2005 Ford Five Hundred Suspension Parts

Name: Strut-Mate Strut Mounting Kit
Brand: Monroe
SKU: L3033570025MNR
Price: 140.51 USD

Below you will find various in-demand Ford Suspension Parts, components and accessories for your 2005 Five Hundred. Advance Auto Parts has popular Five Hundred parts like Coil and Leaf Springs, Air Suspension and Kits, Shocks and Struts and more. You’ll also find aftermarket and OEM Suspension Parts for other Five Hundred model years including 2006 2007 and more. Select a category of 2005 Ford Five Hundred Suspension Parts below and start saving instantly.

Popular 2005 Ford Five Hundred Suspension Parts Categories

Suspension Self-Leveling Unit Fluids

Suspension Strut and Coil Spring Assemblies

Rear Shock and Struts

Front Shock and Struts

Front and Rear Shock or Strut Kits

Lower Control Arms

Suspension Strut Mounting Kits

Shock Boots, Levelers, and Accessories

Trailing Arms

Lower Control Arm Bushings

Strut Bellows

Strut Mounts

Lateral Arms

Trailing Arm Bushings

Suspension Knuckle Bushings

Suspension Strut Hardware Kits

Essential Suspension Parts for 2005 Ford Five Hundreds

from

$140.51

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:

Strut Mount
Bearing
Upper Spring Isolator
Lower Spring Isolator
Upper Spring Seat

from

$148.88

The KYB Excel-G OE-equivalent direct fit shock absorber is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions.

Product Features:

Direct fit application for ease of installation
Calibrated to compensate for worn suspensions
Components and valving are designed specifically for each application
The best choice to restore OE performance and normal driving conditions
Built with quality that matches or exceeds OE
Coverage for domestic and import cars, trucks, vans, minivans, and SUVs

from

$65.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils

from

$12.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

High level bonding adhesive is used for durability
Provides like-new steering, ease of installation and longer life
Elastomer compounds do not utilize any reground rubber fillers
Incorporates proven design and engineering features
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$78.99

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$16.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Incorporates proven design and engineering features

from

$81.57

Rigorously tested for sustained, secure performance by a team of product and quality engineers, our Lateral Arm is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

Direct replacement for a trouble-free installation
Bushings included for a complete installation, saving time and labor (where applicable)
Corrosion-resistant for long-lasting performance
A rigorous quality inspection has been undertaken to ensure that this part conforms to standards

from

$489.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$36.49

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$6.29

Max Performance Synthetic Power Steering Fluid

from

$18.99

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$179.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$264.99

Quick Strut Kit

from

$37.49

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$197.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$179.99

Quick Strut

from

$74.34

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Pivot for the steering mechanism, providing a smooth steering response
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$58.06

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$127.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$81.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$103.99

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$379.99

Quick Strut Kit

from

$359.99

Quick Strut Kit

from

$264.99

Quick Strut Kit

from

$39.49

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Upgrade your 2005 Ford Five Hundred with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2005 Ford Five Hundred, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Suspension Parts are key to keeping your Five Hundred functioning at its best. At Advance Auto Parts, we offer a wide selection of 76 Suspension Parts for the 2005 Ford Five Hundred, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Air Suspension and Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2005 Ford Five Hundred at great prices. Our Suspension Parts inventory for this model ranges from just $6.29 to $489.99, with an average price of $139.22. Our 76 Suspension Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 2005 Ford Five Hundred without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Ford Five Hundred, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline, Moog, Monroe, and more. Valvoline Suspension Parts start at just $36.49 and boast an impressive 5 stars average rating from customers. Moog and Monroe also bring quality to the table, with Suspension Parts available starting at $10.49, and at an average 4 stars rating. With 1,404 customer reviews and counting, our 2005 Ford Five Hundred Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Ford Five Hundred is always ready to roll. We’re committed to providing you with everything you need to keep your Five Hundred in top shape, all in one place. Start shopping confidently below for your 2005 Ford Five Hundred!

Best-Selling Coil and Leaf Springs for 2005 Ford Five Hundreds

Enhance the driving experience in your Ford with 9 quality Coil and Leaf Spring components, starting at $134.99.

show more show less

from

$179.99

Quick Strut

from

$179.99

Quick Strut

from

$351.99

Carquest complete strut assemblies include all the components required for strut replacement. The Carquest strut assembly has been rigorously quality-tested, providing high-quality, proven reliability and reducing installation time. The Carquest strut assembly has been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

Premium quality, U.S. grade steel, corrosion resistant coil spring.
NOK seals, steel piston valves, hard-chromed piston rod and premium oil.
Urethane rubber molded boot kit & bumper.
OEM quality upper strut mount, bearing plate and brackets.
Ready to install. Save time, eliminating installation processes like removing coil springs.
An economical replacement alternative to ensure a complete repair. Save money from investing in expensive spring compressors.

from

$277.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$243.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$197.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$187.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$159.99

from

$134.99

Quick Strut

Top Picks for 2005 Ford Five Hundred Shocks and Struts

Upgrade Ford Five Hundreds with top-quality Shocks and Struts parts, including 39 OEM and aftermarket selections for your 2005 model.

show more show less

from

$112.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

KYB Recommended Orem Replacement Strut
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Five Hundred Or Montego
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

from

$18.99

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$37.49

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$179.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$179.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$122.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$264.99

Quick Strut Kit

from

$313.99

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$28.49

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$351.99

Premium quality, U.S. grade steel, corrosion resistant coil spring.
NOK seals, steel piston valves, hard-chromed piston rod and premium oil.
Urethane rubber molded boot kit & bumper.
OEM quality upper strut mount, bearing plate and brackets.
Ready to install. Save time, eliminating installation processes like removing coil springs.
An economical replacement alternative to ensure a complete repair. Save money from investing in expensive spring compressors.

from

$277.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$243.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$207.51

TRW Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance, and quality standards. TRW products have the best dampening characteristics with an application-tunedENDURANCE Polished Working Cylinder: SACHS working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.

from

$197.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$197.66

TRW Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance, and quality standards. TRW products have the best dampening characteristics with an application-tuned valve pairing longevity with superior comfort and control for vehicles in any road condition.ENDURANCE Polished Working Cylinder: SACHS working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.

from

$189.99

Quick Strut

from

$189.99

Quick Strut

from

$187.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$175.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Meets or exceeds OE requirements
Helps restore vehicle ride.
Reduces tire wear

from

$164.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$164.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$159.99

from

$148.88

Direct fit application for ease of installation
Calibrated to compensate for worn suspensions
Components and valving are designed specifically for each application
The best choice to restore OE performance and normal driving conditions
Built with quality that matches or exceeds OE
Coverage for domestic and import cars, trucks, vans, minivans, and SUVs

from

$144.58

The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.

Product Features:

Restores OE performance
One way anti-foaming valve reduces foaming and performance fade
Three stage dual valving
Teflon coated piston valve
Seamless inner cylinder and eye ring, no leaks
Bonded bushings and sleeves
Hard chromed piston rod

from

$141.39

Restores OE performance
One way anti-foaming valve reduces foaming and performance fade
Three stage dual valving
Teflon coated piston valve
Seamless inner cylinder and eye ring, no leaks
Bonded bushings and sleeves
Hard chromed piston rod

from

$134.99

Quick Strut

from

$134.99

Complete Strut Assem

from

$134.99

Quick Strut

from

$122.60

Strut Mount

from

$107.64

Strut Mount

from

$86.99

Meets or exceeds OE requirements
Helps restore vehicle ride.
Reduces tire wear

from

$85.99

Meets or exceeds OE requirements
Helps restore vehicle ride.
Reduces tire wear

from

$75.99

Meets or exceeds OE requirements
Helps restore vehicle ride.
Reduces tire wear

from

$75.99

Meets or exceeds OE requirements
Helps restore vehicle ride.
Reduces tire wear

from

$74.34

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Pivot for the steering mechanism, providing a smooth steering response
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$58.06

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$58.06

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$46.82

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$45.78

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

In-Demand Control Arms for 2005 Ford Five Hundreds

Select from 18 premium Control Arms parts for your 2005 Ford Five Hundred, with prices ranging from $10.49 to $489.99.

show more show less

from

$95.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$78.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$25.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$127.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$10.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$24.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$12.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$81.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$70.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$17.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$24.29

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$489.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$145.21

The ISG control arm is designed and manufactured to exact OEM specifications providing original equipment quality, durability and performance. ISG control arms incorporate ball joints and include bushings that are either original equipment or provide OE-equivalent quality, fit and form.

