2005 Chevrolet Blazer Belts and Hoses

Essential 2005 Chevrolet Blazer Belts and Hoses

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

ACDelco – Professional Molded Coolant Hose (Part No.G2000576598ACD)

Professional Molded Coolant Hose

from

$54.57
ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Has a heat and ozone resistant cover to increase the life of the hose
  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 36 Inch Length (Part No.87615)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 36 Inch Length

from

$39.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Molded 90 Degree Heater Hose (Part No.28479)

Molded 90 Degree Heater Hose

from

$21.49
Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:
  • Resists electrochemical degradation and water permeation
  • Use with heater hose connectors and bulk heater hose to create custom assemblies
  • Compatible for coolant, air and water applications
  • EPDM tube and cover, synthetic fiber reinforcement
  • SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Safety Stripe« Standard Straight Heater Hose (Part No.28409)

Safety Stripe« Standard Straight Heater Hose

from

$2.49
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – Molded 90 Degree Heater Hose (Part No.28474)

Molded 90 Degree Heater Hose

from

$14.79
Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:
  • Resists electrochemical degradation and water permeation
  • Use with heater hose connectors and bulk heater hose to create custom assemblies
  • Compatible for coolant, air and water applications
  • EPDM tube and cover, synthetic fiber reinforcement
  • SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
See More

Dorman – Fuel Filler Neck Hose (Part No.573-010)

Fuel Filler Neck Hose

from

$41.49
Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:
  • Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles
  • Durable construction – made of fuel-resistant materials to reduce future failure potential
  • Regulatory compliant – built to meet emission and inspection standards
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Spectra Premium – Fuel Filler Hose (Part No.FNH012)

Fuel Filler Hose

from

$33.49
Spectra Premium filler neck hoses are engineered, developed and validated by our in-house team of Canadian engineers ensuring it meets or exceeds the OE specifications.

Product Features:
  • Manufactured with high quality rubber to ensure it maintains its dimensional characteristics even in extreme cold/hot weather variations seen in the North American market
  • OE design to ensure exact fit, form and function
  • Fit tested to ensure ease of installation for the application it was intended for
  • Part is tested to ensure it meets the same requirements as OE specifications
  • Compatible with all fuel types it’s designed for
  • Includes necessary clamps for a complete installation solution
See More

ACDelco – Serpentine Idler/Tensioner Pulley: Direct Fit, Steel, 88.9 mm Diameter (Part No.15-20676)

Serpentine Idler/Tensioner Pulley: Direct Fit, Steel, 88.9 mm Diameter

from

$27.49
ACDelco Gold (Professional) Accessory Drive Belt Idler Pulleys are a high quality alternative to Original Equipment (OE) parts. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth (Part No.89006)

Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth

from

$30.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Poly Rib Belt Serpentine Belt; 100.59 Long, 6 Rib Count (Part No.5061005)

Poly Rib Belt Serpentine Belt; 100.59 Long, 6 Rib Count

from

$37.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Poly Rib Belt Serpentine Belt; 68.9 Long, 5 Rib Count (Part No.5050689)

Poly Rib Belt Serpentine Belt; 68.9 Long, 5 Rib Count

from

$30.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38001)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$32.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Dorman – Idler Pulley (Pulley only) (Part No.419-610)

Idler Pulley (Pulley only)

from

$12.49
This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
  • Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 21.44 Inch Long, 1.5 Inch Inner Dia. (Part No.81492)

Flex Radiator Hoses; EPDM Rubber, 21.44 Inch Long, 1.5 Inch Inner Dia.

from

$14.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25311)

Vulco-Flex½ II Flexible Coolant Hose

from

$58.99
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409HP)

Coolant Connector - Inlet/Outlet 3/4In. Tube x 5/8In. Hose

from

$24.49
HVAC heater hose connectors fail when the plastic material fatigues from heat and vibration. This upgraded Dorman OE FIX replacement connector is made from corrosion-resistant stainless steel for greater durability.

Product Features:
  • Improved design – this HVAC heater hose connector has been redesigned for greater durability the original equipment part
  • Durable construction – this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration
  • Easy to install – matches the original equipment form and dimensions for a simple replacement
  • Quality tested – this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life
See More

Dorman – Heater Hose Connector 5/8 x 5/8 (Part No.800-416)

Heater Hose Connector 5/8 x 5/8

from

$18.49
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dayco – Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set (Part No.D60968K1)

Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set

from

$108.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.

