2005 Chevrolet Trailblazer Ext Transmission Parts

Popular 2005 Chevrolet Trailblazer Ext Transmission Parts Categories

Essential Transmission Parts for 2005 Chevrolet Trailblazer Exts

ATP – AUTO TRANS BAND (Part No.CX-42)

AUTO TRANS BAND

from

$33.99
AUTO TRANS BAND

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

NTK – ABS Wheel Speed Sensor (Part No.VB0037)

ABS Wheel Speed Sensor

from

$34.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK ABS Wheel Speed Sensor connectors, mounts and wire lengths are an exact match to OE for worry free installation. Grease, mounting nut and instruction sheet included where applicable.
  • NTK’s Wheel Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function. Manufactured with weather pack connectors to prevent dirt and moisture contamination.
  • The ABS ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up.
See More

Dorman – Help – Torque Convertor Bolts (Part No.14099)

Torque Convertor Bolts

from

$9.49
This torque converter hardware is designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this torque converter hardware is designed to match the fit and function of the original hardware on specified vehicles
  • Ideal solution – this hardware is a reliable replacement for original hardware that has failed due to fatigue
  • Durable construction – this hardware is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260202)

4L60E Automatic Transmission Assembly

from

$1977.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

ACDelco – Speedometer Sensor (Part No.P4018191712ACD)

Speedometer Sensor

from

$44.59
Speedometer Sensor

Driveworks – Tapered Roller Bearing (Part No.S-M-802011)

Tapered Roller Bearing

from

$10.49
Product Features:
  • Brand may vary by location
See More

ATP – Shift Solenoid (Part No.CE-14)

Shift Solenoid

from

$52.99
Shift Solenoid

ACDelco – AT Cooling Pipe (Part No.J2002576937ACD)

AT Cooling Pipe

from

$42.16
AT Cooling Pipe

Pro-King – Automatic Transmission Solenoid (Part No.52-0203)

Automatic Transmission Solenoid

from

$34.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:
  • Quick Link Splice Connectors
See More

FAG US – CONE (Part No.KM88048)

CONE

from

$19.49
CONE

Carquest Premium – Back Up Light Switch (Part No.NSE1016)

Back Up Light Switch

from

$81.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Help – Transmission Oil Dipstick: Direct Replacement, Steel (Part No.917-301)

Transmission Oil Dipstick: Direct Replacement, Steel

from

$21.49
This automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles.
  • Restores functionality – reliable replacement for an original dipstick that has bent or broken due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Repair Harness (Part No.PTC1522)

Repair Harness

from

$109.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

National – Bearings (Part No.A-18)

Bearings

from

$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Imperial – Transmission Line Fitting Kit (Part No.240390)

Transmission Line Fitting Kit

from

$14.79
Product Features:
  • Transmission line fitting kit
  • GM, Jeep; 5/8″-18 inverted flare
  • Helps simplify transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
  • Crafted from high-quality material that makes it durable and longer-lasting
  • A high quality, direct fit OE replacement
  • Easily connects the transmission cooler line to the cooler hose
  • Coated for extra protection against corrosion
See More

National – Multi Purpose Seal (Part No.8792S)

Multi Purpose Seal

from

$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Anchor – Transmission Mount: Rear, 1 Piece (Part No.3236)

Transmission Mount: Rear, 1 Piece

from

$71.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 04-07; CHEV 03-09; GMC 03-09; ISUZU 03-05; SAAB 05-09;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2003-2009
  • Weight approx: 4 Lbs
See More

ATP – AT PRESS SW MANIFOLD (Part No.JE-9)

AT PRESS SW MANIFOLD

from

$79.99
AT PRESS SW MANIFOLD

SKF – Trans Case Output Sf (Part No.J7121222704SKF)

Trans Case Output Sf

from

$70.36
Trans Case Output Sf

Pro-King – Automatic Transmission Deluxe Rebuild Kit (Part No.KS-112A)

Automatic Transmission Deluxe Rebuild Kit

from

$393.99
One of the most complete rebuild kits in the automatic transmission industry today. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:
  • Include steels, frictions, gaskets, and filter
  • Includes Band and Modulator (if applicable)
See More

Mahle – Oil Dipstick Seal (Part No.A1120666332MAH)

Oil Dipstick Seal

from

$2.62
Oil Dipstick Seal

ARP Auto Racing – For Use With Gen Iii/ Ls Series Chevy Small Block, 0.880" Under Head L (Part No.244-2901)

For Use With Gen Iii/ Ls Series Chevy Small Block, 0.880" Under Head L

from

$30.99
Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating. Complete with washers and nuts where applicable.

Product Features:
  • Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
  • Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter
  • Flanged Nut
  • Increased Strength And Improved Flywheel Register
  • 0.88″ Underhead Length
  • Set of 6
  • 200,000 PSI
  • 1-PC Rear Main
See More

National – Multi Purpose Seal (Part No.4583)

Multi Purpose Seal

from

$12.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

ACDelco – Shift Interlock Sole (Part No.J4081587082ACD)

Shift Interlock Sole

from

$205.86
Shift Interlock Sole

ACDelco – Black Multi-Purpose Relay (Part No.D1780C)

Black Multi-Purpose Relay

from

$16.49
ACDelco GM Original Equipment Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1078)

ABS Wheel Speed Sensor Connector

from

$27.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Upgrade your 2005 Chevrolet Trailblazer Ext with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2005 Chevrolet Trailblazer Ext, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Transmission Parts are key to keeping your Trailblazer Ext functioning at its best. At Advance Auto Parts, we offer a wide selection of 142 Transmission Parts for the 2005 Chevrolet Trailblazer Ext, designed to meet your needs without breaking the bank. From Transmission Cooler and Part replacements to Automatic Transmission Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2005 Chevrolet Trailblazer Ext at great prices. Our Transmission Parts inventory for this model ranges from just $2.49 to $2,482.99, with an average price of $220.37. Our 142 Transmission Parts in stock come from 28 trusted brands, so you’re sure to find the right part for your 2005 Chevrolet Trailblazer Ext without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Chevrolet Trailblazer Ext, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex, Dorman, Imperial, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. Dorman and Imperial also bring quality to the table, with Transmission Parts available starting at $8.99, and at an average 4 stars rating. With 2,156 customer reviews and counting, our 2005 Chevrolet Trailblazer Ext Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Chevrolet Trailblazer Ext is always ready to roll. We’re committed to providing you with everything you need to keep your Trailblazer Ext in top shape, all in one place. Start shopping confidently below for your 2005 Chevrolet Trailblazer Ext!

Best-Selling Transmission Cooler and Parts for 2005 Chevrolet Trailblazer Exts

Enhance the driving experience in your Chevrolet with 17 quality Transmission Cooler and Part components, starting at $30.99.

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-956)

Transmission Oil Cooler Line: Exact Fit, Metal

from

$30.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:
  • Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
  • Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-954)

Transmission Oil Cooler Line: Exact Fit, Metal

from

$40.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:
  • Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
  • Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

High Performance Transmission Oil Cooler

from

$85.99
Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 10″ x 15-7/8″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-955)

Transmission Oil Cooler Line: Exact Fit, Metal

from

$35.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:
  • Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
  • Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Maxi-Kool® XL Transmission Oil Cooler

from

$73.99
The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:
  • Imperial Maxi-Cool® plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 7-1/2″
  • Mid-size and full-size cars, pickups
  • GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
See More

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty

from

$59.99
Product Features:
  • Imperial Rapid-Cool« plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 6″
  • Sub-compact to compact cars
  • GVWR up to 18,000 lbs.
  • Compatible with OEM cooler systems
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Econo-Kool® Transmission Oil Cooler

from

$54.99
Product Features:
  • Imperial Econo-Kool« tube and fin transmission cooler
  • Size: 3/4″ x 5″ x 15-7/8″
  • Compact and mid-size cars
  • GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Econo-Kool® Transmission Oil Cooler

from

$39.99
Product Features:
  • Imperial Econo-Kool« tube and fin transmission cooler
  • Size: 3/4″ x 5″ x 12-1/2″
  • Sub-compact to compact cars
  • GVWR up to 12,000 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty

from

$80.99
Product Features:
  • Imperial Rapid-Cool« plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 9-1/2″
  • Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
  • GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
  • 33% more efficient than a comparable tube and fin design
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Econo-Kool® Transmission Oil Cooler

from

$52.99
Product Features:
  • Mid-size and full-size cars, pickups
  • GVWR up to 18,000 lbs.; towing up to 3,500 lbs
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

