2005 Cadillac DeVille Shocks and Struts
More 2005 Cadillac DeVille Shocks and Struts
Find your specific 2005 Cadillac DeVille original or aftermarket Shocks and Struts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2005 Cadillac DeVille Shocks and Struts
KYB – Shock Mount (Part No.SM5334)
from
$26.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
MOOG – Shock Mount (Part No.K5341)
from
$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
KYB – Jounce Bumper and Bellows (Part No.SB105)
from
$30.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
MOOG – Strut Bellows (Part No.K90462)
from
$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
MOOG – Strut Bellows (Part No.K90463)
from
$16.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
KYB – Jounce Bumper and Bellows (Part No.SB104)
from
$23.79
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
MOOG – Strut Bellows (Part No.K90464)
from
$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Monroe – Strut-Mate Strut Boot Kit (Part No.63622)
from
$27.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
Monroe – Strut-Mate Strut Boot Kit (Part No.63633)
from
$29.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
KYB – Jounce Bumper and Bellows (Part No.SB103)
from
$29.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Rare Parts – Strut Mount (Part No.RP17227)
from
$199.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Meets or exceeds OE requirements
- Helps restore vehicle ride.
- Reduces tire wear
MOOG – Strut Mount (Part No.K5339)
from
$83.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE requirements
- Superior rubber to steel bonding for durability
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Includes new spring seat insulator and installation hardware to eliminate noise issues
- Electroplate and corrosion-resistant coating to help prevent galvanic corrosion
Rare Parts – Strut Mount (Part No.RP17163)
from
$159.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Meets or exceeds OE requirements
- Helps restore vehicle ride.
- Reduces tire wear
MOOG – Suspension Strut Mount (Part No.K5337)
from
$58.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE requirements
- Superior rubber to steel bonding for durability
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Includes new spring seat insulator and installation hardware to eliminate noise issues
- Electroplate and corrosion-resistant coating to help prevent galvanic corrosion
TRW – Strut Mounting Kit (Part No.L3033322325TRW)
from
$97.53
Strut Mounting Kit
Monroe – Gas-Matic Strut (Part No.81799)
from
$51.99
Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5820)
from
$44.49
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Rare Parts – Shock Absorber (Part No.RP50521)
from
$286.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle control & handling Reduces tire wear Increases the Life of Other Steering and Suspension Components
Monroe – Complete Strut Assembly: Includes Strut and Mount (Part No.171798)
from
$118.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- ASSEMBLED IN THE USA – Each Quick-Strut assembly is assembled with pride in Paragould, Arkansas
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5802)
from
$76.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
KYB – High Pressure Monotube Gas Shock (Part No.KG4515)
from
$72.99
Product Features:
See More
- Adds up to 25% more damping performance over original equipment shocks
- Components and valving designed specifically for classic cars
- High gas pressure design provides instant, extra control
- Monotube design outperforms all other standard shock absorbers
- Unique, air-free, hydraulic unit eliminates performance fade
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.171822)
from
$188.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
Monroe – OESpectrum Strut (Part No.71685)
from
$122.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.181822)
from
$144.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
- EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
- CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
- COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
Rare Parts – Shock Absorber (Part No.RP50526)
from
$365.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle control & handling Reduces tire wear Increases the Life of Other Steering and Suspension Components
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5801)
from
$85.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Popular 2005 Cadillac DeVille Shocks and Struts Categories
2005 Cadillac DeVille Shocks and Struts
Maybe you’re in the middle of a full rebuild of that 2005 Cadillac DeVille. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 15 different Shocks and Struts in our inventory ranging from $6.99 to $132.99. That means you can find the exact parts or products you need to keep that 2005 Cadillac DeVille running smoothly.
Shocks and Struts are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2005 Cadillac DeVille. KYB, DriveWorks, and Moog are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Shocks and Struts for your 2005 Cadillac DeVille, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 196 reviews in this category, some of the top rated parts include Shock Mount with 4.5 stars and Suspension Strut Mount with 4.3 stars.
So if you’re in the market for aftermarket Shocks and Struts to keep your 2005 Cadillac DeVille rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Shocks and Struts Brands To Make Your 2005 Cadillac DeVille Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 Cadillac DeVille demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your DeVille the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.
Popular Monroe Shocks and Struts
We carry Monroe parts in our stock across Front Shock and Struts and Shock Boots, Levelers, and Accessories categories, plus more. For a 2005 Cadillac DeVille, our most popular Monroe Shocks and Struts include:
Top 2005 Cadillac DeVille Shocks and Struts from KYB
KYB products are another trusted brand when it comes to Shocks and Struts for your 2005 Cadillac DeVille. Popular KYB parts include:
FAQs for 2005 Cadillac DeVille Shocks and Struts
What are the most purchased Shocks and Struts for the 2005 Cadillac DeVille?
Out of 15 Shocks and Struts for the 2005 Cadillac DeVille, the most popular in our inventory are:
What are the top-rated 2005 Cadillac DeVille Shocks and Struts?
Top-rated Shocks and Struts for your 2005 Cadillac DeVille based on customer reviews/ratings are:
