Name: Fuel Injector Sleeve
Brand: Carquest Premium
SKU: AC20252
Price: 15.29 USD

from

$15.29

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can result in combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

Original equipment fit, form and function

from

$372.99

This complete repair solution allows replacement of the fuel injector harness on the Ford 6.0L Power Stroke engine. The harness connects between the Fuel Injection Control Module (FICM) and fuel injectors. Chafing and damage to the OE harness is common due to improper OE routing and contact with sharp engine components. This can result in an engine misfire or no-start condition or damage to other components in the system. This new harness allows proper routing to eliminate this condition.

Product Features:

Includes all new wiring and connectors
Upgraded harness wrap reduces potential for chafing
Includes technical bulletin and installation tips

from

$664.99

CARQUEST premium Fuel Injection Control Module (FICM) for the Ford Power Stroke 6.0L is completely disassembled and all electronic components are tested. Common failure points in the original design are corrected. All defective components are replaced with upgraded components. The unit is pre-programmed with the latest software available which improves injector operation (NO REFLASH REQUIRED). Each unit is 100% tested under multiple operating conditions prior to shipment. Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.

Product Features:

Each unit is 100% tested to OE specifications
Preprogrammed plug-and-play ready which reduces installation time and cost
Upgraded module prevents common failure modes inherent with OE design
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$531.99

CARQUEST premium Fuel Injection Control Module (FICM) for the Ford Power Stroke 6.0L is completely disassembled and all electronic components are tested. Common failure points in the original design are corrected. All defective components are replaced with upgraded components. The unit is pre-programmed with the latest software available which improves injector operation (NO REFLASH REQUIRED). Each unit is 100% tested under multiple operating conditions prior to shipment. Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.

Product Features:

Each unit is 100% tested to OE specifications
Preprogrammed plug-and-play ready which reduces installation time and cost
Upgraded module prevents common failure modes inherent with OE design
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$9.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$34.49

This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.49

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$29.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$2.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$22.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$8.61

Fuel Injector O-Ring

from

$222.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$145.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$126.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$320.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$482.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Precision-manufactured with the latest engineering enhancements to match the OE injector
Product of OE-production design, development, engineering, and manufacturing processes, including sub-micron machining and complex assembly systems, to ensure durability
Undergoes extensive dynamometer, hot gas test stand, and diesel emissions testing for proper performance
Manufactured in U.S.A. at TS16949-certified facility

from

$771.99

REMAN FUEL INJECTOR

from

$332.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Fuel Injector Assembly consists of a cylindrical housing with an electric solenoid-controlled plunger valve mounted inside
When the solenoid is electrically actuated by the engine control module, the plunger valve opens, allowing fuel to reach the spray head that injects atomized fuel into the cylinder to be mixed with oxygen for combustion.
The resulting explosive air/fuel mixture is compressed by the upward moving piston and ignited by a spark plug or glow plug to power the engine.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into every Motorcraft Fuel Injector Assembly, ensuring the most current technology.
Motorcraft Fuel Injector Assemblies are built to last: corrosion resistant, pressure-tested and engineered to perform under extreme conditions and meet Ford’s exacting OE specifications, performance and quality standards.

from

$322.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Fuel Injector Assembly consists of a cylindrical housing with an electric solenoid-controlled plunger valve mounted inside
When the solenoid is electrically actuated by the engine control module, the plunger valve opens, allowing fuel to reach the spray head that injects atomized fuel into the cylinder to be mixed with oxygen for combustion.
The resulting explosive air/fuel mixture is compressed by the upward moving piston and ignited by a spark plug or glow plug to power the engine.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into every Motorcraft Fuel Injector Assembly, ensuring the most current technology.
Motorcraft Fuel Injector Assemblies are built to last: corrosion resistant, pressure-tested and engineered to perform under extreme conditions and meet Ford’s exacting OE specifications, performance and quality standards.

from

$14.29

Complete injector seal kit includes all seven components necessary to properly reseal injector when installed. All parts in kit are manufactured using premium OE quality materials.

Product Features:

Kit includes top high-pressure oil inlet seal and metal C clip, two injector body O-rings, copper combustion seal and two electrical plug seals
Premium OE quality materials
Services one injector

from

$10.29

The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$8.29

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$9.99

The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$41.49

This complete repair solution allows repair and upgrade of the fuel pressure regulator. The updated spring increases factory fuel pressure which improves injector operation and longevity. Low fuel pressure on the 6.0L Power Stroke can result in loss of power under full load and premature injector failure.

Product Features:

Includes updated spring
Includes housing seal and fitting O-ring
Includes technical bulletin and installation instructions

from

$81.99

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Complete kit comes with everything needed to rebuild the fuel filter housing after a weakened stock spring causes hard starting, stalling, poor fuel mileage, and poor acceleration
Includes fuel pressure regulator, gasket, O-rings, and hardware for ease of installation
Once installed, the new fuel pressure regulator will Increase fuel pressure by 10-15 PSI, maximizing performance and injector life
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$318.99

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

Original equipment fit, form and function
Manufactured to precise OE performance specifications
O-ring seals included and installed on new IPR valve

from

$38.99

This fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$231.99

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features: