2005 Ford Mustang Performance and Racing Products

Name: Axle-back System 409S - Dual Rear Exit - Outlaw - Aggressive Sound
Brand: Flowmaster Inc.
SKU: 817592
Price: 620.99 USD

Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 2005 Mustang. Advance Auto Parts has popular Mustang parts like Performance Oil Filters, Performance Air Intake Kits, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Mustang model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2005 Ford Mustang Performance and Racing Products below and start saving instantly.

Popular 2005 Ford Mustang Performance and Racing Products Categories

Computer Chip Programmers

Performance Coils

Performance Air Intake Kits

Performance Exhaust Mufflers

Performance Computer Prom and Chips

Engine Cold Air Intakes

Performance Exhaust System Kits

Performance Flywheel and Flexplates

Performance Posi Units and Components

Performance Ignition Kits

Performance Upper Performance Control Arm Bushings

Performance Ring and Pinions

Performance Sway Bar Link Kits

Performance Track Bars and Bushings

Performance Sway Bar Bushings

Performance Oil Filler Caps

Performance Nitrous Systems

Nitrous Oxide Injection System Kit

Manual Transmission Main Shaft Race

Essential Performance and Racing Products for 2005 Ford Mustangs

from

$620.99

Outlaw exhaust systems feature the race developed and proven Outlaw mufflers for a very aggressive sound outside the vehicle with a moderate interior sound level. As an Axle-back exhaust, this direct bolt on Outlaw system is easily installed at home and will add the performance improvements you expect from Flowmaster. The 4.00 in. polished stainless tips provide a performance look, while a lifetime limited warranty provides assurance that this American made exhaust will last.

Product Features:

Stainless steel construction
Dyno tuned for maximum performance
Flowmaster’s most aggressive system
Made in the USA
Premium Flowmaster quality

from

$77.99

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:

Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Standard Motor Products SMP Fd-478
MSD 5527
Standard Motor Products SMP Fd-478
MSD 5527
Resists Shock And Vibration
Resists Corrosion

from

$456.99

The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

Product Features:

Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
Reads and clears DTC (Diagnostic Trouble Codes) with ease.
Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
Full color LCD display
High-speed data logging/monitoring
Dual analog inputs
Most popular vehicles supported
Installs quickly and easily
Easy restoration back to stock
User adjustable vehicle parameters
USB Interface cable included
Product might not be available in all states due to local laws.

from

$643.99

Edelbrock Part #15808 Edelbrock Competition Air Intake kit provides the increased airflow needed for 2005-09 Mustang GT racing applications. It includes a high flow Mass airflow Sensor, 7.85in. long reusable open element filter, plastic shroud and all nec

Product Features:

Red Filter Color
Cotton Gauze Filter Material
Cone Filter Shape
7.85 Overall Length
95mm Housing Diameter

from

$349.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$7.69

CUP

from

$469.99

The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.

Product Features:

HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
Reads and Erases Diagnostic Trouble Codes
Display Over 15 Vehicle Parameters
Installation Is Easy-10-20 Minutes
Free Internet Updates And Upgrades
30 Day Money Back Guarantee

from

$64.99

OilFillerCapCvr

from

$30.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$97.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$246.99

Product Features:

FRD 10BLT 9.0 R/P 4.30 MGP

from

$379.99

RngPnn

from

$163.99

Flywheels

from

$137.99

Flywheels

from

$98.99

Product Features:

MINI SPOOL 8.8 FORD 28SPL

from

$151.99

MiniSpool

from

$33.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$176.99

Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.

Product Features:

Easily install two DIS-4 Ignitions on late model Ford Engines
Easy Connections w/No Splicing Or Cutting Into Factory Wiring
Wiring the system will take only an hour
Multiple direct plug in connectors
Wiring the system will only take and hour

from

$91.99

Put an end to high maintenance point ignition systems by utilizing a specialized electronic circuitry and an infrared signal. Stabilizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.

Product Features:

Most Accurate Ignition Timing System
Improves Performance And Fuel Economy
Easy To Install With Simple Hand Tools
Reduced Maintenance
Eliminates Changing Points

from

$1113.99

Product Features:

Features 10 lbs. Bottle Capacity
For 4500 Series Carbs
Between 100-250 HP
2-Stage Performer RPM
Includes All Necessary Installation Items

from

$837.99

Product Features:

Power Increases From 80-100 HP
Supplies Nitrous Directly Into The Intake System
Detailed Instructions

from

$882.99

Available in different sizes for many different vehicle models/years. Designed for EFI models. Power increases from 50-150 HP. Supplies nitrous directly into the intake system. Not for sale or use on pollution-controlled motor vehicles. In the early days of the automotive performance industry, you either ran what was available or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:

Designed for EFI Fords
80 HP power increase
Supplies Nitrous Directly Into The Intake Stream

from

$989.99

You know how a dual stage system can let you leave the line at moderate horsepower levels for maximum traction and then bring a second stage in for up to 150 extra HP on the big end. NOS now offers a kit to convert your Stage II kit into a two stage kit.

Product Features:

Injects Nitrous To Intake Tract
Extra Fuel Sent By E.F.I.
Produce 75 Extra Horsepower
Excellent Mixture Atomization
Eliminates Pudding Fuel
50-State Smog Legal

from

$154.99

The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$113.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$18.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$18.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$22.99

Allows Sway Bar System to Work At 100% Efficiency
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

Upgrade your 2005 Ford Mustang with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 2005 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 47 Performance and Racing Products for the 2005 Ford Mustang, designed to meet your needs without breaking the bank. From Performance Oil Filter replacements to Performance Air Intake Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2005 Ford Mustang at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.69 to $926.99, with an average price of $275.85. Our 47 Performance and Racing Products in stock come from 19 trusted brands, so you’re sure to find the right part for your 2005 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Ford Mustang, we stock popular OEM and aftermarket Performance and Racing Products from top names like Flowmaster Inc., Accel, Bully Dog, and more. Flowmaster Inc. Performance and Racing Products start at just $99.99 and boast an impressive 4 stars average rating from customers. Accel and Bully Dog also bring quality to the table, with Performance and Racing Products available starting at $24.99, and at an average 4 stars rating. With 64 customer reviews and counting, our 2005 Ford Mustang Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 2005 Ford Mustang!

Best-Selling Performance Oil Filters for 2005 Ford Mustangs

Enhance the driving experience in your Ford with 1 quality Performance Oil Filter components, starting at $64.99.

show more show less

from

$64.99

OilFillerCapCvr

Most Popular 2005 Ford Mustang Performance Air Intake Kits

Customize your Ford with 6 Performance Air Intake Kits products like Engine Cold Air Intakes and Performance Air Intake Kits, all priced under $643.99.

show more show less

from

$349.99

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$399.99

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$349.99

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$199.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
WILL NOT VOID VEHICLE WARRANTY
Product might not be available in all states due to local laws.

from

$643.99

Red Filter Color
Cotton Gauze Filter Material
Cone Filter Shape
7.85 Overall Length
95mm Housing Diameter

from

$428.99

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

Uses Pro DRY S Air Filter For Maximum Convenience
Rotomolded Plastic Tube For Maximum Air Flow
91% cfm Flow Gain
Improved Throttle Response

Top Picks for 2005 Ford Mustang Performance Exhaust Products

Upgrade Ford Mustangs with top-quality Performance Exhaust Products parts, including 7 OEM and aftermarket selections for your 2005 model.

show more show less

from

$113.99

from

$877.99

Give your Ford Mustang’s exhaust system an upgrade with a DynoMax Ultra Flo welded 2.5-in. dual cat-back exhaust system. Features two DynoMax Ultra Flo welded mufflers that feature Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:

COMPATIBILITY — Designed for 2005-2009 Ford Mustang; see product information for compatibility and engine specs
COMPLETE SOLUTION — Includes two DynoMax Ultra Flo welded mufflers, pipes, X-pipe, brackets and clamps
EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure
PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
ENGINEERED TO LAST — Stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
ENGINEERED TO LAST — Stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
NOTES — Welded 3.5-in. outlet double wall, buffed and polished stainless-steel slant cut tips

from

$99.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$99.99

from

$249.99

DynoMax Ultra Flo¿ Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$599.99

Flowmaster’s Outlaw Axle-back systems are race-oriented systems designed to replace original rear mounted mufflers located behind the rear axle using factory style connections. Outlaw systems deliver an ultra aggressive interior and exterior tone and are suited to the enthusiast who wants the most aggressive components they can purchase. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

Product Features:

Mandrel bent 16 gauge 409 stainless tubing
Aggressive and powerful exterior exhaust tone
Includes hangers and hardware for easy installation
Axle back system
Dyno tuned for maximum performance

from

$143.99

This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

In-Demand Performance Steering Products for 2005 Ford Mustangs

Select from 5 premium Performance Steering Products parts for your 2005 Ford Mustang, with prices ranging from $20.99 to $41.99.

show more show less

from

$40.99

Allows Sway Bar System to Work At 100% Efficiency
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$20.99

Allows Sway Bar System to Work At 100% Efficiency
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$41.99

Allows Sway Bar System to Work At 100% Efficiency
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$22.99

Allows Sway Bar System to Work At 100% Efficiency
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$33.99

Product Features:

Made from HYPER-Flex Polyurethane

Most Sold 2005 Ford Mustang Performance Ignition Products

Explore our best-selling Ford parts for the 2005 Mustang among 2 OEM and aftermarket options starting from $24.99.

show more show less

from

$24.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:

Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
Advanced Bobbin Technology
Direct Plug In Replacement results in a Direct OE Fit
OBD ll Safe, so you won’t be throwing codes, just sparks
Standard Motor Products SMP Fd-508
MSD 8243 82438
Resists Shock And Vibration
Resists Corrosion

from

$176.99

Easily install two DIS-4 Ignitions on late model Ford Engines
Easy Connections w/No Splicing Or Cutting Into Factory Wiring
Wiring the system will take only an hour
Multiple direct plug in connectors
Wiring the system will only take and hour

Top-Rated Performance and Racing Products Brands For Your 2005 Ford Mustang

Shop for the best-rated brands offering Performance and Racing Products and other products for your 2005 Ford Mustangs. Below you’ll find some of our best rated Performance and Racing Products from Flowmaster Inc., Accel, and Bully Dog, and more. Performance and Racing Products from these brands that fit a 2005 Mustang start at just $24.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Flowmaster Inc. 2005 Ford Mustang Performance and Racing Products

When it comes to maintaining or upgrading your 2005 Ford Mustang, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Flowmaster Inc. ticks all of those boxes. We offer a wide selection of Flowmaster Inc. Performance and Racing Products, specifically designed for the 2005 Ford Mustang. With over 5 Flowmaster Inc. brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $99.99, with an average price of just $211.59. Plus, with over 17 customer reviews and an average rating of 4 stars, you can trust that our Flowmaster Inc. Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$113.99

(1)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

“sounds great just what I WAS LOOKING FOR.”

from
$143.99

This product is not rated

40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

“”

from
$599.99

This product is not rated

Axle-back System 409S – Dual Rear Exit – Outlaw – Aggressive Sound

“”

Popular Accel 2005 Ford Mustang Performance and Racing Products

Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2005 Ford Mustang owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 2005 Mustang, Advance Auto Parts carries a full inventory of 1 Accel Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Accel Performance and Racing Products range up to $24.99, plus, with more than 10 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from
$24.99

(10)

Coil:Ford Mod Eng 3-Valve

“Had replaced one , then another at $100. each time. So my husband and I decided to replace them all and what a difference. Drives better than since ”

FAQs for 2005 Ford Mustang Performance and Racing Products

Which Performance and Racing Products are best-sellers for 2005 Ford Mustangs?

Out of 47 Performance and Racing Products that fit 2005 Ford Mustangs, the following parts are the top sellers:

40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (16120043) – $99.99
Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (11051146) – $469.99
Coil:Ford Mod Eng 3-Valve (10027463) – $24.99

What’s the price range for 2005 Ford Mustang Performance and Racing Products?

