2005 Chevrolet Avalanche 2500 Drivetrains
More 2005 Chevrolet Avalanche 2500 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2005 Chevrolet Avalanche 2500, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2005 Chevrolet Avalanche 2500 Drivetrains
National – Bearings (Part No.HM804846)
from
$42.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Long Shaft Inner Clip For 9.25" GM IFS (Part No.33371)
from
$28.99
Long shaft inner clip for 9.25″ GM IFS.
Product Features:
See More
Product Features:
- Stub axle snap ring
- Fits GM 9.25″ IFS
National – Bearings (Part No.FC-66561)
from
$13.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Drive Shaft Center Support (Part No.S-HB-108-D)
Motive Gear – Differential Bearing Kit – Koyo (Part No.R14RLA)
from
$184.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- GM 14 BOLT 10.5 RING GEAR 98 & ON
Yukon Gear – 4340 Cut To Length Shaft For GM 14T & 11.5", 30 Spline, 34.8"-38.8" (Part No.21717)
from
$429.99
Yukon 4340 cut to length shaft for GM 14T & 11.5″, 30 spline, 34.8″-38.8″. Yukon 4340 Chrome Moly alloy axles offer a strength increase over stock while retaining a low cost. Yukon 4340 Chrome Moly alloy rear axles come with a limited lifetime warranty against manufacturing defects. Please verify bolt pattern on 2011 & later models. This axle has a 3.562″ bolt pattern. Some late model applcaitons use a larger bolt pattern.
Product Features:
See More
Product Features:
- Fits GM 10.5″ 14 bolt truck and GM 11.5″
- 4340 Chromoly
- 30 spline
- Cut to length design fits 34.8″-38.8″ applications
Yukon Gear – 10.5" GM 14 Bolt Truck Crush Sleeve (Part No.33100)
from
$12.99
10.5″ GM 14 bolt truck crush sleeve, 1989 & newer. Approx 0.920″ long.
Product Features:
See More
Product Features:
- Crush sleeve for 1989 and up GM 10.5″ 14 bolt truck
- 0.920″ tall
Yukon Gear – Yoke For ’98 And Newer GM 9.5" With A 1350 U/Joint Size And Triple Lip Design (Part No.41070)
from
$407.99
Yukon yoke for ’98 and newer GM 9.5″ with a 1350 U/joint size and triple lip design. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1998 and up GM 9.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
Yukon Gear – Grizzly Locker For GM 10.5" 14 Bolt Truck With 30 Spline Axles (Part No.28015)
from
$859.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!
Product Features:
See More
Product Features:
- Fits GM 10.5″ 14 bolt truck
- Installs into standard open carrier
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Dorman – Remanufactured Transfer Case Control Module (Part No.599-111)
from
$363.99
Transfer case control module no longer in control? Restore it cost-effectively with this replacement module that provides the same function and performance of the original on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case control module directly replaces the original equipment modules on certain vehicle years, makes and models
- Effective fix – replacement restores transfer case motor control and addresses trouble codes
- Thoroughly tested – each module undergoes rigorous testing to ensure reliable performance
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Dorman – Differential Pinion Yoke Assembly (Part No.697-551)
from
$232.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
National – Bearings (Part No.M802011)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
ACDelco – Trans Case Input Sft (Part No.J7110341646ACD)
from
$107.03
Trans Case Input Sft
Dorman – Differential Ring And Pinion Set (Part No.697-812)
from
$216.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications
- Effective fix – eliminates grinding and whining from failed original bearings
- Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
- Trustworthy quality – backed by team of designers and engineers in the United States
Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)
from
$12.99
Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)
from
$57.99
8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
Yukon Gear – O-Ring For Left Hand Carrier Bearing Adjuster For 9.25" GM IFS (Part No.33133)
from
$15.99
O-ring for left hand carrier bearing adjuster for 9.25″ GM IFS.
Product Features:
See More
Product Features:
- Axle o-ring
- Fits Chrysler 9.25″ IFS
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10241XD)
from
$221.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Yukon Gear – Eaton Positraction Shim Kit For 9.5" GM (Part No.16059)
from
$47.99
Eaton positraction shim kit for 9.5″ GM.
Product Features:
See More
Product Features:
- Shim kit
- Fits GM 9.5″ Eaton positraction
Dorman – 4 Wheel Drive Actuator Pigtail (Part No.645-902)
from
$113.99
This 4WD actuator wiring harness directly replaces the original harness on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this four-wheel drive actuator pigtail matches the fit and function of the original equipment
- Effective fix – properly restores 4WD functionality after original harness fails
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – Differential Cover B (Part No.33569)
from
$5.99
Differential Cover B
National – Multi Purpose Seal (Part No.710645)
from
$37.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
SKF – Input Shaft Seal (Part No.J1156204653SKF)
from
$30.61
Input Shaft Seal
Yukon Gear – GM 9.5" Rear Axle Bearing And Seal Kit (Part No.10003)
from
$109.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit for semi-floating GM 9.5″, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits GM applications
- Includes axle bearing and seal
- Services one side
- 2.985″ O.D.
- 1.700″ I.D.
Yukon Gear – Axle Bearing & Seal Kit For GM 9.25" IFS Front (Part No.10037)
from
$197.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Left, Right, and intermediate axle bearings and seals for 9.25″ GM IFS. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits GM 9.25″ IFS
- Includes intermediate bearing, axle bearings and seals
Driveworks – Wheel Bearing (Part No.S-RP-1561-GM)
Driveworks – Clutch Release Bearing (Part No.S-B-2610)
Popular 2005 Chevrolet Avalanche 2500 Drivetrains Categories
2005 Chevrolet Avalanche 2500 Drivetrains
You count on your 2005 Chevrolet Avalanche 2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 373 Drivetrains ranging in price from $2.59 to $1,778.99, you’re sure to find everything you need for your 2005 Chevrolet Avalanche 2500.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 27 different brands like Valvoline, Moog, and Dorman. 2005 Chevrolet Avalanche 2500 Drivetrains start as low as $2.59!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,908 extensive product reviews on 2005 Chevrolet Avalanche 2500 Drivetrains. Some of the top-rated Drivetrains products we carry are Ring and Pinion Bearing Installation Kit with 3.8 stars and Universal Joint with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2005 Chevrolet Avalanche 2500 below to get started!
Top-Rated Drivetrains Brands For Your 2005 Chevrolet Avalanche 2500
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Chevrolet Avalanche 2500 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Dorman, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2005 Chevrolet Avalanche 2500 back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2005 Chevrolet Avalanche 2500 Drivetrains
What are the most purchased Drivetrains for the 2005 Chevrolet Avalanche 2500?
Out of 373 Drivetrains for the 2005 Chevrolet Avalanche 2500, the most popular in our inventory are:
What are the top-rated 2005 Chevrolet Avalanche 2500 Drivetrains?
Top-rated Drivetrains for your 2005 Chevrolet Avalanche 2500 based on customer reviews/ratings are:
from
$34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
