2005 Chevrolet Express 3500 Differentials

Essential 2005 Chevrolet Express 3500 Differentials

Yukon Gear – Minor Install Kit For Dana 80 Differential (4.125" O.D – Pinion Race) (Part No.12030)

Minor Install Kit For Dana 80 Differential (4.125" O.D - Pinion Race)

from

$188.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
  • Included are a pinion seal, complete shim kit, marking compound and brush.
See More

Yukon Gear – Set Up Bearing (Part No.56039)

Set Up Bearing

from

$276.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 60
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Replacement Yoke For Dana 80 With A 1410 U/Joint Size (Part No.41034)

Replacement Yoke For Dana 80 With A 1410 U/Joint Size

from

$334.99
Yukon replacement yoke for Dana 80 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 80
  • 37 spline
  • 1410 u-joint size
  • 4.188″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Side Gear Thrust Washer For Dana 60, 70 & 80

from

$4.99
Product Features:
  • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
  • Fits standard open differentials only
See More

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Drive Shaft Pinion Yoke

from

$117.99


Product Features:
  • PINION YOKE
  • CAST:1310
  • U-BOLT STYLE
See More

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 70 And 80 With 35 Spline Axles, XHD Design (Part No.16181)

Replacement Standard Open Spider Gear Kit For Dana 70 And 80 With 35 Spline Axles, XHD Design

from

$289.99
Yukon replacement standard open spider gear kit for Dana 70 and 80 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
See More

Yukon Gear – Differential Cover B (Part No.33572)

Differential Cover B

from

$7.99
Differential Cover B

Pro-King – Differential Pinion Gear Washer (Part No.744A216)

Differential Pinion Gear Washer

from

$3.19
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

from

$5.99
Product Features:
  • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Bearing Install Kit For ’98-’13R GM 9.5" Differential (Part No.11075)

Bearing Install Kit For '98-'13R GM 9.5" Differential

from

$389.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits 1998 and up GM 9.5″
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
See More

Driveworks – Tapered Roller Bearing (Part No.S-3984)

Tapered Roller Bearing

from

$23.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Replacement Baffle For Dana 70 & 70HD (Part No.33003)

Replacement Baffle For Dana 70 & 70HD

from

$7.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 70 and 70HD
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

Yukon Gear – Bearing Race Driver (Part No.56012)

Bearing Race Driver

from

$215.99
Bearing race driver for rear GM 9.5″, 9.25″ IFS, and Ford 9″ HD. (TK HM804810). No return.

Product Features:
  • Bearing race driver
  • Fits HM804810 race
  • All steel construction
See More

Felpro – Differential Cover Gasket (Part No.RDS 55478)

Differential Cover Gasket

from

$13.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

USA Standard Gear – Replacement Standard Spider Gear Set For Dana 70, 35 Spline (Part No.39011)

Replacement Standard Spider Gear Set For Dana 70, 35 Spline

from

$249.99
Product Features:
  • Spider gear kit
  • Fit Dana Spicer 70 and 80 open differential with 35 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)

Extra-Large Clamshells For Large Applciations

from

$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.

Product Features:
  • Extra Large clamshell
  • Fits carrier bearing puller
See More

Motive Gear – Differential Carrier (Part No.6258340)

Differential Carrier

from

$205.99


Product Features:
  • GM10.5″ 14 BOLT OPEN EMPTY CASE 4:56 & UP
See More

Yukon Gear – Replacement Crush Sleeve For Dana 60 (Part No.33089)

Replacement Crush Sleeve For Dana 60

from

$8.99
Replacement crush sleeve for Dana 60, APROX 0.660″ long.

Product Features:
  • Crush sleeve for Dana Spicer 60
  • 0.660″ tall
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Dana 80 Tracloc Clutch Set Round Design (Part No.16157)

Dana 80 Tracloc Clutch Set Round Design

from

$502.99
Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).

Product Features:
  • Clutch kit
  • Fit Dana Spicer 80 Trac Loc positraction
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down (Part No.20049)

Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down

from

$529.99
Yukon replacement standard open carrier case for Dana 80, 3.73 & down, (incl ABS) 35 & 37 spline.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 80
  • 3.73 and down ratio only
  • Does not include spider gears
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Pinion Install Kit For Dana 80 Differential (4.125" OD Only) (Part No.13036)

Pinion Install Kit For Dana 80 Differential (4.125" OD Only)

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

2005 Chevrolet Express 3500 Differentials

Maybe you’re in the middle of a full rebuild of that 2005 Chevrolet Express 3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 285 different Differentials in our inventory ranging from $2.49 to $1,374.99. That means you can find the exact parts or products you need to keep that 2005 Chevrolet Express 3500 running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 2005 Chevrolet Express 3500. Valvoline, Yukon Gear, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2005 Chevrolet Express 3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 5,100 reviews in this category, some of the top rated parts include Ring and Pinion Bearing Installation Kit with 3.8 stars and Multi Purpose Seal with 4.2 stars.

So if you’re in the market for aftermarket Differentials to keep your 2005 Chevrolet Express 3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2005 Chevrolet Express 3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 Chevrolet Express 3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Express 3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 2005 Chevrolet Express 3500 Differentials

What are the most purchased Differentials for the 2005 Chevrolet Express 3500?

Out of 285 Differentials for the 2005 Chevrolet Express 3500, the most popular in our inventory are:
Differential Cover Gasket
from $6.79
(13)
Differential Cover Gasket
Rear Differential Cover Gaskets
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Differential Cover B
from $7.99
This product is not rated
Differential Cover B
Differential Cover Bolts

What are the top-rated 2005 Chevrolet Express 3500 Differentials?

Top-rated Differentials for your 2005 Chevrolet Express 3500 based on customer reviews/ratings are:
Ring and Pinion Bearing Installation Kit
from $282.99
(255)
Ring and Pinion Bearing Installation Kit
“good price”
Multi Purpose Seal
from $44.99
(5)
Multi Purpose Seal
“How do you fix a leaking rear end? You seal it. That’s why I bought this seal.”
Cylindrical Bearing
from $31.99
(4)
Cylindrical Bearing
“excellent product”