Performance and Racing Product prices for the 2005 Ford Mustang start at $7.69 and go up to $926.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 2005 Ford Mustang?

The average price for Performance and Racing Products for the 2005 Ford Mustang is $275.85. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Ford Mustang model years?

Yes, we currently carry Performance and Racing Products for 56 model years of Ford Mustangs between 1964 and 2025. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 2005 Ford Mustang?

The cheapest 2005 Ford Mustang Performance and Racing Products we carry in stock are:

CUP (50206003) – $7.69
Sway Bar Bushing Set (22908744) – $20.99
Differential Pinion Solid Spacer Kit w/Shims (19640050) – $22.79
Sway Bar Bushing Set (22908745) – $22.99
Coil:Ford Mod Eng 3-Valve (10027463) – $24.99

What are the top-rated Performance and Racing Products that fit the 2005 Ford Mustang?

Out of 64 reviews by customers, our 2005 Ford Mustang Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2005 Ford Mustang and their top-rated products:

Performance Air Intake Kits
- Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter (22400994) – $349.99
- Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (22400040) – $399.99
- Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (22401349) – $349.99

What types of Performance and Racing Products do you sell for my 2005 Ford Mustang?

As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 2005 Ford Mustang:

Can I get help with 2005 Ford Mustang Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

What is your return policy for Ford Mustang Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Ford Mustang Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 Ford Mustang Performance and Racing Products

Flowmaster Inc. – Axle-back System 409S – Dual Rear Exit – Outlaw – Aggressive Sound (Part No.817592)

Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)

Edelbrock – Competition Air Intake Kit #15808 For 05-09 Mustang GT (Part No.15808)

K&N – Cold Air Intake: Adds Up To 30 Horsepower, With Million Mile Air Filter (Part No.57-2545)

FAG US – CUP (Part No.LM48510)

Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)

Mr. Gasket – OilFillerCapCvr (Part No.6713G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5166G)

Energy Suspension – Control Arm Bushing Set (Part No.4.3144R)

Motive Gear – Performance Differential Ring and Pinion (Part No.F890430)

Richmond Gear – RngPnn (Part No.69-0290-1)

Hays – Flywheels (Part No.12-071)

Hays – Flywheels (Part No.12-030)

Motive Gear – Differential Mini Spool (Part No.MS88-28)

Richmond Gear – MiniSpool (Part No.78-8831-1)

Energy Suspension – Track Bar Bushing Set (Part No.4.7129G)

MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)

Accel – Module:Eliminator Replacement (Part No.2005)

Edelbrock – Performer RPM Carb/Plate Nitrous Systems for 4500 Series Carbs (100-250 Hp) (Part No.70004)

Edelbrock – Performer EFI Dry Systems for 2003-04 Ford Mustang Cobra Svt (80,100 Hp) (Part No.70404)

Edelbrock – Performer Ford EFI Nitrous Systems for 1986-95 Mustang 5.0L/1996-98 4.6L (80 Hp) (Part No.70400)

NOS/Nitrous Oxide Systems – Ford EFI; Nitrous System (Part No.05115NOS)

Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5113R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5136R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5193G)

Mr. Gasket – OilFillerCapCvr (Part No.6713G)

K&N – Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter (Part No.57-2565)

K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (Part No.69-3522TP)

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.57-2566)

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9926)

Edelbrock – Competition Air Intake Kit #15808 For 05-09 Mustang GT (Part No.15808)

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 13 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-11312)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)

Dynomax – Dual – 2.5in Cat-Back Exhaust System – Ultra Flo Welded Mufflers: Stainless Steel (Part No.39434)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)

Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42543)

Dynomax – Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 3.5" Out, Oval (Part No.17572)

Flowmaster Inc. – Axle-back System 409S – Dual Rear Exit – Outlaw – Aggressive Sound (Part No.817511)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942443)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5191R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5193R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5191G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5193G)

Energy Suspension – Track Bar Bushing Set (Part No.4.7129G)

Accel – Coil:Ford Mod Eng 3-Valve (Part No.140033)

MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)