2005 Dodge Ram 3500 Pickup Differential Axle Shafts

Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• Fits 2003-2009 Chrysler 9.25″ front
• 4340 Chromoly
• Right hand inner
• 38.1″ long

Yukon rear axle for Chrysler 10.5″ & 11.5″ (’03 and newer Dodge) with a length of 36 13/16″ and 30 splines. Yukon alloy axles come with a one year warranty against manufacturing defects. This is a full-floating axle.

Product Features:

• 30 spline
• 36 3/16″ long
• Fits Chrylser 11.5″

Yukon right hand front axle assembly for ’03-’08 Chrysler 9.25″ front. Yukon axles come with a one year warranty against manufacturing defects. This assembly uses a 1485 u/joint.

Product Features:

• 33 spline inner
• 45.5″ long
• Fits 2003-2008 Chrysler 9.25″ front
• Right hand side
• Complete assembly

Yukon left hand front axle assembly for ’03-’08 Chrysler 9.25″ front. Yukon axles come with a one year warranty against manufacturing defects. This assembly uses a 1485 u/joint.

Product Features:

• 33 spline inner
• 27.0″ long
• Fits 2003-2008 Chrysler 9.25″ front
• Right hand side
• Complete assembly

Yukon right hand inner axle for ’03-’09 Chrysler 9.25″ front. This axle uses a 1485 u/joint.

Product Features:

• 33 spline
• 38.1″ long
• Fits 2003-2009 Chrysler 9.25″ front
• Right hand side

Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Dana U/joints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• 33 spline
• Fits 2003-2008 Chrysler 9.25″ front
• Includes inner and outer 4340 Chromoly axles and Spicer U-Joints

Axle shaft damaged or bearings worn out? This axle shaft assembly directly replaces the original equipment on certain vehicles, ready for install right out of the box..

Product Features:

• Direct replacement – this axle shaft assembly replaces the original equipment on specific vehicle years, makes and models.
• Ready to install – comes pre-assembled for simple installation with no further assembly required
• Durable construction – designed to rigorous standards and tested to ensure performance
• Trustworthy solution – backed by team of engineers and quality control specialists in the United States

4340 Chrome Moly axle shaft for Chrysler 10.5″ & 11.5″ rear. This is a cut to length axle which fits 36.1″ to 40.1″ lengths with 38 splines. Yukon 4340 Chrome Moly alloy axles offer a strength increase over stock while retaining a low cost. Yukon 4340 Chrome Moly alloy rear axles come with a limited lifetime warranty against manufacturing defects. The factory spindles will need to be machined in order to accept these axles.

Product Features:

• 38 spline
• 8 lug
• Cut to length design fits 36.1″-40.1″ applications
• Fits Chrysler 10.5″ and 11.5″
• 4340 Chromoly

38 spline upgraded cut to length axle for 10.5″ & 11.5″ Dodge rear. This cut to length axle will accomodate applications from 36.4″ to 40.1″. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects. The factory spindles will need to be machined in order to accept these axles.

Product Features:

• 38 spline
• Cut to length design fits 36.4″-40.1″ applications
• Fits Chrysler 11.5″

Yukon left hand inner axle for ’03-’09 Chrysler 9.25″ front. This axle uses a 1485 u/joint.

Product Features:

• 33 spline
• 19.6″ long
• Fits 2003-2009 Chrysler 9.25″ front
• Left hand side

Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• Fits 2003-2009 Chrysler 9.25″ front
• 4340 Chromoly
• Includes 4 springs and 4 alignment pins
• 19.6″ long

Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.