2005 Dodge Ram 2500 Drive Shafts and Axles
More 2005 Dodge Ram 2500 Drive Shafts and Axles
Find your specific 2005 Dodge Ram 2500 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2005 Dodge Ram 2500 Drive Shafts and Axles
Driveworks – Ball Bearing (Part No.S-HB-88107-A)
National – Multi Purpose Bearing (Part No.HB-88530)
from
$144.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Axle Flange Gasket Kit (Part No.926-966)
from
$21.49
Ensure a leak-free repair when servicing axle bearings or parking brake shoes. This axle shaft flange seal is a direct replacement for the original gasket and should be replaced every time work is performed at the axle flange.
Product Features:
See More
Product Features:
- Ideal replacement – this axle shaft flange seal directly replaces the original gasket without having to visit the dealer
- Required for routine service – this gasket should be replaced every time work is performed at the axle flange
- Durable construction – this axle shaft flange gasket is made of tough, durable materials for leak-free performance
- Quality tested – this flange gasket has been designed and tested for a guaranteed fit
Crown Auto Jeep Replacmnt – Black (Part No.52070427AB)
from
$11.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Yukon Gear – Outer Stub Dust Shield For Chrysler 9.25" Front (Part No.33544)
National – Multi Purpose Seal (Part No.710566)
from
$22.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal Replacement (Part No.30122)
from
$13.99
Inner front disco replacement seal for 4WD Dana 44, Dana 60, and 8.5″ straight axle.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner front axle seal
- Fits Dodge disconnect front with Dana Spicer 44 or 60, reverse rotation Dana Spicer 44 and GM 8.5″
Dorman – Rear Axle Differential Vent (Part No.924-263)
from
$9.99
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
- Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Spicer – U-Joint Kit (Part No.5006813)
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-159)
from
$1019.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-151)
from
$914.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-579)
from
$1297.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6065)
from
$96.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to DODGE 94-03;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1994-2003
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- INVERTED THREADED HOLE MOUNT
- THREADS: 7/16 – 14
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6079)
from
$78.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 92-05; DODGE 84-10; GMC 92-05; RAM 11-20;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1984-2020
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: SQUARE FRAME
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6071)
from
$92.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 02-06; CHEV 97-12; DODGE 03-06; FORD 11-15; GMC 96-12; NISSAN 04-22;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1996-2022
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- WITHOUT PLATE
- WITHOUT STUDS
- EXTENDED DUST SHIELD
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.307-FFL5)
from
$77.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Stub Axle (Part No.21838)
from
$244.99
Stub Axle
Yukon Gear – Stub Axle (Part No.21782)
from
$356.99
Stub Axle
Yukon Gear – Outer Stub Axle For Chrysler 9.25" Front (Part No.21774)
from
$254.99
Yukon outer stub axle for Chrysler 9.25″ front. This axle uses a 1485 u/joint and has 33 splines.
Product Features:
See More
Product Features:
- 33 spline
- 7.40″ long
- Fits 2003-2008 Chrysler 9.25″ front
- Outer stub
National – Multi Purpose Seal (Part No.714655)
from
$6.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.4638N)
from
$4.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)
from
$145.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44
- 26 spline
- 1330 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.062″ cap diameter
- Strap style
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41024)
from
$187.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.0625″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a strap style yoke.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1330 u-joint size
- 3.625″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – Round Replacement Yoke Companion Flange For Dana 80 (Part No.41036)
from
$369.99
Round replacement yoke companion flange for Dana 80. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 37 spline
- Round companion flange
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Popular 2005 Dodge Ram 2500 Drive Shafts and Axles Categories
2005 Dodge Ram 2500 Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 2005 Dodge Ram 2500. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 56 different Drive Shafts and Axles in our inventory ranging from $3.99 to $2,345.99. That means you can find the exact parts or products you need to keep that 2005 Dodge Ram 2500 running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 2005 Dodge Ram 2500. Spicer, Anchor, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 2005 Dodge Ram 2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 198 reviews in this category, some of the top rated parts include Center Support Bearing Motor Mount: Center, 1 Piece with 5.0 stars and National Driveshaft Center Support Bearing with 4.0 stars.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2005 Dodge Ram 2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 2005 Dodge Ram 2500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 Dodge Ram 2500 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Ram 2500 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Dorman Drive Shafts and Axles
We carry Dorman parts in our stock across Axle Vents categories, plus more. For a 2005 Dodge Ram 2500, our most popular Dorman Drive Shafts and Axles include:
Top 2005 Dodge Ram 2500 Drive Shafts and Axles from Spicer
Spicer products are another trusted brand when it comes to Drive Shafts and Axles for your 2005 Dodge Ram 2500. Popular Spicer parts include:
FAQs for 2005 Dodge Ram 2500 Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 2005 Dodge Ram 2500?
Out of 56 Drive Shafts and Axles for the 2005 Dodge Ram 2500, the most popular in our inventory are:
What are the top-rated 2005 Dodge Ram 2500 Drive Shafts and Axles?
Top-rated Drive Shafts and Axles for your 2005 Dodge Ram 2500 based on customer reviews/ratings are:
