2005 Cadillac Escalade Performance and Racing Products

Below you will find various in-demand Cadillac Performance and Racing Products, components and accessories for your 2005 Escalade. Advance Auto Parts has popular Escalade parts like Performance Engines, Performance Ignition Products, Performance Oil Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Escalade model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2005 Cadillac Escalade Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2005 Cadillac Escalade Performance and Racing Products Categories

Performance Fuel and Ignition Controllers

Performance Oil Filters

Computer Chip Programmers

Performance Mufflers

Performance Air Filters

Performance Coils

Performance Air Intake Kits

Performance Exhaust Headers

Engine Cold Air Intakes

Performance Shifters

Performance Valve Covers

Performance Exhaust System Kits

Performance Exhaust Catalytic Converters

Performance Front and Rear Shock or Strut Kits

Performance Engine Valve Springs

Performance Spark Plug Wires

Performance Flywheel and Flexplates

Performance Camshaft and Lifter Kits

Performance Upper Performance Control Arm Bushings

Performance Engine Camshafts

Performance Ring and Pinions

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Sway Bar Bushings

Performance Torque Converters

Essential Performance and Racing Products for 2005 Cadillac Escalades

Hypertech Speedometer Calibrator Color: Recalibrate Your Speedometer To Account For Changes To Tire Size, 3300

from

$239.99

The Speedometer Calibrator recalibrates speedometer readings when non-stock tire sizes and/or rear gear ratios are installed.

Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 3 Inch Outlet ID, 17233

from

$172.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

from

$208.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing, and a black powder coated heat shield to help prevent heated engine air from entering the intake inlet. Included are the velocity stack adapter, hose clamps, MAF adapter ring, couplers, stainless steel clamps and all necessary hardware for an OE fit and finish. The Spectre Intake tube comes with an adapter to mount the stock MAF sensor.

JBA Performance W0832 Ignition Wires 96-99 GM 5.0/5.7L Truck Red

from

$109.99

JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

B & M Automatic Shifter - Stealth Pro Ratchet - Universal, 81120

from

$579.99

One of B&M’s easiest race shifters to drive, the Stealth Pro Ratchet self-centers after each pull so you can’t over-shift a gear, and integrates a one-hand reverse lockout meeting NHRA/IHRA rules. It includes a neutral safety switch, backup-light switch, a simulated carbon-fiber hydro-dipped aluminum cover for a high-tech look, and the tough black-anodized Magnum Grip handle with replaceable plates. A 5-ft Super-Duty cable, brackets, levers, gear indicator, and hardware are included for popular Chrysler, Ford, and GM transmissions; install kits may be required. Overall: 10.75 x 2.9 x 12 in.

K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Competition Cams HV NSR Cam 218/226 .541/.541 Hyd Roller for GEN III/IV 4.8L/5.3L/6.0L, 54-271-11

from

$817.99

“This COMP Cams® HV NSR cam is designed for GM cathedral port 4.8L/5.3L/6.0L powered vehicles. It provides amazing drivability and throttle response while also requiring minimal tuning. Torque is increased across the entire operating range while still producing +69 horsepower at peak. Get the most out of your daily driver truck, SUV or 4×4 without sacrificing street manners. The NSR HV cam will provide a deep rumble with a mild, yet noticeable lope. At .541″” lift, this cam is designed to allow drop-in performance with stock valve springs. Also compatible with stock converters.”

Dynomax Ultra Flo Exhaust System Kit Flanged Intermediate Pipe, Muffler, Tail Pipe, Tips, Clamps, 19361

from

$515.99

Give your Chevrolet Avalanche, Suburban or Yukon XL 1500’s exhaust system an upgrade with a DynoMax Ultra Flo welded 3-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2135

from

$68.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Energy Suspension Control Arm Bushing Set, 3.3190R

from

$131.99

For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy’s Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.

MSD Ignition Ignition Coils, Street Fire, Gm Ls2/Ls3/Ls4/Ls7/Ls9, 2005-2013, 8-Pack, 55118

from

$469.99

These coils mount directly in place of factory style versions and accept the OEM connectors as well. Performance output is improved thanks to a careful selection of better materials and efficient winding ratios.

Suncore Rear Active Suspension To Passive Gas Shock Absorber Conversion Kit, 150G-12-R-RES

from

$117.99

Suncore’s 150G-12-R-RES Standard Rear Shock Absorbers are designed to be used as a passive conversion for the Autoride air shocks. Z55 equipped SUVs can replace their expensive rear auto leveling air shocks or non-electronic vehicles can use these shocks as a standard replacement. This kit also includes bypass resistors to disable any Autoride warnings on the dash when used as a conversion.

B & M Torque Converter, Holeshot 2000, 70417

from

$675.99

This Holeshot 2000 fits 1984-93 GM 700R4/4L60 w/30 spline input, 1993-1997 4L60E w/30 spline input, and 1997-04 Corvettes. This converter retains the lock-up feature. Holeshot torque converters are for serious-minded performance enthusiasts and offer additional strength and durability features not found in our Tork Master or Traveler series of converters. The Holeshot 2000 converter is an excellent choice for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace-brazed impeller fins and turbine, a new precision alloy impeller hub, and new heavy-duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. If your vehicle is equipped with a plate-type nitrous system or supercharger, please refer to the Nitrous Holeshot line of converters. Notes: Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, and less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide, or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75-inch bolt circle

Top Street Performance GM LSX V8 (4.8L-7.0L) Polished Fabricated Aluminum Valve Covers with Coil Bracket Mounts, JM8081-6P

from

$188.99

Top Street Performance fabricated valve covers are designed to add rocker clearance for aftermarket cam and valve train set-ups, and they add a huge aesthetic improvement over the stock covers. They are made of 6061-T6 aluminum, are TIG welded, and feature a CNC-machined billet aluminum rail for a guaranteed seal. Offered with or without coil mounts, they come complete with all installation hardware.

Competition Cams OE-Style Hydraulic Roller Lifter Set for '87+ OE Roller SBC and LT/LS Engines, 850-16

from

$288.99

COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.

MagnaFlow Hm Grade Federal / Epa Compliant Direct-Fit Catalytic Converter, 93419

from

$649.99

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93419. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 93419 includes (1) Torca Clamp, (1) Donut Gasket, (1) Crush Ring Gasket. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Energy Suspension Control Arm Bushing Set, 3.3194G

from

$191.99

Motive Gear Performance Differential Ring and Pinion, G885488IFS

from

$209.99

Motive Gear Performance Differential Ring and Pinion, G885488IFS.

Top Street Performance GM LS V8 Black Finned Aluminum 2-Piece Valve Covers with Coil Mounts and Covers, JM8082-2BK

from

$367.99

Let’s face it, nobody wants an ugly set of ignition coils sitting atop their newly dressed up engine. You can take the time and effort to relocate them or you get a set of TSP’s two-piece valve covers. The base has a tall internal height to allow for added valvetrain clearance and features provisions for mounting two of the most popular LS coil packs – no brackets required. It also features a baffled stock-style ventilation set-up. The coil cover features cut-outs for routing the wiring harness and spark plug wires and comes with a classic, finned top.

Energy Suspension Front Sway Bar Bushing Set - 32 mm, 3.5214G

from

$62.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

K&N NextGen Cold Air Intake: Adds Up To 27.3 Horsepower, With Washable Air Filter, 50-3070

from

$399.99

This K&N NextGen cold air intake system is engineered for Chevrolet Silverado 1500 V8 4.8L/5.3L/6.2L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 30.8% to your engine and provides an increase of 18.78 horsepower and 15.59 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Competition Cams CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA, 54-426-11

from

$541.99

HYDRAULIC ROLLER – XFI RPM Hi-Lift: Great street/strip camshaft for mid-range and high rpm power. Requires custom tuning.

"Competition Cams Valve Spring Kit, For Ls 1.310"" Beehive 1 Kt, 26915CS-KIT"

from

$471.99

“Competition Cams Valve Spring Kit, For Ls 1.310″” Beehive 1 Kt, 26915CS-KIT. ”

from

$218.99

Hays Flexplate GM Ls, 10-030. PERFORMANCE PARTS>PERFORMANCE DRIVELINE>CLUTCHES>FLEXPLATES & FLYWHEELS from Hays

