2005 Ford Ranger Fuel and Emissions Systems
Find Your Specific 2005 Ford Ranger Fuel and Emissions Systems
Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 2005 Ranger. Advance Auto Parts has popular Ranger parts like Fuel Injectors, Gas Caps, Oxygen Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Ranger model years including
2008,
2009,
2010,
2011,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2005 Ford Ranger Fuel and Emissions Systems below and start saving instantly.
Popular 2005 Ford Ranger Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 2005 Ford Rangers
Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPA1061)
from
$76.99
Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.
Product Features:
See More
Product Features:
- Provides closure for the EVAP system (normally vented) during OBD II test cycle
- Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
- Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
- Meets or exceeds all OEM specifications
Carquest Premium – Multi-Use Connector (Part No.PTA1191)
from
$46.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Multi-Purpose Harness (Part No.645-211)
from
$62.99
Make better electrical repairs and accessory installations with a Dorman pigtail connector. This idle air control valve connector is designed to match performance of the original equipment connector on specified vehicles. Engineered for a clean appearance when installed, Dorman connectors are ideal for neatly securing wiring jobs in automotive, commercial, industrial and household applications. Our pigtails are constructed from quality materials for long service life and resistance to the elements, and offer a range of features including locking tabs, weatherproof seals and more, where applicable. Check the product details to choose the best product for your electrical wiring needs.
Product Features:
See More
Product Features:
- Direct replacement – this idle air control valve connector is designed to match performance of the original equipment connector on specified vehicles
- Ensure fit – check the product details to choose the best product for your needs
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Wells Vehicle Electronics – Fuel Injector Repair Kit (Part No.2G2001)
from
$70.99
Product Features:
See More
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Dorman – Help – Idle Air Valve Gaskets (Part No.90102)
from
$4.99
This fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles
- Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Fuel Tank Straps (Part No.578-136)
from
$78.99
Product Features:
See More
- Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
- Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
- Durable construction – manufactured from quality materials for superior service and reliability
- Trustworthy design – backed by 100 years of automotive aftermarket experience
ACDelco – Multi-Purpose Pigtail (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, andor engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Idle Air Control Valve (Part No.ABC1955)
from
$52.99
Carquest Premium idle air control valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Idle air control valves, or sometimes known as idle air motors, are used to maintain the engine speed at idle by precisely adjusting the amount of air allowed to enter the intake. Our Carquest Premium idle air control (IAC) valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium idle air control valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium idle air control valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Precision engineering and robust design to withstand harsh under hood environment
- Gaskets or seals are included if required for installation
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Exhaust Gas Recirculation (EGR) Pressure Sensor (Part No.EGC2574)
from
$141.99
Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Dorman – Nylon Shield Retainer- Ford and GM (sold by each) (Part No.700-614)
from
$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1074)
from
$91.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
NTK – Ambient Air Temperature Sensor (Part No.EF0103)
from
$29.99
Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
Dorman – Help – High Temp Emissions Hoses (Part No.46019)
from
$15.99
This EGR pressure feedback hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this EGR pressure feedback hose is designed to match the fit and function of the original hose on specified vehicles
- Restores functionality – reliable replacement for an original hose that has failed due to pressure, heat and cracking
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – 5/16 In. Quick Connector, Straight w/ 18 In. of 3/8 In. Nylon Tube and a Union (Part No.800-054)
from
$26.99
Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.
Product Features:
See More
Product Features:
- Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance
- Quality construction – manufactured from premium materials for a long service life
- Saves money – replace only the part, not the entire assembly
- Excellent value – original equipment quality at a lower price
Motorcraft – REGULATOR-WINDW (Part No.WPT-359)
from
$63.99
REGULATOR-WINDW
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1083)
from
$21.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Dorman – Fuel Injector Adapter Kit (Part No.926-028)
from
$39.99
This fuel injector sleeve is a direct replacement for an original equipment part. Made of quality materials, this part has undergone try-on testing to ensure a quality fit and a long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this fuel injector sleeve is a direct replacement for the original equipment part on specified engines
- Durable construction – this part is made from quality materials to resist damage from fuel and extreme temperatures
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
Carquest Premium – Multi-Use Connector (Part No.PTA2964)
from
$58.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6278)
from
$97.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG0884)
from
$322.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Carquest Premium – Fuel Injection Idle Air Control Valve Gasket (Part No.ABA1161)
from
$4.49
The Fuel Injection Idle Air Control Valve controls the engine idle speed by allowing air to bypass the closed throttle plate. The idle air control valve gasket should be replaced any time the valve is removed for cleaning or service.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Fuel Filler Neck (Part No.577-909)
from
$193.99
Fuel filler neck leaking? This replacement fuel filler neck is precision-engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.