Product Features:

Designed to fit right the first time, all geometry and pivot axis match OEM placement
Manufactured at TS16949 facilities (OEM grade)
All parts are designed and quality approved using PPAP (Production Part Approval Process)
Available in Forged Steel, Stamped Steel & Forged Aluminum (all meet or exceed OEM specifications)
Service kits are included where applicable, nuts, washers, cotter pins, & zerk fittings
European applications benefit from low friction ball sockets for precise steering feel

from

$112.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$109.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$82.36

Restore a smooth ride, directional stability, and agile handling with Dorman’s suspension components. Dorman’s tough rubber construction ensures durability.

Product Features:

Direct replacement for a trouble-free installation
Weather resistant
Replace the worn bushing, not the entire control arm
A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards

from

$81.57

Direct replacement for a trouble-free installation
Bushings included for a complete installation, saving time and labor (where applicable)
Corrosion-resistant for long-lasting performance
A rigorous quality inspection has been undertaken to ensure that this part conforms to standards

from

$16.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Incorporates proven design and engineering features

Most Sold 2005 Ford Five Hundred Suspension Hardware

Explore our best-selling Ford parts for the 2005 Five Hundred among 1 OEM and aftermarket options starting from $39.49.

show more show less

from

$39.49

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Top-Rated Suspension Parts Brands For Your 2005 Ford Five Hundred

Shop for the best-rated brands offering Suspension Parts and other products for your 2005 Ford Five Hundreds. Below you’ll find some of our best rated Suspension Parts from Valvoline, Moog, and Monroe, and more. Suspension Parts from these brands that fit a 2005 Five Hundred start at just $10.49 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2005 Ford Five Hundred Suspension Parts

When it comes to maintaining or upgrading your 2005 Ford Five Hundred, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 2005 Ford Five Hundred. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$36.49

(446)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

“Good product”

Popular Moog 2005 Ford Five Hundred Suspension Parts

Moog auto parts is one of the highest quality Suspension Part brands in the market. Any 2005 Ford Five Hundred owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2005 Five Hundred, Advance Auto Parts carries a full inventory of 10 Moog Suspension Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Moog Suspension Parts range from $10.49 to $95.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from
$10.49

This product is not rated

Control Arm Bushing

“”

from
$78.99

This product is not rated

Control Arm Bushing

“”

from
$25.99

This product is not rated

Control Arm Bushing

“”

FAQs for 2005 Ford Five Hundred Suspension Parts

Which Suspension Parts are best-sellers for 2005 Ford Five Hundreds?

Out of 76 Suspension Parts that fit 2005 Ford Five Hundreds, the following parts are the top sellers:

Strut-Mate Strut Boot Kit (99985239) – $37.49
Jounce Bumper and Bellows (19170663) – $18.99
Control Arm Bushing (10225701) – $78.99

What’s the price range for 2005 Ford Five Hundred Suspension Parts?

Suspension Part prices for the 2005 Ford Five Hundred start at $6.29 and go up to $489.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2005 Ford Five Hundred?

The average price for Suspension Parts for the 2005 Ford Five Hundred is $139.22. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Ford Five Hundred model years?

Yes, we currently carry Suspension Parts for 2 model years of Ford Five Hundreds between 2006 and 2007. Suspension Parts are bought most frequently for the following model years: 2007 and 2006.

What are the cheapest Suspension Parts for my 2005 Ford Five Hundred?

The cheapest 2005 Ford Five Hundred Suspension Parts we carry in stock are:

Max Performance Synthetic Power Steering Fluid (11150908) – $6.29
Control Arm Bushing (11620184) – $10.49
Trailing Arm Bushing (11620056) – $12.49
Control Arm Bushing (11620066) – $12.99
Control Arm Bushing (12089268) – $16.49

What are the top-rated Suspension Parts that fit the 2005 Ford Five Hundred?

Out of 1,404 reviews by customers, our 2005 Ford Five Hundred Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2005 Ford Five Hundred and their top-rated products:

Control Arms
- Control Arm Bushing (10225579) – $95.99
Shocks and Struts
- Control Arm Bushing (10225579) – $95.99

What types of Suspension Parts do you sell for my 2005 Ford Five Hundred?

As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 2005 Ford Five Hundred:

Can I get help with 2005 Ford Five Hundred Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Suspension Parts and more.

What is your return policy for Ford Five Hundred Suspension Parts?