Product Features:
  • Custom engineered to cover 35 million problem drive vehicles in operation
  • Designed as an improvement over OE to address problematic drive systems
  • Features a specially designed serpentine belt with specific compounds that mitigate noise
See More

Litens – Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys (Part No.LV999002B)

Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys

from

$111.99
This Litens Serpentine Belt Drive Component Kit fits 1988-1995 Chev Blazer,C1500,C2500,K1500,K2500 / GMC Jimmy,K1500,K2500 w/4.3/5.0/5.7L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Dayco – Bottom Cog V-Belt; 34.5 Inch Long, Exact Fit Premium Quality (Part No.15345)

Bottom Cog V-Belt; 34.5 Inch Long, Exact Fit Premium Quality

from

$15.79
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Dayco – Bottom Cog V-Belt; 53 Inch Long, Exact Fit Premium Quality (Part No.17530)

Bottom Cog V-Belt; 53 Inch Long, Exact Fit Premium Quality

from

$15.79
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  •  Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  •  Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Dayco – Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (Part No.89201)

Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts

from

$70.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • This tensioner is another Dayco product proudly made in the USA
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999847A)

Serpentine Belt Tensioner: 1 Piece

from

$70.99
This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for GM applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Designed and engineered by the Original Equipment supplier of this application
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Heavy Duty Steel Pulley with 2 close tolerance ball bearings, pocket and Electro-deposited coating for superior corrosion resistance. Pulley specs: 70mm (OD) x 17mm (ID) x 26mm (Width)
  • Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt.
  • Belt removal is required to change the tensioner. Therefore, doing both together will extend accessory drive life and lower overall labor versus performing these services separately.
  • Installation instructions included
See More

ACDelco – GM Original Equipment Crankcase Vent Hose (Part No.B2150580326ACD)

GM Original Equipment Crankcase Vent Hose

from

$31.57
The ACDelco GM Original Equipment Crankcase Vent Hose is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

GM Genuine Parts – Positive Crank Ventilation (PCV) Valve Hose (Part No.93441238)

Positive Crank Ventilation (PCV) Valve Hose

from

$38.99
GM Genuine Parts PCV Valve Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Help – Emission Hose (Part No.46001)

Emission Hose

from

$9.99
Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.

Product Features:
  • Ideal replacement – this PCV tubing replaces the original tubing on specified vehicle years, makes and models
  • Durable materials – this PCV tubing is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

2005 Chevrolet Blazer Belts and Hoses

You count on your 2005 Chevrolet Blazer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 47 Belts and Hoses ranging in price from $2.49 to $154.88, you’re sure to find everything you need for your 2005 Chevrolet Blazer.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 12 different brands like Dayco, Litens, and Driveworks. 2005 Chevrolet Blazer Belts and Hoses start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 2,954 extensive product reviews on 2005 Chevrolet Blazer Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.53" Diameter with 4.8 stars and Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.31" Diameter with 4.9 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2005 Chevrolet Blazer below to get started!

Top-Rated Belts and Hoses Brands For Your 2005 Chevrolet Blazer

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Chevrolet Blazer running right for years to come. In our inventory you’ll find brands like Dayco, Litens, Driveworks, and even more.

Popular Litens Belts and Hoses

You’ll find popular Litens brand products across Pulleys and Belt Tensioners. All are waiting to get your 2005 Chevrolet Blazer back on the road. Some of the top-rated Litens products in these categories are:
Serpentine Belt Tensioner: 1 Piece
from $62.99
(5)
Serpentine Belt Tensioner: 1 Piece
Belt Tensioner Assemblies

Top-Rated Dayco Belts and Hoses


If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 2005 Chevrolet Blazer, and some of our most reviewed Dayco parts include:
Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count
from $58.99
(268)
Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count
Serpentine Belts

FAQs for 2005 Chevrolet Blazer Belts and Hoses

What are the most purchased Belts and Hoses for the 2005 Chevrolet Blazer?

Out of 47 Belts and Hoses for the 2005 Chevrolet Blazer, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count
from $31.99
(47)
Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count
from $53.99
(138)
Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count
Serpentine Belts

What are the top-rated 2005 Chevrolet Blazer Belts and Hoses?

Top-rated Belts and Hoses for your 2005 Chevrolet Blazer based on customer reviews/ratings are:
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.31" Diameter
from $53.99
(44)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.31" Diameter
“WHAT I WANTED AND NEEDED”