Product Features:
See More
Product Features:
- Direct replacement – this fuel filler neck is made to match the original equipment on specific vehicles
- Durable construction – made of corrosion-resistant materials to reduce future failure potential
- Regulatory compliant – built to meet emission and inspection standards
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Carquest Premium – Multi-Use Connector (Part No.PTA3077)
from
$52.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Carquest Premium – Multi-Use Connector (Part No.PTA2925)
from
$44.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Control Solenoid (Part No.EGC1015)
from
$45.99
The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
- Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Dorman – Exhaust Gas Recirculation Tube (Part No.598-127)
from
$72.99
This exhaust gas recirculation (EGR) line is designed to match the fit of an original EGR line on specified vehicles. It is engineered to help restore proper air-fuel balance when a line is malfunctioning due to deposits built up in the EGR valve.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust gas recirculation line is designed to match the fit and function of the original equipment EGR line
- Ideal solution – engineered to help restore proper air-fuel balance when a line is malfunctioning due to deposits built up in the EGR valve
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Fuel Pump Strainer FS1521184 (Part No.FS1521184)
from
$29.99
CARQUEST gradient density fuel pump strainers deliver reliable filtration and are the first line of defense against fuel system contaminants.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Dorman – Fuel Pump Lock Ring (Part No.579-003)
from
$10.49
This fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles. It is engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged. Manufactured to precise specifications for specified vehicles, it is made with durable materials for reliable performance and long life.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles
- Ideal solution – engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Upgrade your 2005 Ford Ranger with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2005 Ford Ranger, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Ranger functioning at its best. At Advance Auto Parts, we offer a wide selection of 105 Fuel and Emissions Systems for the 2005 Ford Ranger, designed to meet your needs without breaking the bank.
From
Fuel Injector
replacements to
Gas Caps
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2005 Ford Ranger at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $0.99 to $322.99, with
an average price of $66.21.
Our 105 Fuel and Emissions Systems in stock come from 15 trusted brands, so you’re sure to find the right part for your 2005 Ford Ranger without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Ford Ranger, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like Bosch, FELPRO, Carquest Premium, and more.
Bosch Fuel and Emissions Systems
start at just $59.99 and boast an impressive 4.7 stars average rating from customers.
FELPRO and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $4.99, and at an average 4.6 stars rating.
With 10,498 customer reviews and counting, our 2005 Ford Ranger Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2005 Ford Ranger is always ready to roll. We’re committed to providing you with everything you need to keep your Ranger in top shape, all in one place.
Start shopping confidently below for your 2005 Ford Ranger!
Best-Selling Fuel Injectors for 2005 Ford Rangers
Enhance the driving experience in your Ford with 19 quality Fuel Injector components, starting at $2.99.
Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1402)
from
$49.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)
from
$8.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Spectra Premium – Mass Air Flow Sensor (Part No.MA147)
from
$89.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
- Platinum connector threads reduce the number of connection points for faster reaction to change
- Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
- Ceramic board provides reliable voltage to eliminate engine rough-idle problems
- Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6206)
from
$75.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1782)
from
$51.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0012)
from
$91.99
Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.
Product Features:
See More
Product Features:
- Hitachi is a Tier 1 OE supplier for air flow sensors
- 100% NEW, never remanufactured
- Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
- Precision manufactured and assembled sensing elements for accurate air flow measurements
Carquest Premium – Fuel Injector Seal Kit (Part No.AS008)
from
$8.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Dorman – Fuel Injector Adapter Kit (Part No.926-028)
from
$39.99
This fuel injector sleeve is a direct replacement for an original equipment part. Made of quality materials, this part has undergone try-on testing to ensure a quality fit and a long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this fuel injector sleeve is a direct replacement for the original equipment part on specified engines
- Durable construction – this part is made from quality materials to resist damage from fuel and extreme temperatures
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings (Part No.217-3365)
from
$9.99
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)
from
$9.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61253)
from
$4.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Reman Multi Port Fuel Injector (Part No.A211-1932)
from
$55.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest – Fuel Injector Seal Kit (Part No.274838)
from
$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High-quality materials withstand extreme conditions
- Undergoes extensive testing to ensure reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61160)
from
$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Delphi – Mass Air Flow Sensor (Part No.AF10140)
from
$159.99
Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
- Delphi OE technology validated to match the vehicle applications
Continental – Multi-port Fuel Injector (Part No.FI11358S)
from
$49.99
VDO original equipment fuel injectors are identical fit, form, and function and provide the exact quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. VDO fuel injectors are designed for long service life and simplified installation. They are built in OE ISO TS certified facilities and manufactured to the highest quality standards. They offer dependable performance and robust design by being original equipment while still maintaining a competitive price.