Advance Auto Parts keeps returns simple. For new Ford Five Hundred Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 Ford Five Hundred Suspension Parts

Monroe – Strut-Mate Strut Mounting Kit (Part No.L3033570025MNR)

KYB – Excel-G Shock Absorber (Part No.L4000340368KYB)

MOOG – Trailing Arm (Part No.RK643537)

MOOG – Trailing Arm Bushing (Part No.K201369)

MOOG – Control Arm Bushing (Part No.K200364)

MOOG – Control Arm Bushing (Part No.K201733)

Dorman – Lateral Control Arm (Part No.L20021224969DOR)

Dorman – Suspension Control Arm (Part No.524-184)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

KYB – Jounce Bumper and Bellows (Part No.SB101)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-818897)

Suncore – Quick Strut Kit (Part No.2-55S11297-001)

Monroe – Strut-Mate Strut Boot Kit (Part No.63631)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920251)

Suncore – Quick Strut (Part No.55S15182)

TRW – Strut Mount (Part No.L3030217033TRW)

KYB – STRUT MOUNT (Part No.L3030440542KYB)

Dorman – Suspension Trailing Arm (Part No.523-277)

Dorman – Suspension Lateral Link (Part No.523-279)

Monroe – Strut-Mate Strut Mounting Kit (Part No.905915)

Suncore – Quick Strut Kit (Part No.2-55S15183-001)

Suncore – Quick Strut Kit (Part No.2-55S15181-001)

Suncore – Quick Strut Kit (Part No.2-55S11293-001)

Dorman – Suspension Trailing Arm Bushing (Part No.523-134)

Suncore – Quick Strut (Part No.55S15182)

Suncore – Quick Strut (Part No.55S15181)

Carquest Premium – Complete Strut Assembly (Part No.18-818201)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.818202)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920252)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920251)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.818898)

Carquest Premium – Complete Strut Assembly 28-710972: Includes Strut, Coil Spring and Mount (Part No.28-710972)

Suncore – Quick Strut (Part No.55S11298)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Monroe – Strut-Mate Strut Mounting Kit (Part No.905915)

Suncore – Quick Strut Kit (Part No.2-55S15183-001)

Suncore – Quick Strut Kit (Part No.2-55S15181-001)

Suncore – Quick Strut Kit (Part No.2-55S11293-001)

Monroe – Strut-Mate Strut Mounting Kit (Part No.L3033570025MNR)

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

KYB – Gas Strut (Part No.341472)

KYB – Jounce Bumper and Bellows (Part No.SB101)

Monroe – Strut-Mate Strut Boot Kit (Part No.63631)

Carquest Premium – Complete Strut Assembly 18-818898: Includes Strut, Coil Spring and Mount (Part No.18-818898)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-818897)

Monroe – OESpectrum Strut (Part No.72539)

Suncore – Quick Strut Kit (Part No.2-55S11297-001)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172612)

KYB – Strut Mount (Part No.SM5604)

Carquest Premium – Complete Strut Assembly (Part No.18-818202)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.818201)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920251)

TRW – Strut Assembly – Twin-tube Design (Part No.L3000217118TRW)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920252)

TRW – Strut Assembly – Twin-tube Design (Part No.L3000217117TRW)

Suncore – Quick Strut (Part No.55S15184)

Suncore – Quick Strut (Part No.55S15183)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.818897)

Rare Parts – STRUT MOUNT (Part No.RP53908)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.710972)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.710971)

Carquest Premium – Complete Strut Assembly 28-710971: Includes Strut, Coil Spring and Mount (Part No.28-710971)

KYB – Excel-G Shock Absorber (Part No.L4000340368KYB)

KYB – Excel-G Strut Assembly (Part No.L3000330205KYB)

KYB – Excel-G Strut Assembly (Part No.L3000330206KYB)

Suncore – Quick Strut (Part No.55S11294)

Suncore – Complete Strut Assem (Part No.55S11293)

Suncore – Quick Strut (Part No.55S11297)

Autopart International Inc – Strut Mount (Part No.L30303157645API)

International Suspension Group – Strut Mount (Part No.L3030399723ISG)

Rare Parts – STRUT MOUNT (Part No.RP53650)

Rare Parts – STRUT MOUNT (Part No.RP53649)

Rare Parts – STRUT MOUNT (Part No.RP53647)

Rare Parts – STRUT MOUNT (Part No.RP53648)

TRW – Strut Mount (Part No.L3030217033TRW)

KYB – STRUT MOUNT (Part No.L3030440542KYB)

KYB – STRUT MOUNT (Part No.L3030440541KYB)

KYB – Strut Mount (Part No.L3030440540KYB)