High Performance Transmission Oil Cooler

from

$81.99
High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 15-7/8″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
See More

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-953)

Transmission Oil Cooler Line: Exact Fit, Metal

from

$45.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:
  • Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
  • Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

High Performance Transmission Oil Cooler

from

$67.99
Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 12-1/2″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

Dorman – AT Oil Cooler Hose A (Part No.J2068720021DOR)

AT Oil Cooler Hose A

from

$43.39
AT Oil Cooler Hose A

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-560)

Transmission Oil Cooler Line: Exact Fit, Metal

from

$44.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:
  • Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
  • Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – AT Cooling Pipe (Part No.J2002576938ACD)

AT Cooling Pipe

from

$52.19
AT Cooling Pipe

ACDelco – AT Cooling Pipe (Part No.J2002576937ACD)

AT Cooling Pipe

from

$42.16
AT Cooling Pipe

Most Popular 2005 Chevrolet Trailblazer Ext Automatic Transmission Parts

Customize your Chevrolet with 33 Automatic Transmission Parts products like Automatic Transmission Shift Linkage Bushings, Transmission Solenoids, and Transmission Dipsticks, all priced under $2,482.99.

ATP – Shift Solenoid (Part No.CE-14)

Shift Solenoid

from

$52.99
Shift Solenoid

Pro-King – Automatic Transmission Solenoid (Part No.52-0214)

Automatic Transmission Solenoid

from

$34.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:
  • OE Replacement
See More

Dorman – Help – Transmission Shift Cable Bushings (Part No.14057)

Transmission Shift Cable Bushings

from

$18.29
Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This 4-piece assortment of Dorman OE FIX shift cable replacement bushings saves expense by allowing the replacement of just the failed bushing.

Product Features:
  • Convenient solution – this shift cable bushing assortment directly replaces a broken bushing and eliminates the need to replace the entire cable assembly.
  • Save time and money – save the expense and significant installation time of replacing an entire cable assembly
  • Ensure fit – this bushing assortment is vehicle-specific and precision-engineered for specified General Motors, Chrysler and Saab models and years
  • Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
See More

Dorman – Help – Shift Linkage Bushing (Part No.14055)

Shift Linkage Bushing

from

$16.49
Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This 2-piece assortment of Dorman OE FIX bushings saves expense by allowing the replacement of just the failed bushing.

Product Features:
  • Convenient solution – this shift cable bushing assortment directly replaces a broken bushing and eliminates the need to replace the entire cable assembly.
  • Save time and money – save the expense and significant installation time of replacing an entire cable assembly
  • Ensure fit – this bushing assortment is vehicle-specific and precision-engineered for specified General Motors, Chrysler and Saab models and years
  • Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
See More

Dorman – Help – Transmission Oil Dipstick: Direct Replacement, Steel (Part No.917-301)

Transmission Oil Dipstick: Direct Replacement, Steel

from

$21.49
This automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles.
  • Restores functionality – reliable replacement for an original dipstick that has bent or broken due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Moveras – 4L60E – Automatic Transmission (Part No.M00646)

4L60E - Automatic Transmission

from

$1744.99
While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:
  • Product might not be available in all states due to local laws.
See More

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBA4928)

Automatic Transmission Control Solenoid

from

$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ATP – AUTO TRANS BAND (Part No.CX-42)

AUTO TRANS BAND

from

$33.99
AUTO TRANS BAND

ATP – ATHARNESS VSS REPR (Part No.CE-9)

ATHARNESS VSS REPR

from

$202.99
ATHARNESS VSS REPR

ACDelco – Automatic Transmission Solenoid (Part No.J4006209907ACD)

Automatic Transmission Solenoid

from

$82.39
ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda. ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and After sales, a division of General Motors.
See More

Vemo – AT Kickdown Solenoid (Part No.J4005209874VMO)

AT Kickdown Solenoid

from

$54.96
AT Kickdown Solenoid

ACDelco – 6-Way Female Black Multi-Purpose Pigtail (Part No.PT392)

6-Way Female Black Multi-Purpose Pigtail

from

$37.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ATP – ATHARNESS VSS REPR (Part No.JE-24)

ATHARNESS VSS REPR

from

$119.99
ATHARNESS VSS REPR

Premium Drive Train – Automatic Transmission Assembly (Part No.T4L60E4803T2)

Automatic Transmission Assembly

from

$2482.99
(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:
  • All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
  • 100% of friction components are replaced with upgraded heavy duty parts.
  • Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
  • 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
  • Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
  • Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
  • 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
  • Product might not be available in all states due to local laws.
See More

Premium Drive Train – Automatic Transmission Assembly (Part No.T4L60E4803T4)

Automatic Transmission Assembly

from

$2482.99
All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). [Torque Converter] All of converters are dynamic balanced All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked

Product Features:
  • All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
  • 100% of friction components are replaced with upgraded heavy duty parts.
  • Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
  • 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected
  • Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
  • Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
  • 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
  • Product might not be available in all states due to local laws.
See More

Spartan – Automatic Transmission Assembly; GM RWD 4L60E 4-Speed (Part No.7204-JC)

Automatic Transmission Assembly; GM RWD 4L60E 4-Speed

from

$2282.00
Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.

Product Features:
  • Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
  • If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
  • Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.
See More

Spartan – Automatic Transmission Assembly; GM AWD 4L60E 4-Speed (Part No.7205-JC)

Automatic Transmission Assembly; GM AWD 4L60E 4-Speed

from

$2217.00
Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.

Product Features:
  • Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
  • If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
  • Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.
See More

Spartan – Automatic Transmission Assembly; GM RWD 4L60E 4-Speed (Part No.7204-MB)

Automatic Transmission Assembly; GM RWD 4L60E 4-Speed

from

$2020.00
Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.

Product Features:
  • Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
  • If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
  • Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.
See More

Premium Drive Train – Automatic Transmission Assembly (Part No.T4L60E4202TB4)

Automatic Transmission Assembly

from

$1995.99
(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:
  • All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
  • 100% of friction components are replaced with upgraded heavy duty parts.
  • Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
  • 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
  • Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
  • Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
  • 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
  • Product might not be available in all states due to local laws.
See More

Premium Drive Train – Automatic Transmission Assembly (Part No.T4L60E4202TB2)

Automatic Transmission Assembly

from

$1995.99
(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:
  • All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
  • 100% of friction components are replaced with upgraded heavy duty parts.
  • Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
  • 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
  • Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
  • Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
  • 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
  • Product might not be available in all states due to local laws.
See More

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260042)

4L60E Automatic Transmission Assembly

from

$1977.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260074)

4L60E Automatic Transmission Assembly

from

$1949.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Moveras – 4L60E – Automatic Transmission (Part No.M00216)

4L60E - Automatic Transmission

from

$1949.99
While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:
  • Product might not be available in all states due to local laws.
See More

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260035)

4L60E Automatic Transmission Assembly

from

$1949.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260059)

4L60E Automatic Transmission Assembly

from

$1919.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Moveras – 4L60E – Automatic Transmission (Part No.M01569)

4L60E - Automatic Transmission

from

$1719.99
Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:
  • Product might not be available in all states due to local laws.
  • We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
  • Each Moveras transmission is produced in a World Class manufacturing facility
  • Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
  • Our transmissions are produced in a Clean Room environment
  • Every transmission is built to the same exacting stAndards by using a precisely documented And controlled process.
See More

ACDelco – Shift Interlock Sole (Part No.J4081587082ACD)

Shift Interlock Sole

from

$205.86
Shift Interlock Sole

Carquest Premium – Premium Shift Interlock Solenoid TCA2052 (Part No.TCA2052)

Premium Shift Interlock Solenoid TCA2052

from

$142.99
Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Product Features:
  • Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness
See More

Dorman – Shift Interlock Sole (Part No.J40811317355DOR)

Shift Interlock Sole

from

$135.00
Shift Interlock Sole

ATP – AT CONTR SOLENOID (Part No.CE-15)

AT CONTR SOLENOID

from

$47.99
AT CONTR SOLENOID

Carquest Premium – Automatic Transmission Pressure Control Solenoid (Part No.TCA1008)

Automatic Transmission Pressure Control Solenoid

from

$36.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCA1171)

Automatic Transmission Control Solenoid

from

$35.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – AT Shift Solenoid (Part No.J4006209918ACD)

AT Shift Solenoid

from

$25.16
AT Shift Solenoid

Top Picks for 2005 Chevrolet Trailblazer Ext Transmission Seals

Upgrade Chevrolet Trailblazer Exts with top-quality Transmission Seals parts, including 14 OEM and aftermarket selections for your 2005 model.

National – Multi Purpose Seal (Part No.4934)

Multi Purpose Seal

from

$14.79
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -20°F to 300°F / -29°C to 49°C
  • Resistance to EP lubricants
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.4583)

Multi Purpose Seal

from

$12.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.710687)

Multi Purpose Seal

from

$26.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.8792S)

Multi Purpose Seal

from

$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.710688)

Multi Purpose Seal

from

$30.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Auto Transmission Output Shaft Seal (Part No.S-4934)

Auto Transmission Output Shaft Seal

from

$8.49
Product Features:
  • Brand may vary by location
See More

Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)

Auto Transmission Shift Shaft Seal

from

$2.49
Product Features:
  • Brand may vary by location
See More

SKF – Trans Case Output Sf (Part No.J7121222704SKF)

Trans Case Output Sf

from

$70.36
Trans Case Output Sf

SKF – Pinion Seal (Part No.J7010211703SKF)

Pinion Seal

from

$23.26
Pinion Seal

Timken – AT Extension Housing (Part No.J50711175902TIM)

AT Extension Housing

from

$15.65
AT Extension Housing

SKF – AT Pump Seal (Part No.J5073366502SKF)

AT Pump Seal

from

$12.32
AT Pump Seal

ACDelco – AT Output Shaft Seal (Part No.J2557626265ACD)

AT Output Shaft Seal

from

$12.25
AT Output Shaft Seal

FAG US – SHAFT SEAL (Part No.SS2114)

SHAFT SEAL

from

$7.49
SHAFT SEAL

Mahle – Oil Dipstick Seal (Part No.A1120666332MAH)

Oil Dipstick Seal

from

$2.62
Oil Dipstick Seal

In-Demand Automatic Transmission Pan and Gaskets for 2005 Chevrolet Trailblazer Exts

Select from 10 premium Automatic Transmission Pan and Gaskets parts for your 2005 Chevrolet Trailblazer Ext, with prices ranging from $6.99 to $349.99.

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18663)

Transmission Oil Pan Gasket

from

$10.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Transmission Oil Pan: Direct Fit, Steel, 12 Quart (Part No.265-811)

Transmission Oil Pan: Direct Fit, Steel, 12 Quart

from

$54.99
This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:
  • Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
  • Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on testing to ensure a quality fit
See More

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

from

$16.99
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 90 minutes
See More

ATP – AT OIL PAN GASKET (Part No.SG-30)

AT OIL PAN GASKET

from

$13.99
AT OIL PAN GASKET

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Ultra Grey RTV Gasket Maker (9.5 oz.)

from

$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:
  • Designed specially for high-torque and high vibration applications
  • Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
  • OEM specified
  • Low-odor, non-corrosive formula
  • Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
See More

B & M – Transmission Pan, Cast Deep Pan 4L60 and 4L60E (Part No.70260)

Transmission Pan, Cast Deep Pan 4L60 and 4L60E

from

$349.99
B&M Cast Aluminum Transmission Pans are constructed of thick A356.0-T6 cast aluminum. Designed to fit a wide range of cars and trucks with TH700-R4, 4L60, 4L60E & 4L65E transmissions, these deep pans significantly increase the fluid capacity and dissipate heat much faster to prolong the life of the transmission and related components. Additional features include an engraved B&M logo, drain port, a magnetic drain plug for catching ferrous metal particles, and complete hardware and installation instructions.

Product Features:
  • Additional Oil Capacity
  • More Cooling Ability
  • No Dipstick Modification
  • Some Include Fluid Pickup Extension
  • Built-In Drain Plugs
  • Cast Aluminum
See More

Most Sold 2005 Chevrolet Trailblazer Ext Transmission Mounts

Explore our best-selling Chevrolet parts for the 2005 Trailblazer Ext among 2 OEM and aftermarket options starting from $71.99.

Anchor – Transmission Mount: Rear, 1 Piece (Part No.3027)

Transmission Mount: Rear, 1 Piece

from

$72.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 04-07; CHEV 02-09; GMC 02-09; ISUZU 03-07; OLDS 02-04; SAAB 05-09;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2002-2009
  • Weight approx: 4 Lbs
  • PART GROUP: 3021, 3021, 3027
See More

Anchor – Transmission Mount: Rear, 1 Piece (Part No.3236)

Transmission Mount: Rear, 1 Piece

from

$71.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 04-07; CHEV 03-09; GMC 03-09; ISUZU 03-05; SAAB 05-09;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2003-2009
  • Weight approx: 4 Lbs
See More

Top-Rated Transmission Parts Brands For Your 2005 Chevrolet Trailblazer Ext

Shop for the best-rated brands offering Transmission Parts and other products for your 2005 Chevrolet Trailblazer Exts. Below you’ll find some of our best rated Transmission Parts from Permatex, Dorman, and Imperial, and more. Transmission Parts from these brands that fit a 2005 Trailblazer Ext start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2005 Chevrolet Trailblazer Ext Transmission Parts

When it comes to maintaining or upgrading your 2005 Chevrolet Trailblazer Ext, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 2005 Chevrolet Trailblazer Ext. With over 6 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $19.49. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Ultra Grey RTV Gasket Maker (9.5 oz.)
from
$32.99
This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge
from
$28.49
This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ
from
$16.99
This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

Popular Dorman 2005 Chevrolet Trailblazer Ext Transmission Parts

Dorman auto parts is one of the highest quality Transmission Part brands in the market. Any 2005 Chevrolet Trailblazer Ext owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2005 Trailblazer Ext, Advance Auto Parts carries a full inventory of 16 Dorman Transmission Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dorman Transmission Parts range from $8.99 to $135.00, plus, with more than 156 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

Torque Convertor Bolts
from
$9.49
This product is not rated

Torque Convertor Bolts

“”

Transmission Connector M18x1.5
from
$21.99
This product is not rated

Transmission Connector M18x1.5

“”

Gearshift Control Cable Assembly
from
$97.99
This product is not rated

Gearshift Control Cable Assembly

“”

FAQs for 2005 Chevrolet Trailblazer Ext Transmission Parts

Which Transmission Parts are best-sellers for 2005 Chevrolet Trailblazer Exts?

Out of 142 Transmission Parts that fit 2005 Chevrolet Trailblazer Exts, the following parts are the top sellers:

What’s the price range for 2005 Chevrolet Trailblazer Ext Transmission Parts?

Transmission Part prices for the 2005 Chevrolet Trailblazer Ext start at $2.49 and go up to $2,482.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2005 Chevrolet Trailblazer Ext?

The average price for Transmission Parts for the 2005 Chevrolet Trailblazer Ext is $220.37. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Chevrolet Trailblazer Ext model years?

Yes, we currently carry Transmission Parts for 4 model years of Chevrolet Trailblazer Exts between 2002 and 2006. Transmission Parts are bought most frequently for the following model years: 2006, 2004, 2003, and 2002.

What are the cheapest Transmission Parts for my 2005 Chevrolet Trailblazer Ext?

The cheapest 2005 Chevrolet Trailblazer Ext Transmission Parts we carry in stock are:

What are the top-rated Transmission Parts that fit the 2005 Chevrolet Trailblazer Ext?

Out of 2,156 reviews by customers, our 2005 Chevrolet Trailblazer Ext Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2005 Chevrolet Trailblazer Ext and their top-rated products:

What types of Transmission Parts do you sell for my 2005 Chevrolet Trailblazer Ext?

Can I get help with 2005 Chevrolet Trailblazer Ext Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Transmission Parts and more.

What is your return policy for Chevrolet Trailblazer Ext Transmission Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Trailblazer Ext Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.