2005 BMW 645Ci Cooling and Climate Controls

Below you will find various in-demand BMW Cooling and Climate Controls, components and accessories for your 2005 645Ci. Advance Auto Parts has popular 645Ci parts like Air Conditioning Parts, Heating Parts, HVAC Electrical Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other 645Ci model years including 2004 and more. Select a category of 2005 BMW 645Ci Cooling and Climate Controls below and start saving instantly.

Popular 2005 BMW 645Ci Cooling and Climate Controls Categories

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

Thermostats

Radiator Fan Motors

Thermostat and Water Outlet Assemblies

Engine Oil Thermostats

Coolant Reservoirs

Coolant Temperature Sensors

Heater Cores

Coolant Reservoir Caps

Engine Coolant Pipe O-Rings

Blower Motor Resistors

AC Condensers

AC Evaporators

Engine Coolant Pipes

Thermostat Housing Gaskets

Heater Valves

Engine Auxiliary Water Pumps

AC O-Ring and Gasket Kits

AC Discharge Lines

AC Suction Lines

Water Pump Gaskets

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Drain Plugs

AC Refrigerant Pressure Sensors

Coolant Level Sensors

Heater Core Temperature Sensors

AC Receiver or Drier

Essential Cooling and Climate Controls for 2005 BMW 645Cis

from

$103.99

This automatic transmission oil cooler thermostat is designed to match the fit and function of the original thermostat on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this automatic transmission oil cooler thermostat is designed to match the fit and function of the original thermostat on specified applications
Restores functionality – reliable replacement for an original part that has failed due to fatigue, vibration or contamination
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$531.99

New Platinum Pro Radiator Fan Assembly, 7/05-07 525/530I, 08 528I, 04-5 545I, 04-5 645I

Product Features:

7/05-07 525/530I, 08 528I, 04-5 545I, 04-5 645I, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$145.99

Using advanced re-engineering materials and processes, our remanufactured water pumps match O.E. fit and performance. Each unit is supplied with new, unitized seals and the proper O.E.-specified bearing design to meet the specific radial and axial load.

Product Features:

100% leak testing and hub-pull testing ensures reliable performance.
O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).

from

$76.99

Air conditioning stopped working? It could be as simple as the pressure switch. This replacement A/C transducer switch is the fix for corroded terminals or a broken connector on the original switch. A direct replacement to restore air conditioning.

Product Features:

Direct replacement – this A/C transducer switch is an exact replacement for the original switch
Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
Easy installation – no special tools required
Quality tested – switch has been tested to ensure proper fit and function

from

$249.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$58.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$181.99

Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.

from

$85.99

All-in-one bolt on solution for a complete repair

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable
Includes quality gasket or O-ringá to ensure proper seal (where applicable
Coated with corrosion and rust inhibitor
100% leak tested
All-in-one bolt on solution for a complete repair
Includes quality thermostat
Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
Coated with corrosion and rust inhibitor
100% leak tested
All-in-one bolt on solution for a complete repair

from

$155.99

Carquest Premium blower motor resistors are designed to restore proper functionality in the HVAC system while meeting or exceeding original equipment (O.E.) specifications. Carquest Premium blower motor resistors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium blower motor resistors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium blower motor resistors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured with high quality materials, industry-leading electronic components and strict quality controls
Extensive design validation testing and 100% end-of-line tested
Gaskets or seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$104.99

Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Resistant to cracking and wear from heat cycles preventing coolant loss
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$70.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$56.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$25.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$31.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$2.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$299.99

URO Premium products are re-engineered to solve the problem of these failure prone parts. URO Premium products feature a more robust design and/or higher-grade materials to vastly improve the reliability and durability of the product. Each URO Premium product bears the “URO Premium” seal (top left) and “PRM” suffix to their part number to easily distinguish them from their OEM counterparts. Most importantly, we are so confident in our engineering that each URO Premium product will come with a warranty no auto part has come with before. You no longer have to make a choice between brands, the choice is clear.

from

$148.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$57.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$27.49

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$84.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

Product Features:

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$46.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Preset thermostatic fan control
185 Deg. F preset
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$148.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$540.99

As one of the world’s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$85.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$23.99

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$62.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$32.99

The engine cooling system is critical to engine sustainability under all operating conditions. The Coolant Level Sensor reports the level of coolant either in the radiator overflow container or in the radiator tank.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$7.49

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

Upgrade your 2005 BMW 645Ci with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2005 BMW 645Ci, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Cooling and Climate Controls are key to keeping your 645Ci functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Cooling and Climate Controls for the 2005 BMW 645Ci, designed to meet your needs without breaking the bank. From Air Conditioning Part replacements to Heating Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2005 BMW 645Ci at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $2.99 to $540.99, with an average price of $110.45. Our 46 Cooling and Climate Controls in stock come from 13 trusted brands, so you’re sure to find the right part for your 2005 BMW 645Ci without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 BMW 645Ci, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Carquest Premium, Mahle, DriveWorks, and more. Carquest Premium Cooling and Climate Controls start at just $70.99 and boast an impressive 4.4 stars average rating from customers. Mahle and DriveWorks also bring quality to the table, with Cooling and Climate Controls available starting at $3.49, and at an average 4.4 stars rating. With 106 customer reviews and counting, our 2005 BMW 645Ci Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 BMW 645Ci is always ready to roll. We’re committed to providing you with everything you need to keep your 645Ci in top shape, all in one place. Start shopping confidently below for your 2005 BMW 645Ci!

Best-Selling Air Conditioning Parts for 2005 BMW 645Cis

Enhance the driving experience in your BMW with 10 quality Air Conditioning Part components, starting at $31.49.

show more show less

from

$70.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$249.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$56.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$31.49

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$148.99

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$540.99

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$148.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$85.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$76.99

Direct replacement – this A/C transducer switch is an exact replacement for the original switch
Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
Easy installation – no special tools required
Quality tested – switch has been tested to ensure proper fit and function

from

$62.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

Top Picks for 2005 BMW 645Ci HVAC Electrical Parts

Upgrade BMW 645Cis with top-quality HVAC Electrical Parts parts, including 2 OEM and aftermarket selections for your 2005 model.

show more show less

from

$57.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$43.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

In-Demand Blower Motor and Related Products for 2005 BMW 645Cis

Select from 3 premium Blower Motor and Related Products parts for your 2005 BMW 645Ci, with prices ranging from $113.99 to $155.99.

show more show less

from

$142.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM.Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$155.99

Designed to meet or exceed OE specifications for fit, form and function
Manufactured with high quality materials, industry-leading electronic components and strict quality controls
Extensive design validation testing and 100% end-of-line tested
Gaskets or seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$113.99

Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

Most Sold 2005 BMW 645Ci Engine Cooling Parts

Explore our best-selling BMW parts for the 2005 645Ci among 29 OEM and aftermarket options starting from $2.99.

show more show less

from

$23.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248 Deg. F
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$84.99

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$145.99

100% leak testing and hub-pull testing ensures reliable performance.
O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).

from

$3.49

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$65.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$117.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part
Ideal solution – engineered for a seamless installation
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$46.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Preset thermostatic fan control
185 Deg. F preset
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$69.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Adjustable thermostatic fan control
160 Deg. F – 210 Deg. F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$30.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$28.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$32.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$103.99

Direct replacement – this automatic transmission oil cooler thermostat is designed to match the fit and function of the original thermostat on specified applications
Restores functionality – reliable replacement for an original part that has failed due to fatigue, vibration or contamination
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$25.99

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$19.99

Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$531.99

New Platinum Pro Radiator Fan Assembly, 7/05-07 525/530I, 08 528I, 04-5 545I, 04-5 645I

Product Features:

7/05-07 525/530I, 08 528I, 04-5 545I, 04-5 645I, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$144.99

This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications
Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$23.99

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$379.99

This new pump is 100% tested to ensure the highest quality. Each unit is built to meet or exceed all OE specifications and is validated for fit, form, and function. Application specific design to ensure a perfect fit and correct operation for unsurpassed quality.

Product Features:

All components necessary for installation are supplied with pump
Specialized for vehicles using supplemented cooling for the engine or components
Follow all enclosed instructions to maximize pump life and validate warranty
Plastic housing
Electric water pump

from

$299.99

from

$199.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$104.99

Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Resistant to cracking and wear from heat cycles preventing coolant loss
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$99.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$85.99

All-in-one bolt on solution for a complete repair

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable
Includes quality gasket or O-ringá to ensure proper seal (where applicable
Coated with corrosion and rust inhibitor
100% leak tested
All-in-one bolt on solution for a complete repair
Includes quality thermostat
Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
Coated with corrosion and rust inhibitor
100% leak tested
All-in-one bolt on solution for a complete repair

