2005 Chevrolet Astro Drivetrains
More 2005 Chevrolet Astro Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2005 Chevrolet Astro, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2005 Chevrolet Astro Drivetrains
Yukon Gear – 14 Plate Dura Grip Composite Clutches, GM 7.5 (Part No.16119)
from
$202.99
14 plate DURAGRIP COMPOSITE clutches, GM 7.5.
Product Features:
See More
Product Features:
- Clutch kit
- Fits GM 7.5″ and 7.625″ with Dura Grip positraction
- Steel clutches
National – Bearings (Part No.HM89210)
from
$14.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Pinion Install Kit For GM 7.5" Differential (Part No.13064)
from
$187.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 1982-1999 GM 7.5″ and 7.625″
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – 7.2" Shifter Seal (Part No.30280)
from
$24.99
7.2″ shifter seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Shifter seal
- Fits GM 7.2″ IFS
SKF – Input Shaft Seal (Part No.J1156204653SKF)
from
$30.61
Input Shaft Seal
Dorman – Help – C.V. Joint Bolted Split Boot Kit Front Outer (Part No.03609)
from
$34.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.
Product Features:
See More
Product Features:
- Save labor with easy installation methods
- Comes with grease and clamps
- Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
- The Speedi and Quick Boot are installed without special tools
National – Bearings (Part No.B-2010)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Positraction Internals For 7.5" And 7.625" GM With 28 Spline Axles (Part No.16117)
from
$279.99
Yukon positraction internals for 7.5″ and 7.625″ GM with 28 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects. This kit fits Yukon Dura Grip & Eaton positraction cases. It is not compatible with any other positractions.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM gm 7.5″ and 7.625″ with 28 spline Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Dorman – Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter (Part No.614-004)
from
$29.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
USA Standard Gear – Pinion Installation Kit For ’00 & Up GM 7.5" & 7.625" (Part No.60011)
from
$122.99
7.5″ & 7.625″ GM 00 & UP PINION KIT .
Product Features:
See More
Product Features:
- Fits 2000 and up GM 7.625″
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
USA Industries – Drive shaft (Part No.109355)
Idemitsu – Type HP Automatic Transmission Fluid – 1 qt (Part No.30040099-75000C)
from
$13.79
Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10208)
from
$99.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Powertrax – Lock Right Locker (Part No.1921-LR)
from
$368.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Pro-King – Differential Internal Nest Kit (Part No.741B717)
from
$223.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Pro-King – Differential Cross Shaft (Part No.742G930)
from
$2.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – 7.5" & 8.2" GM Redi Sleeve Yoke Saver (Part No.30221)
from
$119.99
7.5″ & 8.2″ GM REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits GM 7.5″, 7.625″ and 8.2″
Yukon Gear – Standard Open Side Gear And Thrust Washer For 7.625" GM (Part No.33379)
from
$11.99
Standard Open side gear thrust washer for 7.625″ GM.
Product Features:
See More
Product Features:
- Side gear thrust washer for GM 7.625″
- Fits standard open differentials only
Yukon Gear – Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS (Part No.33244)
from
$31.99
Adjuster lock bolt for left hand case half of 7.2″ and 9.25″ GM IFS.
Product Features:
See More
Product Features:
- Side adjuster lock bolt
- Fits GM 7.2″ IFS and 9.25″ IFS
Motive Gear – Differential Gear Install Kit (Part No.GM7.5IK)
USA Standard Gear – Standard Spider Gear Set For GM 7.5", 26 Spline (Part No.39023)
from
$156.99
Product Features:
See More
- Spider gear kit
- Fits GM 7.5″ 26 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Pro-King – Differential Ring Gear Bolt (Part No.741B935)
from
$2.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Differential Cover B (Part No.33572)
from
$7.99
Differential Cover B
Yukon Gear – 7.2" GM 7.5" GM & 8.2" GM Pinion Seal (Part No.30192)
from
$9.99
7.2″ GM 7.5″ GM & 8.2″ GM pinion seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits GM 7.2″ IFS, 1999 and down GM 7.5″ and 7.625″ and GM 8.2″
- 2.660″ O.D.
Motive Gear – Differential Master Bearing Kit – Timken (Part No.R7.5GRMKT)
from
$129.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- GM 7.5 TIMKEN MASTER KIT ’82-98
Richmond Gear – RngPnnInstlKt (Part No.83-1044-1)
from
$182.99
RngPnnInstlKt
SKF – Axle Shaft Seal (Part No.K4021204335SKF)
from
$11.73
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
National – Multi Purpose Seal (Part No.710491)
from
$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Popular 2005 Chevrolet Astro Drivetrains Categories
2005 Chevrolet Astro Drivetrains
You count on your 2005 Chevrolet Astro to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 252 Drivetrains ranging in price from $1.99 to $1,527.99, you’re sure to find everything you need for your 2005 Chevrolet Astro.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 25 different brands like Moog, DriveWorks, and Dorman. 2005 Chevrolet Astro Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 519 extensive product reviews on 2005 Chevrolet Astro Drivetrains. Some of the top-rated Drivetrains products we carry are Rear Differential Cover with 4.5 stars and Bearings with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2005 Chevrolet Astro below to get started!
Top-Rated Drivetrains Brands For Your 2005 Chevrolet Astro
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Chevrolet Astro running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Dorman, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Transfer Cases and Differentials. All are waiting to get your 2005 Chevrolet Astro back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 2005 Chevrolet Astro, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 2005 Chevrolet Astro Drivetrains
What are the most purchased Drivetrains for the 2005 Chevrolet Astro?
Out of 252 Drivetrains for the 2005 Chevrolet Astro, the most popular in our inventory are:
What are the top-rated 2005 Chevrolet Astro Drivetrains?
Top-rated Drivetrains for your 2005 Chevrolet Astro based on customer reviews/ratings are:
from
$20.99
(38)
Rear Differential Cover
“Looks great, face lift for the rear differential. Old one was rusted & in bad shape. Just remember to get the correct size.”
from
$32.99
(18)
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
“Well built , with grease fittings. Good OEM alternative!! Recommend!!”
