2005 GMC Canyon Engine Parts
Find Your Specific 2005 GMC Canyon Engine Parts
Below you will find various in-demand GMC Engine Parts, components and accessories for your 2005 Canyon. Advance Auto Parts has popular Canyon parts like Camshafts, Engine Gaskets and Seals, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other Canyon model years including
2012,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 2005 GMC Canyon Engine Parts below and start saving instantly.
Popular 2005 GMC Canyon Engine Parts Categories
Essential Engine Parts for 2005 GMC Canyons
ACDelco – Engine Crankshaft Position Sensor (Part No.213-4208)
from
$53.99
ACDelco GM Original Equipment Engine Crankshaft Position Sensors monitor the position and rotational speed of the crankshaft, and are GM-recommended replacements for your vehicle’s original components. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. These original equipment engine crankshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- This part requires programming andor special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Helps keep engine timing and fuel injection running in sync
- Helps provide proper alignment, positioning, and spacing for easy installation
- Synchronizes engine valves and pistons for excellent engine performance
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest – Camshaft Sensor (Part No.35C1009)
from
$49.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- 100% testing to meet OE performance
- High temperature resistance for longer life
Cloyes Gear – Engine Balance Shaft Chain (Part No.C919)
from
$20.99
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.
Product Features:
See More
Product Features:
- A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Refer to our online catalog for detailed application-specific information
- Keep your engine’s valvetrain in perfect time with Cloyes, the world leader in timing drive systems
Sealed Power – Engine Piston Set (Part No.H889CP)
from
$49.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Helps improve cylinder sealing for less blow-by
- Retains standard ring gaps in top groove
- DUROSHIELD skirt-coated piston
- Moly-graphite coating extends engine life
- Reduces friction for higher fuel economy
- Prevents damage from inadequate lubrication on start-up
GM Genuine Parts – Crankshaft Engine Oil Seal (Part No.12608750)
from
$11.49
GM Genuine Parts Engine Crankshaft Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These engine crankshaft seals are responsible for helping maintain the crankcase seal by sealing the openings on either end of the crankshaft. GM Genuine Parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Seals the openings on either end of the crankshaft for a tight seal
- Withstands heat and pressure to help prevent the engine from leaking oil
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
- GM regularly updates production and service part designs to integrate new materials and technologies
Cloyes Gear – Engine Timing Chain (Part No.9-4205)
from
$44.49
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.
Product Features:
See More
Product Features:
- A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26390 PT)
from
$157.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – TIMING COVER GASKET SET (Part No.TCS 45993)
from
$52.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Cloyes Gear – Engine Timing Chain Guide (Part No.9-5548)
from
$11.99
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Designed to meet or exceed OEM performance requirements. Refer to our online catalog for detailed application-specific information.
Product Features:
See More
Product Features:
- A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Designed to meet or exceed OEM performance requirements
- Refer to our online catalog for detailed application-specific information
National – Multi Purpose Seal (Part No.710237)
from
$44.49
Product Features:
See More
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg F to 400 Deg F / -40 Deg C to 204 Deg C
- Excellent high temperature capabilities
- Compatible with wide range of fluids
- Delivers quality and reliable performance for every type of repair
Melling – Stock Replacement Oil Pump Screen (Part No.378S)
from
$65.99
Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.
Product Features:
See More
Product Features:
- Manufactured from high quality durable materials for long wear
- Precision engineering protects the engine from dirt and contaminants
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Felpro – Engine Oil Filler Cap Seal (Part No.73193)
from
$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Victor Reinz – Molded Rubber Valve Cover Gasket Set: Direct Fit, Includes Grommets, 36 Pieces (Part No.15-10417-01)
from
$112.99
Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Application specific molded rubber construction
- Engineered cross section
- Includes all components required to complete the repair
GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2782)
from
$44.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Felpro – Engine Conversion Gasket Set (Part No.CS 26335)
from
$80.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
Cloyes Gear – CRANKSHAFT SPROCKET (Part No.S1120)
from
$32.99
Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Refer to our online catalog for detailed application-specific information.
Product Features:
See More
Product Features:
- Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)
from
$191.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
INA US – ENG TIMING CHAIN KIT (Part No.ZC-76314T)
from
$286.99
ENG TIMING CHAIN KIT
Spartan – Engine Long Block; Chev 2.9L 08-12 Engine (Part No.DCT30)
from
$3238.99
Reman Engines are dismantled & assembled by the same process each time: All heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is tested after assembly for compression, oil pressure & sealed water jacket.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1044)
from
$55.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.
Product Features:
See More
Product Features:
- Precision-wound coated copper windings increase product durability and life cycle.
- Hard-coated and anodized spool valve to prevent corrosion and increase service life.
- Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
- Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure product reliability, every time.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Dorman – Engine Timing Cover (Part No.635-430)
from
$169.99
This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.
Product Features:
See More
Product Features:
- Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
- Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
Sealed Power – Piston Ring Set (Part No.E-1024KC .25MM)
from
$208.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated top ring facings for enhanced performance under demanding conditions
- Second rings seat instantly, properly control inter-ring pressure to improve cylinder sealing, provide efficient piston-to-cylinder heat transfer and aid in effective oil control
- Oil rings are unequalled at controlling oil; design keeps tension uniform while assuring a positive seal
- In the box: compression rings, rails and oil spacer
Dorman – Harmonic Balancer Assembly (Part No.594-209)
from
$129.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.
Product Features:
See More
Product Features:
- Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction – stringent specifications and careful construction help ensure longevity
- Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Engine Oil Pan: Direct Fit, Aluminum, Sump, 5 Quart (Part No.264-483)
from
$209.99
Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
- Complete assembly – includes replacement pan and drain plugs to match original components
- Durable design – high-strength coating prevents future corrosion
- Trustworthy value – backed by team of engineers and quality control experts in the United States
National – Shaft Repair Sleeve (Part No.99128)
from
$41.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Cloyes Gear – Engine Balance Shaft Chain Tensioner (Part No.9-5511)
from
$55.99
A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Meet or exceed OEM performance requirements
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
National – Engine Crankshaft Seal (Part No.710551)
from
$24.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: springless; multi-lip
- Temperature range: -100 Deg. F to 450 Deg. F / -73 Deg. C to 232 Deg.
- Excellent dry running capabilities
- Low coefficient of friction
- Delivers quality and reliable performance for every type of repair
Felpro – Multi-Purpose O-Ring (Part No.35633)
from
$3.29
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Upgrade your 2005 GMC Canyon with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 2005 GMC Canyon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Engine Parts are key to keeping your Canyon functioning at its best. At Advance Auto Parts, we offer a wide selection of 78 Engine Parts for the 2005 GMC Canyon, designed to meet your needs without breaking the bank.
From
Camshaft
replacements to
Engine Gaskets and Seals
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2005 GMC Canyon at great prices.
Our Engine Parts inventory for this model
ranges from just $0.99 to $3,937.99, with
an average price of $126.95.
Our 78 Engine Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 2005 GMC Canyon without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 GMC Canyon, we stock popular OEM and aftermarket Engine Parts from top names
like FELPRO, National, Imperial, and more.
FELPRO Engine Parts
start at just $3.99 and boast an impressive 4.6 stars average rating from customers.
National and Imperial also bring quality to the table, with Engine Parts available starting at $8.99, and at an average 4.3 stars rating.
With 845 customer reviews and counting, our 2005 GMC Canyon Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2005 GMC Canyon is always ready to roll. We’re committed to providing you with everything you need to keep your Canyon in top shape, all in one place.
Start shopping confidently below for your 2005 GMC Canyon!
Best-Selling Camshafts for 2005 GMC Canyons
Enhance the driving experience in your GMC with 8 quality Camshaft components, starting at $17.99.
Carquest Premium – Camshaft Position Sensor (Part No.CSC1042)
from
$50.99
Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our camshaft position sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Engineered with technology that provides increased accuracy with a stronger, more consistent signal
- Sensors are based on proven hall effect and variable reluctance technology
- Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application
- O-rings and seals are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest – Camshaft Sensor (Part No.35C1009)
from
$49.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- 100% testing to meet OE performance
- High temperature resistance for longer life
GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2782)
from
$44.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Camshaft Sensor (Part No.CSC1208)
from
$42.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.
Product Features:
See More
Product Features:
- Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
- Manufactured in an anti-static environment to ensure reliability and stability.
- Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
- Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
NTK – Engine Camshaft Position Sensor (Part No.EC0230)
from
$58.99
The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.
Product Features:
See More
Product Features:
- THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
- OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
- EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
- PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
- INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors
Carquest Premium – Multi-Use Connector (Part No.PTA1154)
from
$17.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Multi-Use Connector (Part No.PTA1144)
from
$81.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Magnetic Camshaft Position Sensor (Part No.907-809)
from
$32.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
- Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Most Popular 2005 GMC Canyon Engine Gaskets and Seals
Customize your GMC with 6 Engine Gaskets and Seals products
like Valve Cover Gaskets,
Timing Cover Gasket Sets, and
Rear Main Seal Sets, all
priced under $80.99.
Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45052)
from
$38.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – REAR MAIN BEARING SEAL SET (Part No.BS 40705)
from
$32.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Engine Valve Cover Gasket Set (Part No.VS 50703 R)
from
$40.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
- SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
Felpro – Engine Oil Filler Cap Seal (Part No.73193)
from
$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Engine Valve Cover Gasket Set (Part No.VS 50704 R)
from
$41.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
- SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
Felpro – Engine Conversion Gasket Set (Part No.CS 26335)
from
$80.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
Top Picks for 2005 GMC Canyon Valve Cover and Cylinder Heads
Upgrade GMC Canyons with top-quality Valve Cover and Cylinder Heads parts, including 8 OEM and aftermarket selections for your 2005 model.
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71334)
from
$93.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26335 PT)
from
$111.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26336 PT)
from
$89.99
Product Features:
See More
- PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
- SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
- MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26336 PT)
from
$163.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26335 PT)
from
$66.99
Product Features:
See More
- PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
- SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
- MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Spartan – Engine Cylinder Head; Chev 3.5L 04-06 Cyl Head (Part No.2CTY)
from
$801.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Spartan – Engine Cylinder Head; Chev 2.8 04-05 Head (Part No.2CVF)
from
$659.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
INA US – Engine Valve Lifter (Part No.VT0186)
from
$6.99
Our high-quality valve train components are built to handle the hotter temperatures and higher pressure of increasingly smaller engines. These repair solutions can meet growing demands on the combustion process and help increase engine service life.
See More
In-Demand Engine Mounts for 2005 GMC Canyons
Select from 2 premium Engine Mounts parts for your 2005 GMC Canyon, with prices ranging from $55.99 to $65.99.
Anchor – Engine Mount: Front Left, 1 Piece (Part No.3121)
from
$65.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 04-12; GMC 04-12; HUMMER 06-10; ISUZU 06-08;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2004-2012
- Weight approx: 5 Lbs
- PART GROUP: 3120, 3121
Anchor – Engine Mount: Front Right, 1 Piece (Part No.3120)
from
$55.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 04-12; GMC 04-12; HUMMER 06-10; ISUZU 06-08;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2004-2012
- Weight approx: 5 Lbs
- PART GROUP: 3120, 3121
Most Sold 2005 GMC Canyon Engine Timing Parts
Explore our best-selling GMC parts for the 2005 Canyon among 22 OEM and aftermarket options starting from $23.99.
National – Shaft Repair Sleeve (Part No.99177)
from
$39.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
National – Shaft Repair Sleeve (Part No.99174)
from
$45.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Dorman – Variable Valve Timing Solenoid (Part No.917-010)
from
$70.99
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.
Product Features:
See More
Product Features:
- Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
- Durable construction – this part is made from quality materials to ensure a long service life
- Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
- Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
National – Engine Crankshaft Seal (Part No.710551)
from
$24.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: springless; multi-lip
- Temperature range: -100 Deg. F to 450 Deg. F / -73 Deg. C to 232 Deg.
- Excellent dry running capabilities
- Low coefficient of friction
- Delivers quality and reliable performance for every type of repair
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1003)
from
$75.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.
