance and Racing Products for 2005 GMC Sierra 1500s

B & M – Torque Converter, Holeshot 2000 (Part No.70417)

Torque Converter, Holeshot 2000

from

$544.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

aFe POWER – Power Module (Part No.77-84013)

Power Module

from

$655.99
Power Module

Dynomax – Cat-Back Exhaust (Part No.19455)

Cat-Back Exhaust

from

$311.99
DynoMax Performance Exhaust is a leading performance exhaust brand built on over 25 years of market leadership. Each and every DynoMax product is backed by engineers who know what you want and expect out of a performance exhaust product… and who exceed your expectations every time.
See More

Hays – Flexplate GM Ls (Part No.10-030)

Flexplate GM Ls

from

$179.99
Flexplate GM Ls

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.63-3082)

Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter

from

$349.99
K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your Silverado / Tahoe / Escalade / Suburban and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system.
  • IMPROVED ENGINE SOUND – HEAR THE GROWL: K&N¿s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • IMPROVED ENGINE SOUND – HEAR THE GROWL: K&N┐s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
  • PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty.
  • HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&N¿s red filter oil to absorb dirt & dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100k miles under normal highway conditions.
  • HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&N┐s red filter oil to absorb dirt & dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100k miles under normal highway conditions.
  • EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
  • MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.
See More

Dynomax – Hardware (Part No.36154)

Hardware

from

$37.49
Complete your exhaust repair with DynoMax exhaust system hangers. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax exhaust system hangers are manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • OE DESIGN — Designed with OE-style features (where applicable) for easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS¿–¿Made from quality steel for durability and long life
  • PREMIUM MATERIALS┐–┐Made from quality steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax« accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – 52465 Exhaust Tail Pipe (Part No.52465)

52465 Exhaust Tail Pipe

from

$58.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – 51075 Exhaust Pipe (Part No.51075)

51075 Exhaust Pipe

from

$18.79
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Spectre – Spectre Replacement Air Filter (Part No.HPR8755)

Spectre Replacement Air Filter

from

$41.99
This Spectre OEM replacement air filter is an easy to install performance option for the stock panel air filter in multiple Chevy and GM truck applications. With its HPR (High Performance Replacement) synthetic air filter media, this panel air filter has been designed to provide more horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock air box, this air filter is easy to install and has been engineered with a sealing edge specific to your air box to insure a proper seal for great engine protection.

Product Features:
  • HPR OE Replacement Air Filter
  • High flow replacement filter designed to fit perfectly in your stock air box
  • Engineered for increased flow and greater performance
  • Fits multiple Chevy and GM truck applications
  • Factory pre-oiled and ready to use
  • Easy to install with no special tools or skills required
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2129)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$74.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
  • REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
  • EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
See More

Richmond Gear – RngPnn (Part No.49-0041-1)

RngPnn

from

$342.99
RngPnn

Richmond Gear – Differential Ring And Pinion (Part No.49-0034-1)

Differential Ring And Pinion

from

$342.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)

Automatic Shifter, Quicksilver 4 Speed

from

$439.99
The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:
  • Universal Floor Mount Application
  • Base Trimmed For Custom Fit
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
See More

B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)

Automatic Shifter, Hammer Shifter, Universal

from

$339.99
The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s

Product Features:
  • Ratchet Action Shifter
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
  • Reverse Lockout Feature
See More

Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)

50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics

from

$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.

Product Features:
  • HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
  • MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
  • CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
  • Reads and Erases Diagnostic Trouble Codes
  • Display Over 15 Vehicle Parameters
  • Installation Is Easy-10-20 Minutes
  • Free Internet Updates And Upgrades
  • 30 Day Money Back Guarantee
See More

Hypertech – Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (Part No.3300)

Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size

from

$239.99
If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Product Features:
  • Speedometer correction for multiple tire sizes
  • Return back to factory settings
  • Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
  • Internet updateable
  • Product might not be available in all states due to local laws.
See More

Bully Dog – Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (Part No.40417)

Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device

from

$469.99
This Bully Dog GT Platinum tuner is four products in one: a vehicle engine tuner, monitor, gauge, and diagnostic device.ÿ

Product Features:
  • Dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy, and providing a comprehensive set of monitoring features and diagnostic functions.
  • Bully Dog GT Platinum tuners are incomparable to other tuning products because they have the largest feature set and the widest range of vehicle applications available.
  • Product might not be available in all states due to local laws.
See More

Dynomax – Exhaust Intermediate Pipe (Part No.54720)

Exhaust Intermediate Pipe

from

$89.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – Exhaust Intermediate Pipe (Part No.55536)

Exhaust Intermediate Pipe

from

$129.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2141R)

Leaf Spring Bushing Set

from

$116.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)

Shift Improver Kit For 93-02 4L60E

from

$73.99
The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.

Product Features:
  • Provides Crisp Shifts
  • On Any Stock Automatic Transmission
  • Eliminates Soft/Sluggish Shift
  • Eliminates Shift Overlap
  • Eliminate Clutch and Band Wear
  • Improves Transmission Life
  • Transmission Removal Not Required
See More

Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval (Part No.17519)

Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval

from

$118.99
DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • Stainless steel construction for lifelong protection
  • Polished finish for a show quality shine
  • Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
See More

Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval (Part No.17220)

Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval

from

$102.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • Stainless steel construction for lifelong protection
  • 100% welded design for maximum durability
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
See More

Flowmaster Inc. – 50 Big Block Muffler – 3.00 Dual In / 3.50 Offset Out – Mild Sound (Part No.530513)

50 Big Block Muffler - 3.00 Dual In / 3.50 Offset Out - Mild Sound

from

$278.99
The 50 Series Big Block muffler is made for more than just big cubic inch engine applications. Its large case size with internal tuning chamber provides mileage and power gains along with maximum sound control for a quiet interior tone, even under heavy loads. Well suited to heavy duty vehicles such as full size trucks, SUV’s, RVs, and tow vehicles. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

aFe POWER – Momentum GT Cold Air Intake: Gain up to 18 Horsepower! Dry Air Filter For Easy Maintenance (Part No.50-70042D)

Momentum GT Cold Air Intake: Gain up to 18 Horsepower! Dry Air Filter For Easy Maintenance

from

$498.99
Large Three Layer Performance Air Filter:Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.

Product Features:
  • Dyno-Proven Gains up to +18 HP & +23 Lbs. x Ft. TQ
  • Outflows Factory Intake by 10%
  • Measured Flow: 275 CFM @ 7″ H2O
  • Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
See More

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9026)

Cold Air Intake Kit Engineered to Add Horsepower & Torque

from

$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • WILL NOT VOID VEHICLE WARRANTY
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 18 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12332-GR)

Magnum FORCE Cold Air Intake: Gain up to 18 Horsepower! Oiled Air Filter For Maximum Airflow

from

$498.99
Magnum FORCE Stage-2 Cold Air Intake Systems provide an open-element design that showcase large air filters and produce a bolder engine tone than other intake designs. The open accessible design makes monitoring and servicing the air filter a breeze, while adding an aggressive style to your engine bay. The PRO 5R Air Filter provides maximum air flow resulting in the highest horsepower and torque gains, while maintaining an excellent airflow and 98.6% filter efficiency best suited for street and track use.

Product Features:
  • Powder-Coated One Piece Heat-shield utilizes stock mounting locations
  • 3-angle filter adaptor increases air velocity after the air filter for improved performance and throttle response
  • Mandrel-Bent Powder-coated aluminum intake tube improves performance
  • Washable and Reusable Pro 5R Air Filter for Maximum Performance
See More

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.57-3082)

Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter

from

$349.99
The K&N 57-3082 FIPK air intake system replaces the restrictive factory air filter and air intake housing in specific Chevy Suburban, Tahoe, Silverado 1500 and GMC Yukon/Denali/XL as well as Cadillac Escalade and Escalade ESV models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hoses. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Upgrade your 2005 GMC Sierra 1500 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 2005 GMC Sierra 1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your Sierra 1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Performance and Racing Products for the 2005 GMC Sierra 1500, designed to meet your needs without breaking the bank. From Performance Air Intake Kit replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2005 GMC Sierra 1500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $32.99 to $938.99, with an average price of $311.33. Our 41 Performance and Racing Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 2005 GMC Sierra 1500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 GMC Sierra 1500, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Spectre, Dynomax, and more. K&N Performance and Racing Products start at just $74.99 and boast an impressive 5 stars average rating from customers. Spectre and Dynomax also bring quality to the table, with Performance and Racing Products available starting at $32.99, and at an average 4 stars rating. With 6,190 customer reviews and counting, our 2005 GMC Sierra 1500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 GMC Sierra 1500 is always ready to roll. We’re committed to providing you with everything you need to keep your Sierra 1500 in top shape, all in one place. Start shopping confidently below for your 2005 GMC Sierra 1500!

Best-Selling Performance Air Intake Kits for 2005 GMC Sierra 1500s

Enhance the driving experience in your GMC with 7 quality Performance Air Intake Kit components, starting at $199.99.

K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.57-3050)

Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.77-3050KP)

Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter

from

$449.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9900)

Cold Air Intake Kit Engineered to Add Horsepower & Torque

from

$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • WILL NOT VOID VEHICLE WARRANTY
See More

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.57-3038)

Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9900K)

Cold Air Intake Kit Engineered to Add Horsepower & Torque

from

$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • WILL NOT VOID VEHICLE WARRANTY
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 18 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-10092)

Magnum FORCE Cold Air Intake: Gain up to 18 Horsepower! Oiled Air Filter For Maximum Airflow

from

$428.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses Pro 5R Filter For Maximum Air Flow
  • Rotomolded Plastic Tube For Maximum Air Flow
  • 77% cfm Flow Gain
  • Improved Throttle Response
See More

Flowmaster Inc. – Cold Air Intake – Delta Force – 05-07 GM Trucks (Part No.615118)

Cold Air Intake - Delta Force - 05-07 GM Trucks

from

$352.99
Cold Air Intake – Delta Force – 05-07 GM Trucks

Most Popular 2005 GMC Sierra 1500 Performance Engines

Customize your GMC with 1 Performance Engines products like Performance Torque Converters, all priced under $709.99.

B & M – Holeshot 2400 (Part No.70441)

Holeshot 2400

from

$709.99
Holeshot 2400 for GM 1998 to 2002 4L60E Camaro and Firebird with an LS1 engine Application: GM 1998 to 2002 4L60E Camaro and Firebird with LS1 A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benef

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

Top Picks for 2005 GMC Sierra 1500 Performance Exhaust Products

Upgrade GMC Sierra 1500s with top-quality Performance Exhaust Products parts, including 13 OEM and aftermarket selections for your 2005 model.

Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval (Part No.17220)

Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval

from

$102.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • Stainless steel construction for lifelong protection
  • 100% welded design for maximum durability
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
See More

Dynomax – Dual – 3in/2.5in Cat-Back Exhaust System – Ultra Flo Welded Muffler: Stainless Steel (Part No.39310)

Dual - 3in/2.5in Cat-Back Exhaust System - Ultra Flo Welded Muffler: Stainless Steel

from

$459.99
Give your Chevrolet Silverado or GMC Sierra 1500/2500’s exhaust system an upgrade with a DynoMax Ultra Flo welded 3-in./2.5-in. dual cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • COMPATIBILITY — Designed for 1999-2007 Chevrolet Silverado/GMC Sierra 1500 and 1999-2000 Chevrolet Silverado/GMC Sierra 2500; 143.5-in. wheelbase; see product information for compatibility and engine specs
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tips, hangers, clamps, bolts and cable ties
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
  • IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,900 SCFM
  • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • ENGINEERED TO LAST — Stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
  • ENGINEERED TO LAST — Stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
  • NOTES — Exits in rear on either side of license plate; under 8,600-lb. GVWR with dual exhaust; 3-in. outlet double wall, buffed and polished stainless-steel slant cut tips
See More

Dynomax – Super Turbo Muffler Universal Fit Aluminized Steel 13" L, 3" In, 2.5" Out, Oval (Part No.17674)

Super Turbo Muffler Universal Fit Aluminized Steel 13" L, 3" In, 2.5" Out, Oval

from

$89.99
DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone.

Product Features:
  • Large internal flow tubes improve exhaust flow and reduce backpressure
  • Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
  • Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
  • Dyno proven to flow up to 700 SCFM
See More

Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval (Part No.17228)

Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval

from

$156.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • Stainless steel construction for lifelong protection
  • 100% welded design for maximum durability
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
See More

Dynomax – Exhaust Pipe (Part No.55520)

Exhaust Pipe

from

$81.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – Exhaust Intermediate Pipe (Part No.55512)

Exhaust Intermediate Pipe

from

$132.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.52441)

Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance

from

$32.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – Single – 3in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.19305)

Single - 3in Cat-Back Exhaust System - Super Turbo Muffler: Aluminized Steel

from

$528.99
Give your Chevrolet C1500/Silverado 1500 or GMC Sierra 1500’s exhaust system an upgrade with a DynoMax Super Turbo single 3-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow and reduces turbulence and fiberglass matting that absorbs unwanted interior resonance for a mellow tone.

Product Features:
  • COMPATIBILITY — Designed for 1999-2007 Chevrolet Silverado 1500, 2002 Chevrolet C1500, 1999-2007 GMC Sierra 1500 under 8,600-lb. GVWR; 119-in. wheelbase; see product information for compatibility and engine specs
  • COMPLETE SOLUTION — Includes DynoMax Super Turbo muffler, pipe and clamps
  • EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
  • EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
  • IMPROVED FLOW CAPACITY — Aluminized steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications; dyno proven to flow up to 551 SCFM
  • PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
  • ENGINEERED TO LAST¿–¿Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
  • ENGINEERED TO LAST┐–┐Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
  • SPECS — Welded 4-in. outlet single wall, buffed and polished stainless steel slant cut tip
See More

Dynomax – Hardware (Part No.36154)

Hardware

from

$37.49
Complete your exhaust repair with DynoMax exhaust system hangers. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax exhaust system hangers are manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • OE DESIGN — Designed with OE-style features (where applicable) for easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS¿–¿Made from quality steel for durability and long life
  • PREMIUM MATERIALS┐–┐Made from quality steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax« accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15792)

Street Series Cat-Back Performance Exhaust System

from

$938.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15792 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15792 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15792 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15778)

Street Series Cat-Back Performance Exhaust System

from

$863.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15778 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15778 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15778 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Flowmaster Inc. – Cat-back System – Dual Same Side Exit – American Thunder – Aggressive Sound (Part No.17392)

Cat-back System - Dual Same Side Exit - American Thunder - Aggressive Sound

from

$626.99
For the person who wants the aggressive look of a NASCAR race truck along with all the benefits that a Flowmaster Cat-back exhaust system provides. D.O.S.S. (Dual out same side) systems are the perfect choice. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More

Dynomax – 55516 Exhaust Tail Pipe (Part No.55516)

55516 Exhaust Tail Pipe

from

$186.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

In-Demand Performance Air Filters for 2005 GMC Sierra 1500s

Select from 2 premium Performance Air Filters parts for your 2005 GMC Sierra 1500, with prices ranging from $41.99 to $74.99.

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2129)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$74.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
  • REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
  • EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
See More

Spectre – Spectre Replacement Air Filter (Part No.HPR8755)

Spectre Replacement Air Filter

from

$41.99
This Spectre OEM replacement air filter is an easy to install performance option for the stock panel air filter in multiple Chevy and GM truck applications. With its HPR (High Performance Replacement) synthetic air filter media, this panel air filter has been designed to provide more horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock air box, this air filter is easy to install and has been engineered with a sealing edge specific to your air box to insure a proper seal for great engine protection.

Product Features:
  • HPR OE Replacement Air Filter
  • High flow replacement filter designed to fit perfectly in your stock air box
  • Engineered for increased flow and greater performance
  • Fits multiple Chevy and GM truck applications
  • Factory pre-oiled and ready to use
  • Easy to install with no special tools or skills required
See More

Most Sold 2005 GMC Sierra 1500 Performance Ignition Products

Explore our best-selling GMC parts for the 2005 Sierra 1500 among 1 OEM and aftermarket options starting from $123.99.

Auto Ventshade (AVS) – Eclipse; Large Hood Scoops (Part No.80001)

Eclipse; Large Hood Scoops

from

$123.99
LUND is the first automotive accessory manufacturer to develop and offer comprehensive packages to customize and personalize trucks, SUVs, and vans. An American-based company and the creator of the wrap hood shield category through the invention of the Interceptor hood shield, LUND designs and manufactures the most stylish, high performance, and premium automotive accessories for trucks and SUVs. Product categories include: Interceptor hood protection, nerf bars, running boards, tonneau covers, exterior accessories, storage boxes, cargo management, and bed accessories.

Product Features:
  • Unique, stylized hood scoops for trucks and cars
  • Transform stock hood into a simulated performance hood
  • Can easily be painted to match any factory color
See More

Top-Rated Performance and Racing Products Brands For Your 2005 GMC Sierra 1500

Shop for the best-rated brands offering Performance and Racing Products and other products for your 2005 GMC Sierra 1500s. Below you’ll find some of our best rated Performance and Racing Products from K&N, Spectre, and Dynomax, and more. Performance and Racing Products from these brands that fit a 2005 Sierra 1500 start at just $32.99 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 2005 GMC Sierra 1500 Performance and Racing Products

When it comes to maintaining or upgrading your 2005 GMC Sierra 1500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2005 GMC Sierra 1500. With over 4 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $74.99, with an average price of just $306.24. Plus, with over 225 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter
from
$449.99

(5)

Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter

“I’ve used these intakes on all my trucks for last 20 years! Ford Broncos, Chevy Tahoe, and now my Denali. I love the throttle response you get with th”

Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter
from
$349.99

(27)

Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter

“Increase in performance and gas mileage.”

Popular Spectre 2005 GMC Sierra 1500 Performance and Racing Products

Spectre auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2005 GMC Sierra 1500 owner should feel confident when installing genuine Spectre parts in their vehicle. To ensure the best fit and performance for your 2005 Sierra 1500, Advance Auto Parts carries a full inventory of 3 Spectre Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these Spectre Performance and Racing Products range from $41.99 to $199.99, plus, with more than 77 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

Cold Air Intake Kit Engineered to Add Horsepower & Torque
from
$199.99

(53)

Cold Air Intake Kit Engineered to Add Horsepower & Torque

“This kit was an easy install only took about an hour and 1/2. Anyone can do it. The pictures should be better in the instructions to show where the fi”

Spectre Replacement Air Filter
from
$41.99

(24)

Spectre Replacement Air Filter

“Great filter – cheaper than competition, comes pre oiled, easy to install. Using in high mileage Tahoe”

Cold Air Intake Kit Engineered to Add Horsepower & Torque
from
$199.99
This product is not rated

Cold Air Intake Kit Engineered to Add Horsepower & Torque

“”

FAQs for 2005 GMC Sierra 1500 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 2005 GMC Sierra 1500s?

Out of 41 Performance and Racing Products that fit 2005 GMC Sierra 1500s, the following parts are the top sellers:

What’s the price range for 2005 GMC Sierra 1500 Performance and Racing Products?

Performance and Racing Product prices for the 2005 GMC Sierra 1500 start at $32.99 and go up to $938.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 2005 GMC Sierra 1500?

The average price for Performance and Racing Products for the 2005 GMC Sierra 1500 is $311.33. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other GMC Sierra 1500 model years?

Yes, we currently carry Performance and Racing Products for 26 model years of GMC Sierra 1500s between 1999 and 2025. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 2005 GMC Sierra 1500?

The cheapest 2005 GMC Sierra 1500 Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 2005 GMC Sierra 1500?

Out of 6,190 reviews by customers, our 2005 GMC Sierra 1500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2005 GMC Sierra 1500 and their top-rated products:

What types of Performance and Racing Products do you sell for my 2005 GMC Sierra 1500?

Can I get help with 2005 GMC Sierra 1500 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.

What is your return policy for GMC Sierra 1500 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new GMC Sierra 1500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.