2005 Buick Rendezvous Belts and Hoses

Name: Poly Rib Belt Serpentine Belt; 88.58 Long, 6 Rib Count
Brand: Driveworks
SKU: 885K6
Price: 23.99 USD
Rating: 4.5 (35 reviews)

Below you will find various in-demand Buick Belts and Hoses, components and accessories for your 2005 Rendezvous. Advance Auto Parts has popular Rendezvous parts like Heater Hoses, Belt Tensioners, Engine Cooling Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Rendezvous model years including 2002, 2003, 2004, 2006, 2007 and more. Select a category of 2005 Buick Rendezvous Belts and Hoses below and start saving instantly.

Popular 2005 Buick Rendezvous Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Serpentine Belt Drive Component Kits

Belt Tensioner Pulleys

Heater Hose Fittings

Fuel Hoses

Engine Oil Cooler Hoses

Drive Belt Idler Assemblies

Fuel Injection Throttle Body Heater Hoses

Essential Belts and Hoses for 2005 Buick Rendezvouses

from

$23.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$35.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$457.99

Need to replace some fuel lines? Factory-style rigid replacement fuel lines can be tough to route under the vehicle. These Dorman OE FIX lines are made of braided stainless steel over flexible PTFE tubing, made to specific length for select vehicles, with new brackets and factory connectors for the easiest possible installation, and a long-lasting fix.

Product Features:

Stainless Steel Braided Fuel Line
Stainless Steel Braided Fuel Line
Ready to install – these braided stainless steel over PTFE flexible fuel lines are already cut to specific length for select vehicles, and include new brackets and factory connectors
Full length – these lines are made to the correct length for the specified vehicle, but flexible so they’re easier to route than rigid lines, saving replacement time

from

$15.49

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability.
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$13.79

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$17.41

(Pulley Only) Dorman’s Belt Tensioner Pulley is engineered to maintain tension on the serpentine belt for the life of the belt–thereby keeping the alternator charging, the water pump running, and the power steering pump and A/C compressor operating properly. They feature a high-quality double-sealed bearing to resist damage from contaminants. Replacement prevents belt slip and eliminates squeak, squeal or groaning noise associated with a worn belt tensioner pulley.

Product Features:

Steel or plastic construction for long-lasting durability against heat, shock and corrosion
Replacement stops squeak, squeal or groaning noise associated with a worn Belt Tensioner Pulley
Direct replacement for a proper fit every time
Vehicle try-on testing and rigorous materials testing to ensure high-quality performance

from

$51.99

This pulley is manufactured by the original equipment pulley supplier to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the United States to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long trouble-free performance. Manufactured for a variety of GM/GMC/Saturn and Saab vehicles. Complete with new mounting bolt and dust shield for ease of installation and long life. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance.
Installation instructions included.
Running surface designed and engineered for proper belt tracking.

from

$59.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Dayco’s patented Nylon Pivot Bushing keeps internal components in constant contact to maintain proper tensioner alignment

from

$68.99

Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. This popular tensioner designed for General Motors vehicles, looks, fits, and performs like the original part being replaced. O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Caution: Many non-OE aftermarket parts have removed the internal damping component in their designs. This may cause system noise and vibration. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada” Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Polymer Pulley
Professional Mechanics will change this tensioner in 20 minutes
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$9.38

Heater Hose

from

$99.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation – the leading cause of hose failure
EPDM tube; synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$39.99

Shock Kit

from

$15.79

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$16.49

GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle

from

$11.57

Provide an airtight seal between PCV hoses and prevent vacuum leaks with Dorman’s resilient PCV Elbows. Made from nylon, rubber or plastic, the elbows are durable against fluctuating under hood temperatures. They are excellent for the repair of emission and vacuum systems on cars, trucks and tractors.

Product Features:

Made from oil-resistant materials
Easy to install – just press into place
Direct replacement for a proper fit every time
Resilient construction resists brittleness and cracking

from

$42.58

Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:

Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
Precision molded teeth are protected by durable fabric facing for long life
Tensile cord is engineered and tested for maximum load carrying capabilities
Rubber backing resists abrasion, oil and heat

from

$108.11

ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

from

$235.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

from

$88.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$15.99

GM Genuine Parts Multi Purpose Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$19.79

GM Genuine Parts Fuel Injection Throttle Body Heater Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$29.30

Dayco, Acc. Belt Idler Pulley

from

$20.79

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$28.99

This pulley is manufactured by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life

from

$9.79

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$6.34

HEATER HOSE

from

$16.79

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

Upgrade your 2005 Buick Rendezvous with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2005 Buick Rendezvous, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Belts and Hoses are key to keeping your Rendezvous functioning at its best. At Advance Auto Parts, we offer a wide selection of 73 Belts and Hoses for the 2005 Buick Rendezvous, designed to meet your needs without breaking the bank. From Heater Hose replacements to Belt Tensioners upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2005 Buick Rendezvous at great prices. Our Belts and Hoses inventory for this model ranges from just $2.49 to $457.99, with an average price of $45.83. Our 73 Belts and Hoses in stock come from 12 trusted brands, so you’re sure to find the right part for your 2005 Buick Rendezvous without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Buick Rendezvous, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Litens, Driveworks, and more. Dayco Belts and Hoses start at just $9.38 and boast an impressive 5 stars average rating from customers. Litens and Driveworks also bring quality to the table, with Belts and Hoses available starting at $28.99, and at an average 5 stars rating. With 2,190 customer reviews and counting, our 2005 Buick Rendezvous Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Buick Rendezvous is always ready to roll. We’re committed to providing you with everything you need to keep your Rendezvous in top shape, all in one place. Start shopping confidently below for your 2005 Buick Rendezvous!

Best-Selling Heater Hoses for 2005 Buick Rendezvouses

Enhance the driving experience in your Buick with 21 quality Heater Hose components, starting at $7.29.

show more show less

from

$16.49

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$15.49

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability.
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$28.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$46.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$19.49

Product Features:

Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
Fit just as the OEM quick connects for easy installation as well as removal

from

$38.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$18.79

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$27.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$15.99

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$62.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$46.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$19.79

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$15.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$7.29

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$15.79

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$30.49

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$23.49

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$11.50

Designed to replace original equipment manufacturer hose, Dayco Molded Heater Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.

Product Features:

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C)
The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
Meets SAE J20R4, Class D-1 requirements for improved service hose
Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
Limited Three Year Warranty

from

$10.76

Heater Hose Connecto

from

$10.49

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$9.38

Heater Hose

Most Popular 2005 Buick Rendezvous Belt Tensioners

Customize your Buick with 6 Belt Tensioners products like Belt Tensioner Assemblies, all priced under $145.99.

show more show less

from

$68.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Polymer Pulley
Professional Mechanics will change this tensioner in 20 minutes
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$145.99

Litens Automotive is the original equipment supplier of this tensioner to General Motors, Saturn, and Suzuki. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). The Litens replacement part maintains the round wire spring, the heavy duty steel pulley, and the internal damping components specified by the O.E. manufacturer. The tensioner maintains the OE designed lift feature for ease of belt removal and installation. Also used on Holden vehicles in Australia. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
This belt tensioner has belt-length indicator marking to warn of excessive belt stretch. Durable Steel Pulley for long service life and performance.
Professional Mechanics will change this tensioner in about 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$59.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Dayco’s patented Nylon Pivot Bushing keeps internal components in constant contact to maintain proper tensioner alignment

from

$136.71

Acc. Belt Tensioner

from

$96.13

Acc. Belt Tensioner

from

$65.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

Top Picks for 2005 Buick Rendezvous Engine Cooling Hoses

Upgrade Buick Rendezvouses with top-quality Engine Cooling Hoses parts, including 5 OEM and aftermarket selections for your 2005 model.

show more show less

from

$19.29

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$13.79

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$39.99

Shock Kit

from

$33.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$15.79

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

In-Demand Serpentine and V Belts for 2005 Buick Rendezvouses

Select from 15 premium Serpentine and V Belts parts for your 2005 Buick Rendezvous, with prices ranging from $29.30 to $235.99.

show more show less

from

$53.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$39.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$53.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$45.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$72.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$88.99

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$29.30

Dayco, Acc. Belt Idler Pulley

from

$98.97

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

from

$63.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$65.60

Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:

Constructed with aramid-reinforced EPDM compounds
Engineered to conform to high mileage, worn or misaligned drives
Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)

from

$42.58

Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
Precision molded teeth are protected by durable fabric facing for long life
Tensile cord is engineered and tested for maximum load carrying capabilities
Rubber backing resists abrasion, oil and heat

from

$45.86

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$45.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$235.99

from

$72.61

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

Most Sold 2005 Buick Rendezvous Fuel Hoses

Explore our best-selling Buick parts for the 2005 Rendezvous among 1 OEM and aftermarket options starting from $457.99.

show more show less

from

$457.99

Stainless Steel Braided Fuel Line
Stainless Steel Braided Fuel Line
Ready to install – these braided stainless steel over PTFE flexible fuel lines are already cut to specific length for select vehicles, and include new brackets and factory connectors
Full length – these lines are made to the correct length for the specified vehicle, but flexible so they’re easier to route than rigid lines, saving replacement time