Product Features:
See More
Product Features:
- Precision-wound coated copper windings increase product durability and life cycle.
- Hard-coated and anodized spool valve to prevent corrosion and increase service life.
- Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
- Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure product reliability, every time.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
ACDelco – Variable Valve Timing (VVT) Solenoid (Part No.12615873)
from
$115.99
ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Coated to help protect against premature corrosion
- Designed to match OEM calibration to provide the performance you expect from GM
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 168 Links, Timing/Balance Shaft Components, With Sprockets (Part No.9-0195SC)
from
$248.99
Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: 9-5504 Engine Timing Chain Tensioner Guide (1 EA), 9-5506 Engine Timing Chain Guide (1 EA), 9-5511 Engine Balance Shaft Chain Tensioner (1 EA), 9-5512 Engine Timing Chain Tensioner (1 EA), C195 Engine Timing Chain (1 EA), C728F Engine Balance Shaft Chain (1 EA), S908 Engine Timing Camshaft Sprocket (1 EA), S913 Engine Timing Crankshaft Sprocket (1 EA).
Product Features:
See More
Product Features:
- Timing Chain Kits includes all components for a quick and efficient replacement
- Utilizes the latest in design and technology to offer a complete chain kit solution
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 168 Links, Timing Components, With Sprockets (Part No.9-0195S)
from
$302.99
Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: 9-5504 Engine Timing Chain Tensioner Guide (1 EA), 9-5506 Engine Timing Chain Guide (1 EA), 9-5512 Engine Timing Chain Tensioner (1 EA), C195 Engine Timing Chain (1 EA), S908 Engine Timing Camshaft Sprocket (1 EA), S913 Engine Timing Crankshaft Sprocket (1 EA).
Product Features:
See More
Product Features:
- Timing Chain Kits includes all components for a quick and efficient replacement
- Utilizes the latest in design and technology to offer a complete chain kit solution
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Chain Guide (Part No.9-5504)
from
$23.99
Extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Refer to our online catalog for detailed application-specific information.
Product Features:
See More
Product Features:
- A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements
- CAD designed and manufactured using premium materials
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Chain Kit (Part No.9-0195SCX)
from
$304.99
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. SET INCLUDES: 9-5504 Engine Timing Chain Tensioner Guide (1 EA), 9-5506 Engine Timing Chain Guide (1 EA), 9-5511 Engine Balance Shaft Chain Tensioner (1 EA), 9-5512 Engine Timing Chain Tensioner (1 EA), C195 Engine Timing Chain (1 EA), C728F Engine Balance Shaft Chain (1 EA).
Product Features:
See More
Product Features:
- Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
- Utilizes the latest in design and technology to offer a complete chain kit solution
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Gear – Engine Timing Chain (Part No.C195)
from
$91.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- 168 Links 8MM Roller. Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5512)
from
$58.99
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Meet or exceed OEM performance requirements. Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience.
Product Features:
See More
Product Features:
- A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Meet or exceed OEM performance requirements
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Cloyes Gear – Engine Timing Chain Guide (Part No.9-5506)
from
$29.99
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Designed to meet or exceed OEM performance requirements. Refer to our online catalog for detailed application-specific information.
Product Features:
See More
Product Features:
- A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Designed to meet or exceed OEM performance requirements
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S908)
from
$59.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
INA US – ENGINE TIMING SET (Part No.ZC-9-0195SC)
from
$446.99
ENGINE TIMING SET
INA US – ENGINE TIMING SET (Part No.ZC-9-0195SX)
from
$236.99
ENGINE TIMING SET
Dorman – Timing Cover Kit (Part No.635-521)
from
$173.99
This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.
Product Features:
See More
Product Features:
- Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
- Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
NTK – Engine Variable Valve Timing (VVT) Solenoid (Part No.VV0012)
from
$80.99
Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
- The VVT solenoids meets the demands of today’s VVT engines at both low and high RPMs.