"JBA Performance 1832SJT 1 1/2"" Header Shorty Stainless Steel 96-99 GM Truck 5.0/5.7L Titanium Ceramic"

from

$759.99

JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

"JBA Performance 1850S-1 1 5/8"" Header Shorty Stainless Steel 99-02 GM Truck 6.0L"

from

$741.99

Energy Suspension Rear Sway Bar Bushing Set - 28 mm, 3.5215R

from

$30.49

Upgrade your 2005 Cadillac Escalade with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 2005 Cadillac Escalade, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Performance and Racing Products are key to keeping your Escalade functioning at its best. At Advance Auto Parts, we offer a wide selection of 67 Performance and Racing Products for the 2005 Cadillac Escalade, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2005 Cadillac Escalade at great prices. Our Performance and Racing Products inventory for this model ranges from just $17.99 to $1,117.99, with an average price of $368.24. Our 67 Performance and Racing Products in stock come from 21 trusted brands, so you’re sure to find the right part for your 2005 Cadillac Escalade without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Cadillac Escalade, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, B & M, Spectre, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 4.8 stars average rating from customers. B & M and Spectre also bring quality to the table, with Performance and Racing Products available starting at $208.99, and at an average 4.3 stars rating. With 734 customer reviews and counting, our 2005 Cadillac Escalade Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Cadillac Escalade is always ready to roll. We’re committed to providing you with everything you need to keep your Escalade in top shape, all in one place. Start shopping confidently below for your 2005 Cadillac Escalade!

Best-Selling Performance Engines for 2005 Cadillac Escalades

Enhance the driving experience in your Cadillac with 13 quality Performance Engine components, starting at $288.99.

show more show less

Competition Cams XFI RPM 206/212 Hydraulic Roller Cam, 54-408-11

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

"Competition Cams VALVE SPRING KIT, FOR LS 1.310"" BEEHIVE 1 KT, 26918CS-KIT"

from

$482.99

“This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .625″” maximum lift, these Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life.Kit Includes:26918-16 Beehive Valve Springs774-16 Steel Retainers623-16 7° Steel Valve Locks511-16 Valve Seals4705-16 Spring Seats”

Competition Cams XFI XE-R 224/230 Hydraulic Roller Cam, 54-444-11

from

$541.99

HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.

from

$288.99

from

$471.99

“Competition Cams Valve Spring Kit, For Ls 1.310″” Beehive 1 Kt, 26915CS-KIT. ”

Competition Cams XFI RPM HI-LIFT 228/230 Hydraulic Roller Cam, 54-428-11

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

from

$1117.99

This Holeshot 3000 is for all 1998-02 GM Camaro/Firebirds, 1999-06 GM1500 trucks/SUV’s with LS1, 4.8L, 5.3L, or 6.0L engine and 4L60E or 4L65E transmission. This converter retains the lock-up feature. Holeshot torque converters are for serious-minded performance enthusiasts and offer additional strength and durability features not found in our Tork Master or Traveler series of converters. The Holeshot 3000 converter is an excellent choice for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace brazed impeller fins and turbine, new precision alloy impeller hub and new heavy duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. If your vehicle is equipped with a plate type nitrous system or supercharger, please refer to the Nitrous Holeshot line of converters. Notes: Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. Will Not fit 1997-05 Corvette. Has both 10.75 and 11.08-inch bolt circles

from

$849.99

This Holeshot 2400 fits all 1998-02 GM Camaro/Firebirds w/LS1 engine, 1999-up GM1500 trucks and SUV’s with 4.8L, 5.3L, or 6.0L engine and 4L60E or 4L65E transmission. This converter retains the lock-up feature. Holeshot torque converters are for serious-minded performance enthusiasts and offer additional strength and durability features not found in our Tork Master or Traveler series of converters. The Holeshot 2400 converter is an excellent choice for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace brazed impeller fins and turbine, new precision alloy impeller hub and new heavy duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. Notes: Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. Will Not fit 1997-05 Corvette. Has both 10.75 and 11.08-inch bolt circles.

from

$817.99

from

$541.99

HYDRAULIC ROLLER – XFI RPM Hi-Lift: Great street/strip camshaft for mid-range and high rpm power. Requires custom tuning.

Competition Cams XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam, 54-424-11

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Competition Cams XFI XE-R 238/240 Hydraulic Roller Cam, 54-448-11

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

from

$499.99

The Tork Master 2400 fits 1984-93 GM 700R4/4L60 w/30 spline input, 1993-1996 4L60E w/30 spline input transmissions. This converter retains the lock-up feature. Don’t let the exceptional value fool you into thinking Tork Master Converters are not packed with lots of quality features, making them the best value-priced street performance converters money can buy. These converters perform best when paired with stock to modified engines up to 350hp/350 ft lbs of torque, and lighter weight applications, like street rods. The Tork Master will provide noticeably quicker launches and harder acceleration while maintaining normal daily driving qualities. Upgrades like a new precision alloy steel pump drive tube, needle thrust bearing when factory equipped, new thrust washer between turbine and cover when required, and pressure tested and fully balanced by expertly trained technicians. Notes: Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. Not recommended for big block, supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75 in. bolt circle