Top-Rated Belts and Hoses Brands For Your 2005 Buick Rendezvous

Shop for the best-rated brands offering Belts and Hoses and other products for your 2005 Buick Rendezvouses. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Driveworks, and more. Belts and Hoses from these brands that fit a 2005 Rendezvous start at just $9.38 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2005 Buick Rendezvous Belts and Hoses

When it comes to maintaining or upgrading your 2005 Buick Rendezvous, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2005 Buick Rendezvous. With over 26 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.38, with an average price of just $43.04. Plus, with over 902 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$29.3

This product is not rated

Dayco, Acc. Belt Idler Pulley

“”

from
$38.99

This product is not rated

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 Inch Length

“”

from
$88.99

This product is not rated

Serpentine Belt Kit; With Belt, 2 Pulleys, and Tensioner, 4 Piece Set

“”

Popular Litens 2005 Buick Rendezvous Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2005 Buick Rendezvous owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2005 Rendezvous, Advance Auto Parts carries a full inventory of 5 Litens Belts and Hoses. Plus you will be keeping your Buick in peak condition while saving money because prices on these Litens Belts and Hoses range from $28.99 to $145.99, plus, with more than 56 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$68.99

(4)

Accessory Drive Belt Tensioner – Original Equipment Quality

“Installed simply and has worked fine for the first week in use.”

from
$38.49

This product is not rated

Idler Pulley: Direct Fit, Steel, 76mm Diameter, w/ Hardware

“”

from
$51.99

This product is not rated

Idler Pulley: Direct Fit, Steel, 70mm Diameter, w/ Hardware

“”

FAQs for 2005 Buick Rendezvous Belts and Hoses

Which Belts and Hoses are best-sellers for 2005 Buick Rendezvouses?

Out of 73 Belts and Hoses that fit 2005 Buick Rendezvouses, the following parts are the top sellers:

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (10457820) – $28.99
Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 27mm Width, Smooth (19130023) – $20.79
Heater Hose Connector (9110038) – $15.49

What’s the price range for 2005 Buick Rendezvous Belts and Hoses?

Belts and Hose prices for the 2005 Buick Rendezvous start at $2.49 and go up to $457.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2005 Buick Rendezvous?

The average price for Belts and Hoses for the 2005 Buick Rendezvous is $45.83. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Buick Rendezvous model years?

Yes, we currently carry Belts and Hoses for 5 model years of Buick Rendezvouses between 2002 and 2007. Belts and Hoses are bought most frequently for the following model years: 2007, 2006, 2004, 2003, and 2002.

What are the cheapest Belts and Hoses for my 2005 Buick Rendezvous?

The cheapest 2005 Buick Rendezvous Belts and Hoses we carry in stock are:

Safety Stripe« Standard Straight Heater Hose (10504844) – $2.49
PCV Tube Connector (10716591) – $5.29
PCV Valve Tubing (11811903) – $5.32
HEATER HOSE (50100222) – $6.34
Radiator Hose (12592215) – $6.98

What are the top-rated Belts and Hoses that fit the 2005 Buick Rendezvous?

Out of 2,190 reviews by customers, our 2005 Buick Rendezvous Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2005 Buick Rendezvous and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (3290155) – $53.99
- Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (5064937) – $39.99
- Poly Rib Belt Serpentine Belt; 86.5 Long, 6 Rib Count (5061784) – $45.49
Radiator Hoses
- Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (3290155) – $53.99
- Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (5064937) – $39.99
- Poly Rib Belt Serpentine Belt; 86.5 Long, 6 Rib Count (5061784) – $45.49
Belt Tensioners
- Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (3290155) – $53.99
- Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (5064937) – $39.99
- Poly Rib Belt Serpentine Belt; 86.5 Long, 6 Rib Count (5061784) – $45.49

What types of Belts and Hoses do you sell for my 2005 Buick Rendezvous?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2005 Buick Rendezvous:

Can I get help with 2005 Buick Rendezvous Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Belts and Hoses and more.