- The VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
- The VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
- The VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
- The VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
- The VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S913)
from
$72.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
GM Genuine Parts – Timing Chain Tensioner (Part No.12598504)
from
$62.99
ACDelco GM Original Equipment Engine Timing Chain Tensioners help maintain a consistent amount of tension within the timing chain to help reduce the effect that slack has on the valve timing of the engine, and are GM-recommended replacements for your vehicle’s original components. These original equipment tensioners have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Provides consistent tension to help keep engine running in proper time
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Cloyes Gear – Engine Balance Shaft Chain Tensioner (Part No.9-5511)
from
$55.99
A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Meet or exceed OEM performance requirements
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Cloyes Gear – Engine Balance Shaft Chain (Part No.C728F)
from
$47.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- 1/4″ IT Pitch X 110 Links
Top-Rated Engine Parts Brands For Your 2005 GMC Canyon
Shop for the best-rated brands offering Engine Parts and other products for your 2005 GMC Canyons. Below you’ll find some of our best rated Engine Parts from FELPRO, National, and Imperial, and more. Engine Parts from these brands that fit a 2005 Canyon start at just $3.99 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2005 GMC Canyon Engine Parts
When it comes to maintaining or upgrading your 2005 GMC Canyon, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2005 GMC Canyon. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99, with an average price of just $25.32. Plus, with over 6 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular National 2005 GMC Canyon Engine Parts
National auto parts is one of the highest quality Engine Part brands in the market. Any 2005 GMC Canyon owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2005 Canyon, Advance Auto Parts carries a full inventory of 3 National Engine Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these National Engine Parts range from $8.99 to $45.99, plus, with more than 4 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.
from
$39.99
(1)
Shaft Repair Sleeve
“Easy to use, too early to tell how long it will last. It did stop the oil leak with a new oil seal on the front crankshaft pulley. 87 mercedes 300td.”
from
$45.99
(1)
Shaft Repair Sleeve
“To use this sleeve on a torque converter, the supplied tool isn’t long enough. However a piece of PVC pipe can work. (normally this is used on a harmo”
FAQs for 2005 GMC Canyon Engine Parts
Which Engine Parts are best-sellers for 2005 GMC Canyons?
Out of 78 Engine Parts that fit 2005 GMC Canyons, the following parts are the top sellers:
- Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (18481430) – $10.99
- Camshaft Position Sensor (12351341) – $50.99
- Engine Variable Valve Timing (VVT) Solenoid (12459516) – $75.99
What’s the price range for 2005 GMC Canyon Engine Parts?
Engine Part prices for the 2005 GMC Canyon start at $0.99 and go up to $3,937.99 for the most premium parts.
What’s the average price of a Engine Part for a 2005 GMC Canyon?
The average price for Engine Parts for the 2005 GMC Canyon is $126.95. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other GMC Canyon model years?
What are the cheapest Engine Parts for my 2005 GMC Canyon?
The cheapest 2005 GMC Canyon Engine Parts we carry in stock are:
- Engine Oil Dipstick Tube O-Ring (50251306) – $0.99
- Fuel Injector O-ring Set (15780910) – $3.99
- Engine Oil Filler Cap Seal (12005635) – $5.99
- Engine Valve Lifter (50262595) – $6.99
- Multi-Purpose Seal (18442603) – $8.99
What are the top-rated Engine Parts that fit the 2005 GMC Canyon?
Out of 845 reviews by customers, our 2005 GMC Canyon Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2005 GMC Canyon and their top-rated products:
- Engine Gaskets and Seals
- REAR MAIN BEARING SEAL SET (10081817) – $32.99
- Engine Timing Cover Gasket Set (20688502) – $38.99
- Engine Valve Cover Gasket Set (19783759) – $40.99
- Valve Cover and Cylinder Heads
- REAR MAIN BEARING SEAL SET (10081817) – $32.99
- Engine Timing Cover Gasket Set (20688502) – $38.99
- Engine Valve Cover Gasket Set (19783759) – $40.99
What types of Engine Parts do you sell for my 2005 GMC Canyon?
As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 2005 GMC Canyon:
Can I get help with 2005 GMC Canyon Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Engine Parts and more.
What is your return policy for GMC Canyon Engine Parts?
Advance Auto Parts keeps returns simple. For new GMC Canyon Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
