2005 BMW M3 Cooling and Climate Controls
More 2005 BMW M3 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 2005 BMW M3, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 2005 BMW M3 Cooling and Climate Controls
Behr – Hella Service Visco® Engine Cooling Fan clutch (Part No.G5010236176BEH)
from
$193.94
The Visco® clutch has the task of making the frictional connection to the fan wheel depending on the temperature, and influencing its speed. The drive torque is transferred by means of wear-free viscous friction to the fan wheel, the continuously variable speed of which is set on the basis of the operating conditions. In the case of the electrically-driven Visco® clutch, control takes place directly via sensors. Requirement-based cooling optimizes the coolant temperature, engine noise and fuel consumption.
Product Features:
See More
Product Features:
- Out of box, drop in replacements
- Factory mounts for easy install
- Exact fit
- Reduced labor time
- Higher customer satisfaction
Carquest Premium – Radiator (Part No.813714)
from
$219.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
- Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
Behr – Air Conditioning Evaporator, With Valve (Part No.R1130300225BEH)
from
$398.73
Air Conditioning Evaporator, With Valve
DENSO – New Compressor With Clutch (Part No.471-1559)
from
$576.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.
Product Features:
See More
Product Features:
- DENSO is the world’s largest OE supplier of A/C compressors
- Each compressor is precision manufactured for exact replacement
- Designed for high output and extended durability
- Highest quality in the Aftermarket
Behr – Behr Blower Motor (Part No.R2031406631BEH)
from
$285.25
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.
Product Features:
See More
Product Features:
- OEM Quality.
- Direct Fit Replacement.
- Highly efficient
- Quiet-running
- Meets or exceeds OE design and performance.
Behr – A/C Receiver Drier (Part No.R104056891BEH)
from
$86.80
The Behr A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application.
- Meets or exceeds the vehicle manufacturer specifications.
- Utilizes factory style fittings and connectors.
- Includes the required o-rings and associated hardware
Behr – Expansion Tank Cap (Part No.G1040458946BEH)
from
$23.33
The Behr Expansion Tank Cap is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – A/C Liquid Line Hose Assembly w/o Orifice Tube (Part No.T56196)
from
$47.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
Motorad – Radiator Cap: 30 PSI (Part No.T-65)
from
$29.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
MTC – Radiator Mount Bracket (Part No.G1021305122MTC)
from
$8.19
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More
Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56800)
from
$165.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Graf – Water Pump (Part No.G3000458070GRA)
from
$129.84
The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.
Product Features:
See More
Product Features:
- All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
- The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
- The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
- The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
- On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
- After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.
Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)
from
$44.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Factory Air – Coolant Temp Sensor Switch (Part No.36413)
from
$30.05
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Color coded for easy identification
- Zinc coated terminal to resist corrosion
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26772)
from
$27.49
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
KAI – A/C Condenser (Part No.CNDDPI4994)
from
$79.99
New Platinum Pro A/C Condenser
Product Features:
See More
Product Features:
- Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Original Equipment – Coolant Level Sensor (Part No.G1050335088OEA)
from
$25.60
Coolant Level Sensor
KAI – A/C System Seal Kit (Part No.FTT010073)
from
$18.99
New Standard Replacement A/C System Seal Kit, MT2640, L4 Engine
Product Features:
See More
Product Features:
- MT2640, L4 Engine
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
APA/URO Parts – Water Pump Pulley (Part No.G3020299682APA)
from
$65.68
Water Pump Pulley
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3688)
from
$137.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better than OE provide durability and long service life
- All ABS sensors are tested for proper fit, form, and function
- Wire diameter and sheathing same or larger than OE to ensure product quality
- Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
- Includes all necessary brackets and hardware
APA/URO Parts – Radiator Mount (Part No.G102075950APA)
from
$2.76
Radiator Mount
MTC – Radiator Mount (Part No.G102076019MTC)
from
$3.25
Radiator Mount
ACM – A/C Evaporator Temperature Sensor (Part No.R1071273277ACM)
from
$34.47
ACM is a supplier of Original Equipment quality climate control products. Heater / Evaporator Temperature Sensor
See More
Dorman – Remanufactured Climate Control Module (Part No.599-271)
from
$678.99
Climate controls stopped working? Seamlessly restore operation by easily swapping the malfunctioning original module with this fully tested replacement unit.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC control module matches the appearance and function of the original unit on specific vehicles
- Functionality-tested – module has been tested to ensure the same operation as the stock module
- Simple installation – no advanced vehicle knowledge is required for proper installation and setup
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Programa – HVAC Control Module (Part No.R2059178465PRO)
from
$388.52
Remanufactured Programa specializes in BMW, Mercedes Benz, Volvo, Porsche and Saab remanufactured ignition control units. Remanufacturing Process:
Product Features:
See More
Product Features:
- Complete visual inspection.
- Boards and components are repaired or replaced.
- Any test that fails to meet OEM specifications is repaired or replaced.
- Once the ICU meets all OEM specifications, the unit is reassembled, sealed and packaged.
Programa – HVAC Control Module (Part No.R2059178467PRO)
from
$491.68
Remanufactured Programa specializes in BMW, Mercedes Benz, Volvo, Porsche and Saab remanufactured ignition control units. Remanufacturing Process:
Product Features:
See More
Product Features:
- Complete visual inspection.
- Boards and components are repaired or replaced.
- Any test that fails to meet OEM specifications is repaired or replaced.
- Once the ICU meets all OEM specifications, the unit is reassembled, sealed and packaged.
Popular 2005 BMW M3 Cooling and Climate Controls Categories
2005 BMW M3 Cooling and Climate Controls
You count on your 2005 BMW M3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 78 Cooling and Climate Controls ranging in price from $1.24 to $678.99, you’re sure to find everything you need for your 2005 BMW M3.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 26 different brands like Permatex, Imperial, and Carquest Premium. 2005 BMW M3 Cooling and Climate Controls start as low as $1.24!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 527 extensive product reviews on 2005 BMW M3 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Radiator Cap: 30 PSI with 4.1 stars and Thermostatic Fan Control – Preset with 3.0 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2005 BMW M3 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 2005 BMW M3
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 BMW M3 running right for years to come. In our inventory you’ll find brands like Permatex, Imperial, Carquest Premium, and even more.
Popular ACM Cooling and Climate Controls
You’ll find popular ACM brand products across Air Conditioning Parts. All are waiting to get your 2005 BMW M3 back on the road. Some of the top-rated ACM products in these categories are:
Top-Rated Permatex Cooling and Climate Controls
If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2005 BMW M3, and some of our most reviewed Permatex parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
FAQs for 2005 BMW M3 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 2005 BMW M3?
Out of 78 Cooling and Climate Controls for the 2005 BMW M3, the most popular in our inventory are:
What are the top-rated 2005 BMW M3 Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 2005 BMW M3 based on customer reviews/ratings are:
from
$38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”