What is your return policy for Buick Rendezvous Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Buick Rendezvous Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 Buick Rendezvous Belts and Hoses

Driveworks – Poly Rib Belt Serpentine Belt; 88.58 Long, 6 Rib Count (Part No.885K6)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.25" Diameter (Part No.D71949)

Dorman – BRAIDED FUEL LINE (Part No.819-001)

Dorman – Heater Hose Connector (Part No.800-403)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.63" Long, 1.25" Diameter (Part No.D70898)

Dorman – Idler Pulley (Part No.G6011833488DOR)

Litens – Idler Pulley: Direct Fit, Steel, 70mm Diameter, w/ Hardware (Part No.900518A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89241)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999553A)

Dayco – Heater Hose (Part No.R30301220851DAY)

Gates – Molded Heater Hose: EPDM, Plastic, Steel, Direct Fit, 0.62" Inside Diameter (Part No.23334)

Suncore – Shock Kit (Part No.2-12S251600-001)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7" Long, 1.31" Diameter (Part No.B72274)

GM Genuine Parts – Positive Crankcase Ventilation (PCV) Tube (Part No.12601804)

Dorman – PCV Elbow (Part No.B2200751931DOR)

Bando – Drive Belt (Part No.W10001885892BAN)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000603929ACD)

Dayco – FEAD KITS (Part No.5060930K1)

Dayco – Serpentine Belt Kit; With Belt, 2 Pulleys, and Tensioner, 4 Piece Set (Part No.5060865K3)

GM Genuine Parts – Fuel Injection Throttle Body Heater Inlet Hose (Part No.24504912)

GM Genuine Parts – Fuel Injection Throttle Body Heater Hose (Part No.24504913)

Dayco – Dayco, Acc. Belt Idler Pulley (Part No.G60201221081DAY)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 27mm Width, Smooth (Part No.89052)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (Part No.900027A)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4" Long, .56" Diameter (Part No.A71692)

ACDelco – HEATER HOSE (Part No.R3030578499ACD)

Gates – Premium Molded Heater Hose (Part No.18030)

Dayco – Molded Heater Hose; EPDM Rubber, 23/64 Inch Diameter, 5 Inch Length (Part No.86825)

Dorman – Heater Hose Connector (Part No.800-403)

Dayco – Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 8 1/4 Inch Length (Part No.86800)

Dorman – Molded Heater Hose: Aluminum (Part No.626-511)

Gates – Quick-Lok½ Heater Hose Connector (Part No.28500)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 Inch Length (Part No.88425)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.87658)

Dayco – Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 11 Inch Length (Part No.87832)

GM Genuine Parts – Fuel Injection Throttle Body Heater Inlet Hose (Part No.24504912)

Dorman – Molded Heater Hose: Steel (Part No.626-502)

Dorman – Molded Heater Hose: Steel (Part No.626-107)

GM Genuine Parts – Fuel Injection Throttle Body Heater Hose (Part No.24504913)

Dorman – Help – Heater Hose Connector – 5/8 In. Tube x 5/8 In. Hose (Part No.47165)

Gates – Premium Molded Heater Hose (Part No.19026)

Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 13 Inch Length (Part No.88426)

Gates – Premium Molded Heater Hose (Part No.19815)

Gates – Premium Molded Heater Hose (Part No.18789)

Dayco – Molded Small ID Heater Hose (Part No.R3030173858DAY)

Dorman – Heater Hose Connecto (Part No.R3036834783DOR)

Gates – Premium Molded Heater Hose (Part No.18250)

Dayco – Heater Hose (Part No.R30301220851DAY)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999553A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999679A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89241)

INA – Acc. Belt Tensioner (Part No.G60011070265INA)

ACDelco – Acc. Belt Tensioner (Part No.G6001584544ACD)

Dayco – Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89389)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.31" Diameter (Part No.C72275)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.63" Long, 1.25" Diameter (Part No.D70898)

Suncore – Shock Kit (Part No.2-12S251600-001)

Gates – Premium Molded Coolant Hose (Part No.22557)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7" Long, 1.31" Diameter (Part No.B72274)

Dayco – Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (Part No.5060930)

Driveworks – Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (Part No.930K6)

Dayco – Poly Rib Belt Serpentine Belt; 86.5 Long, 6 Rib Count (Part No.5060865)

Driveworks – Poly Rib Belt Serpentine Belt; 86.5 Long, 6 Rib Count (Part No.865K6)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 93.585" Long, 6 Rib Count, Exact Fit (Part No.K060930HD)

Dayco – Serpentine Belt Kit; With Belt, 2 Pulleys, and Tensioner, 4 Piece Set (Part No.5060865K3)

Dayco – Dayco, Acc. Belt Idler Pulley (Part No.G60201221081DAY)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578716ACD)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060930)

Dayco – Poly Rib Serpentine Belt (Part No.W1000323031DAY)

Bando – Drive Belt (Part No.W10001885892BAN)

Bando – Multi Rib (Serpentine) Belt (Part No.W1000102185BAN)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060864)

Dayco – FEAD KITS (Part No.5060930K1)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578704ACD)

Dorman – BRAIDED FUEL LINE (Part No.819-001)