Product Features:
See More
Product Features:
- The exact OEM part
- Exact form fit and function
- Simplified plug-and-play Installation
- Durable long-lasting design
- Made in the USA
- Made in ISO certified facilites
Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)
from
$8.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Carquest Premium – Fuel Injection Idle Air Control Valve Gasket (Part No.ABA1154)
from
$4.99
The Fuel Injection Idle Air Control Valve controls the engine idle speed by allowing air to bypass the closed throttle plate. The idle air control valve gasket should be replaced any time the valve is removed for cleaning or service.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Victor Reinz – Fuel Injection Idle Air Control Valve Gasket (Part No.71-13739-00)
from
$2.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Most Popular 2005 Ford Ranger Gas Caps
Customize your Ford with 3 Gas Caps products
like Gas Caps, all
priced under $33.49.
Carquest Premium – Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10840)
from
$22.29
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Tank Cap (Part No.10510)
from
$33.49
Product Features:
See More
- Reduces air pollution with proper sealing and venting
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC839T)
from
$30.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Come pre-assembled for quick and easy installation.
- Several fastener options to work with any fuel cap compartment configuration
- Fits vehicles orginally equipped with tether
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Top Picks for 2005 Ford Ranger Oxygen Sensors
Upgrade Ford Rangers with top-quality Oxygen Sensors parts, including 20 OEM and aftermarket selections for your 2005 model.
Motorcraft – O2 Sensor (Part No.DY-1401)
from
$72.99
O2 Sensor
Bosch – Oxygen Sensor: 4 Wire, 11.02" Long, Heated, Exact Fit (Part No.15664)
from
$66.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Exact Fit (Part No.15719)
from
$59.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
NTK – Switching Oxygen Sensor: 4 Wire, 17.75" Long, Heated, Direct Fit (Part No.22524)
from
$83.99
NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – Oxygen Sensor: 4 Wire, 18.82" Long, Heated, Exact Fit (Part No.234-4127)
from
$59.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
NTK – Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (Part No.22500)
from
$66.99
NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit (Part No.15717)
from
$61.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Bosch – Oxygen Sensor: 4 Wire, 10.63" Long, Heated, Exact Fit (Part No.15716)
from
$50.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Bosch – Oxygen Sensor: 4 Wire, 18.94" Long, Heated, Exact Fit (Part No.15718)
from
$50.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Bosch – Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit (Part No.13117)
from
$34.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15729)
from
$79.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
DENSO – Oxygen Sensor: 4 Wire, 10.83" Long, Heated, Exact Fit (Part No.234-4071)
from
$57.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)
from
$92.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
NTK – Switching Oxygen Sensor: 4 Wire, 22" Long, Heated, Direct Fit (Part No.22503)
from
$65.99
NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4212)
from
$69.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Motorcraft – O2 Sensor (Part No.DY-835)
from
$129.99
O2 Sensor
Carquest Premium – Multi-Use Connector (Part No.PTA1116)
from
$27.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
DENSO – Oxygen Sensor: 4 Wire, 11.02" Long, Heated, Exact Fit (Part No.234-4401)
from
$73.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
DENSO – Oxygen Sensor: Upstream, 4 Wire, 15.35" Long, Heated, Exact Fit (Part No.234-4403)
from
$72.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
DENSO – Oxygen Sensor: 4 Wire, 23.82" Long, Heated, Exact Fit (Part No.234-4070)
from
$59.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
In-Demand Fuel Pumps for 2005 Ford Rangers
Select from 8 premium Fuel Pumps parts for your 2005 Ford Ranger, with prices ranging from $29.99 to $322.99.
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG0881)
from
$299.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M2480520)
from
$249.99
Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Fuel Pump Module Assembly M3496123: Fuel Pump, Sending Unit and Strainer (Part No.M3496123)
from
$274.99
Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M2480527)
from
$197.99
Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG0882)
from
$322.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Carquest Premium – Fuel Pump Strainer FS1521184 (Part No.FS1521184)
from
$29.99
CARQUEST gradient density fuel pump strainers deliver reliable filtration and are the first line of defense against fuel system contaminants.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Carquest Premium – Multi-Use Connector (Part No.PTA2964)
from
$58.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Most Sold 2005 Ford Ranger Air Flow Sensors
Explore our best-selling Ford parts for the 2005 Ranger among 10 OEM and aftermarket options starting from $0.99.
NTK – Ambient Air Temperature Sensor (Part No.EF0103)
from
$29.99
Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1074)
from
$91.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Carquest Premium – Multi-Use Connector (Part No.ABA3461)
from
$13.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
ACDelco – Multi-Purpose Pigtail (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, andor engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Multi-Use Connector (Part No.PTA1146)
from
$25.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1064)
from
$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Motorcraft – Wire Assembly (Part No.WPT-322)
from
$69.99
Wire Assembly
Carquest Premium – Multi-Use Connector (Part No.PTA2925)
from
$44.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Carquest Premium – Multi-Use Connector (Part No.PTA1346)
from
$41.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Nylon Shield Retainer- Ford and GM (sold by each) (Part No.700-614)
from
$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Top-Rated Fuel and Emissions Systems Brands For Your 2005 Ford Ranger
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2005 Ford Rangers. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, FELPRO, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2005 Ranger start at just $4.99 and are rated as high as 4.7 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Bosch 2005 Ford Ranger Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2005 Ford Ranger, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 2005 Ford Ranger. With over 3 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $59.99, with an average price of just $62.99. Plus, with over 185 customer reviews and an average rating of 4.7 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular FELPRO 2005 Ford Ranger Fuel and Emissions Systems
FELPRO auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2005 Ford Ranger owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2005 Ranger, Advance Auto Parts carries a full inventory of 3 FELPRO Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these FELPRO Fuel and Emissions Systems range from $4.99 to $6.49, plus, with more than 42 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.
from
$4.99
(2)
Fuel Injection Idle Air Control Valve Seal
“This gasket was for my 2003 ford ranger edge which has a IAC, it would have a high idle but when I changed the gasket and cleaned the iac with throttl”
from
$6.49
(1)
Exhaust Gas Recirculation (EGR) Valve Gasket
“Fixed my problem and I’m back driving again”
FAQs for 2005 Ford Ranger Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 2005 Ford Rangers?
Out of 105 Fuel and Emissions Systems that fit 2005 Ford Rangers, the following parts are the top sellers:
- Fuel Injector O-Ring Kit (3504360) – $8.49
- O2 Sensor (11977682) – $72.99
- Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (20501734) – $66.99
What’s the price range for 2005 Ford Ranger Fuel and Emissions Systems?
Fuel and Emissions System prices for the 2005 Ford Ranger start at $0.99 and go up to $322.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 2005 Ford Ranger?
The average price for Fuel and Emissions Systems for the 2005 Ford Ranger is $66.21. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford Ranger model years?
What are the cheapest Fuel and Emissions Systems for my 2005 Ford Ranger?
The cheapest 2005 Ford Ranger Fuel and Emissions Systems we carry in stock are:
- Nylon Shield Retainer- Ford and GM (sold by each) (10916178) – $0.99
- Fuel Injection Idle Air Control Valve Seal (20780491) – $2.99
- Fuel Injection Idle Air Control Valve Gasket (12547257) – $2.99
- Exhaust Gas Recirculation (EGR) Valve Gasket (20688691) – $3.99
- Idle Air Valve Gaskets (17191248) – $4.99
What are the top-rated Fuel and Emissions Systems that fit the 2005 Ford Ranger?
Out of 10,498 reviews by customers, our 2005 Ford Ranger Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2005 Ford Ranger and their top-rated products:
- Idle Air Control Parts
- Fuel Injection Idle Air Control Valve Seal (10700421) – $4.99
- Fuel Injection Idle Air Control Valve Seal (20780491) – $2.99
- Idle Air Valve Gaskets (17191248) – $4.99
What types of Fuel and Emissions Systems do you sell for my 2005 Ford Ranger?
As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2005 Ford Ranger:
Can I get help with 2005 Ford Ranger Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.
What is your return policy for Ford Ranger Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Ford Ranger Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