Most Popular 2005 Cadillac Escalade Performance Ignition Products

Customize your Cadillac with 5 Performance Ignition Products products like Performance Coils and Performance Spark Plug Wires, all priced under $124.99.

show more show less

MSD Ignition Wire Set - Street Fire, Gm Truck 4.8L/5.3L/6.0L, 5574

from

$81.99

When it comes to plug wires, resistance is king. The Street Fire Spark Plug Wires feature a low resistance (500 ohms per foot) conductor that’s wrapped in a sleek and durable black 8mm sleeve. A helical wound Kevlar-core combination provides an EMI-Noice resistant path from coil-to-plug. The heavy-duty terminals are wrapped in black silicone boots that protect the conductor from engine heat to ensure spark delivery. Light the fire, not your wallet-with MSD Street Fire.

MSD Ignition Super Conductor Spark Plug Wire Set - 99-13 Gm Truck & Suv - Red, 32829

from

$124.99

“Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire: incredibly low resistance without electronic interference. In a single 11-inch length of super conductor wire, there are only 40-50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there are over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferromagnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “”choke.”” This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produces a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature dual drimp terminals. As the name implies, the terminals feature two crimps: one for the sleeve of the wire and another separate crimp to grasp the conductor.”

Accel Ignition Coil - SuperCoil GM LS2/LS3/LS7 engines, yellow, Individual - Super Coil for GM LS2, LS3, and LS7, 140043

from

$109.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

MSD Ignition Coil, GM, LS Series, Late Model Coil, 8246

from

$91.99

MSD Ignition multiple spark coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture tire to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high RPM performance! There are two types of housings for the MSD coils. Check your application for the visual match.

MSD Ignition Coil Street Fire GM L-Series Truck 99-09 Single, 5510

from

$69.99

MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.

Top Picks for 2005 Cadillac Escalade Performance Oil Filters

Upgrade Cadillac Escalades with top-quality Performance Oil Filters parts, including 1 OEM and aftermarket selections for your 2005 model.

show more show less

K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-1007

from

$17.99

In-Demand Performance Mufflers for 2005 Cadillac Escalades

Select from 1 premium Performance Mufflers parts for your 2005 Cadillac Escalade.

show more show less

from

$172.99

Most Sold 2005 Cadillac Escalade Performance Air Filters

Explore our best-selling Cadillac parts for the 2005 Escalade among 2 OEM and aftermarket options starting from $68.99.

show more show less

K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2129

from

$68.99

from

$68.99

Top-Rated Performance and Racing Products Brands For Your 2005 Cadillac Escalade

Shop for the best-rated brands offering Performance and Racing Products and other products for your 2005 Cadillac Escalades. Below you’ll find some of our best rated Performance and Racing Products from K&N, B & M, and Spectre, and more. Performance and Racing Products from these brands that fit a 2005 Escalade start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 2005 Cadillac Escalade Performance and Racing Products

When it comes to maintaining or upgrading your 2005 Cadillac Escalade, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2005 Cadillac Escalade. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $51.99. Plus, with over 326 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $68.99

(187)

K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2129

“Easy to install and a perfect fit.”

from $68.99

(89)

K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2135

“I always use these filters.”

from $17.99

(50)

K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-1007

“I only use K&N filters. They work great and have this convenient nut for getting it on amd off.”

Popular B & M 2005 Cadillac Escalade Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2005 Cadillac Escalade owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 2005 Escalade, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these B & M Performance and Racing Products range from $299.99 to $549.99, plus, with more than 15 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

B & M Automatic Shifter - Z-Gate - Universal, 80681

from $299.99

(11)

B & M Automatic Shifter – Z-Gate – Universal, 80681

“Husband has been redoing his ford truck and I over heard him say he needed a shifter I went and bought him this shifter and he loves it very easy to p”

B & M Automatic Shifter - Megashifter - Universal, 80690

from $549.99

(1)

B & M Automatic Shifter – Megashifter – Universal, 80690

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

B & M Automatic Shifter - Unimatic - Universal, 80775

from $299.99

(3)

B & M Automatic Shifter – Unimatic – Universal, 80775

“Super easy to install, works nice.”

FAQs for 2005 Cadillac Escalade Performance and Racing Products

Which Performance and Racing Products are best-sellers for 2005 Cadillac Escalades?

Out of 67 Performance and Racing Products that fit 2005 Cadillac Escalades, the following parts are the top sellers:

Spectre Air Intake Kit, 9900 (22905814) – $208.99
MSD Ignition Wire Set – Street Fire, Gm Truck 4.8L/5.3L/6.0L, 5574 (10211568) – $81.99
MSD Ignition Super Conductor Spark Plug Wire Set – 99-13 Gm Truck & Suv – Red, 32829 (10211512) – $124.99

What’s the price range for 2005 Cadillac Escalade Performance and Racing Products?

Performance and Racing Product prices for the 2005 Cadillac Escalade start at $17.99 and go up to $1,117.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 2005 Cadillac Escalade?

The average price for Performance and Racing Products for the 2005 Cadillac Escalade is $368.24. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Cadillac Escalade model years?

Yes, we currently carry Performance and Racing Products for 25 model years of Cadillac Escalades between 1999 and 2026. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 2005 Cadillac Escalade?

The cheapest 2005 Cadillac Escalade Performance and Racing Products we carry in stock are:

K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-1007 (6120006) – $17.99
Energy Suspension Rear Sway Bar Bushing Set – 28 mm, 3.5215R (10600169) – $30.49
Energy Suspension Rear Sway Bar Bushing Set – 28 mm, 3.5215G (10600173) – $30.49
Energy Suspension Front Sway Bar Bushing Set – 32 mm, 3.5214G (10600166) – $62.99
Dynomax Exhaust Pipe Spout 3 Inch Inlet ID 4 Inch Outlet OD, 36474 (10044674) – $66.99

What are the top-rated Performance and Racing Products that fit the 2005 Cadillac Escalade?

Out of 734 reviews by customers, our 2005 Cadillac Escalade Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2005 Cadillac Escalade and their top-rated products:

Programmers
- Bully Dog Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device, 40417 (11051146) – $469.99
Performance Air Filters
- Bully Dog Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device, 40417 (11051146) – $469.99
Performance Oil Filters
- Bully Dog Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device, 40417 (11051146) – $469.99

What types of Performance and Racing Products do you sell for my 2005 Cadillac Escalade?

As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 2005 Cadillac Escalade:

Can I get help with 2005 Cadillac Escalade Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Performance and Racing Products and more.

What is your return policy for Cadillac Escalade Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Cadillac Escalade Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 Cadillac Escalade Performance and Racing Products

Hypertech – Hypertech Speedometer Calibrator Color: Recalibrate Your Speedometer To Account For Changes To Tire Size, 3300 (Part No.3300)

Dynomax – Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 3 Inch Outlet ID, 17233 (Part No.17233)

Spectre – Spectre Air Intake Kit, 9900 (Part No.9900)

JBA Performance – JBA Performance W0832 Ignition Wires 96-99 GM 5.0/5.7L Truck Red (Part No.W0832)

B & M – B & M Automatic Shifter – Stealth Pro Ratchet – Universal, 81120 (Part No.81120)

K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (Part No.HP-2001)

Competition Cams – Competition Cams HV NSR Cam 218/226 .541/.541 Hyd Roller for GEN III/IV 4.8L/5.3L/6.0L, 54-271-11 (Part No.54-271-11)

Dynomax – Dynomax Ultra Flo Exhaust System Kit Flanged Intermediate Pipe, Muffler, Tail Pipe, Tips, Clamps, 19361 (Part No.19361)

K&N – K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2135 (Part No.33-2135)

Energy Suspension – Energy Suspension Control Arm Bushing Set, 3.3190R (Part No.3.3190R)

MSD Ignition – MSD Ignition Ignition Coils, Street Fire, Gm Ls2/Ls3/Ls4/Ls7/Ls9, 2005-2013, 8-Pack, 55118 (Part No.55118)

Suncore – Suncore Rear Active Suspension To Passive Gas Shock Absorber Conversion Kit, 150G-12-R-RES (Part No.150G-12-R-RES)

B & M – B & M Torque Converter, Holeshot 2000, 70417 (Part No.70417)

Top Street Performance – Top Street Performance GM LSX V8 (4.8L-7.0L) Polished Fabricated Aluminum Valve Covers with Coil Bracket Mounts, JM8081-6P (Part No.JM8081-6P)

Competition Cams – Competition Cams OE-Style Hydraulic Roller Lifter Set for ’87+ OE Roller SBC and LT/LS Engines, 850-16 (Part No.850-16)

MagnaFlow – MagnaFlow Hm Grade Federal / Epa Compliant Direct-Fit Catalytic Converter, 93419 (Part No.93419)

Energy Suspension – Energy Suspension Control Arm Bushing Set, 3.3194G (Part No.3.3194G)

Motive Gear – Motive Gear Performance Differential Ring and Pinion, G885488IFS (Part No.G885488IFS)

Top Street Performance – Top Street Performance GM LS V8 Black Finned Aluminum 2-Piece Valve Covers with Coil Mounts and Covers, JM8082-2BK (Part No.JM8082-2BK)

Energy Suspension – Energy Suspension Front Sway Bar Bushing Set – 32 mm, 3.5214G (Part No.3.5214G)

K&N – K&N NextGen Cold Air Intake: Adds Up To 27.3 Horsepower, With Washable Air Filter, 50-3070 (Part No.50-3070)

Competition Cams – Competition Cams CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA, 54-426-11 (Part No.54-426-11)

Competition Cams – "Competition Cams Valve Spring Kit, For Ls 1.310"" Beehive 1 Kt, 26915CS-KIT" (Part No.26915CS-KIT)

Hays – Hays Flexplate GM Ls, 10-030 (Part No.10-030)

JBA Performance – "JBA Performance 1832SJT 1 1/2"" Header Shorty Stainless Steel 96-99 GM Truck 5.0/5.7L Titanium Ceramic" (Part No.1832SJT)

JBA Performance – "JBA Performance 1850S-1 1 5/8"" Header Shorty Stainless Steel 99-02 GM Truck 6.0L" (Part No.1850S-1)

Energy Suspension – Energy Suspension Rear Sway Bar Bushing Set – 28 mm, 3.5215R (Part No.3.5215R)

Competition Cams – Competition Cams XFI RPM 206/212 Hydraulic Roller Cam, 54-408-11 (Part No.54-408-11)

Competition Cams – "Competition Cams VALVE SPRING KIT, FOR LS 1.310"" BEEHIVE 1 KT, 26918CS-KIT" (Part No.26918CS-KIT)

Competition Cams – Competition Cams XFI XE-R 224/230 Hydraulic Roller Cam, 54-444-11 (Part No.54-444-11)

Competition Cams – Competition Cams OE-Style Hydraulic Roller Lifter Set for ’87+ OE Roller SBC and LT/LS Engines, 850-16 (Part No.850-16)

Competition Cams – "Competition Cams Valve Spring Kit, For Ls 1.310"" Beehive 1 Kt, 26915CS-KIT" (Part No.26915CS-KIT)

Competition Cams – Competition Cams XFI RPM HI-LIFT 228/230 Hydraulic Roller Cam, 54-428-11 (Part No.54-428-11)

B & M – B & M Holeshot 3000, 70442 (Part No.70442)

B & M – B & M Holeshot 2400, 70441 (Part No.70441)

Competition Cams – Competition Cams HV NSR Cam 218/226 .541/.541 Hyd Roller for GEN III/IV 4.8L/5.3L/6.0L, 54-271-11 (Part No.54-271-11)

Competition Cams – Competition Cams CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA, 54-426-11 (Part No.54-426-11)

Competition Cams – Competition Cams XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam, 54-424-11 (Part No.54-424-11)

Competition Cams – Competition Cams XFI XE-R 238/240 Hydraulic Roller Cam, 54-448-11 (Part No.54-448-11)

B & M – B & M Tork Master 2400, 70418 (Part No.70418)

MSD Ignition – MSD Ignition Wire Set – Street Fire, Gm Truck 4.8L/5.3L/6.0L, 5574 (Part No.5574)

MSD Ignition – MSD Ignition Super Conductor Spark Plug Wire Set – 99-13 Gm Truck & Suv – Red, 32829 (Part No.32829)

Accel – Accel Ignition Coil – SuperCoil GM LS2/LS3/LS7 engines, yellow, Individual – Super Coil for GM LS2, LS3, and LS7, 140043 (Part No.140043)

MSD Ignition – MSD Ignition Coil, GM, LS Series, Late Model Coil, 8246 (Part No.8246)

MSD Ignition – MSD Ignition Coil Street Fire GM L-Series Truck 99-09 Single, 5510 (Part No.5510)

K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-1007 (Part No.HP-1007)

Dynomax – Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 3 Inch Outlet ID, 17233 (Part No.17233)

K&N – K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2129 (Part No.33-2129)

K&N – K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2135 (Part No.33-2135)