Top-Rated Cooling and Climate Controls Brands For Your 2005 BMW 645Ci

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2005 BMW 645Cis. Below you’ll find some of our best rated Cooling and Climate Controls from Carquest Premium, Mahle, and DriveWorks, and more. Cooling and Climate Controls from these brands that fit a 2005 645Ci start at just $3.49 and are rated as high as 4.4 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2005 BMW 645Ci Cooling and Climate Controls

When it comes to maintaining or upgrading your 2005 BMW 645Ci, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Cooling and Climate Controls, specifically designed for the 2005 BMW 645Ci. With over 2 Carquest Premium brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $70.99, with an average price of just $160.49. Plus, with over 2 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $249.99

(1)

A/C Condenser and Receiver Drier Assembly

“I am grateful that K&N made an air filter for my 2009 KIA Borrego EX (3.8L V6). It has really helped in my vehicles performance. It has also helped in”

from $70.99

(1)

A/C Block Type O-Ring Expansion Valve

“Worked as described no issues”

Popular Mahle 2005 BMW 645Ci Cooling and Climate Controls

Mahle auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2005 BMW 645Ci owner should feel confident when installing genuine Mahle parts in their vehicle. To ensure the best fit and performance for your 2005 645Ci, Advance Auto Parts carries a full inventory of 1 Mahle Cooling and Climate Controls. Plus you will be keeping your BMW in peak condition while saving money because prices on these Mahle Cooling and Climate Controls range up to $3.49, plus, with more than 3 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $3.49

(3)

Engine Coolant Thermostat Housing Gasket

“Part installed easily and fit/functions well. No more noise from the front end.”

FAQs for 2005 BMW 645Ci Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2005 BMW 645Cis?

Out of 46 Cooling and Climate Controls that fit 2005 BMW 645Cis, the following parts are the top sellers:

Pressurized Coolant Reservoir: Black, Plastic, Original Equipment Replacement (11149779) – $117.99
Thermostatic Fan Control – Preset (3670008) – $46.99
Radiator Cap: 30 PSI (11357651) – $30.99

What’s the price range for 2005 BMW 645Ci Cooling and Climate Controls?

Cooling and Climate Control prices for the 2005 BMW 645Ci start at $2.99 and go up to $540.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2005 BMW 645Ci?

The average price for Cooling and Climate Controls for the 2005 BMW 645Ci is $110.45. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

What are the cheapest Cooling and Climate Controls for my 2005 BMW 645Ci?

The cheapest 2005 BMW 645Ci Cooling and Climate Controls we carry in stock are:

Engine Coolant Thermostat Housing Gasket (12588318) – $2.99
Engine Coolant Thermostat Housing Gasket (10599144) – $3.49
Engine Coolant Pipe O-Ring (12547542) – $6.29
Radiator Drain Cock Screw-In Type With Washer (50002914) – $7.49
Water Hose (11451552) – $19.99

What are the top-rated Cooling and Climate Controls that fit the 2005 BMW 645Ci?

Out of 106 reviews by customers, our 2005 BMW 645Ci Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2005 BMW 645Ci and their top-rated products:

Engine Cooling Parts
- Water Pump (20420888) – $145.99
- Engine Coolant Thermostat Housing Gasket (10599144) – $3.49
- Adjustable Thermostatic Fan Control (6016936) – $23.99

What types of Cooling and Climate Controls do you sell for my 2005 BMW 645Ci?

As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2005 BMW 645Ci:

Can I get help with 2005 BMW 645Ci Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Cooling and Climate Controls and more.

What is your return policy for BMW 645Ci Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new BMW 645Ci Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 BMW 645Ci Cooling and Climate Controls

Dorman – Automatic Transmission Oil Cooler Thermostat (Part No.902-5908)

KAI – Radiator Fan Assembly, 7/05-07 525/530I, 08 528I, 04-5 545I, 04-5 645I (Part No.BM3115107)

Driveworks Water Pumps – Water Pump (Part No.57-1688)

Dorman – Air Conditioning Pressure Sensor (Part No.904-611)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.6567)

Carquest Premium – Heater Core (Part No.910637)

Carquest Premium – HVAC Thermostatic Operated Electric Heater Valve (Part No.T74892)

Carquest Premium – Integrated Thermostat Housing (Part No.85956)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1496)

Rein – Expansion Tank (Part No.EPT0128)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39222)

Carquest Premium – A/C Desiccant Cartridge Kit (Part No.T83057)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10270)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26772)

Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.41-77548-00)

URO Parts – Collapsible Water Transfer Pipe Kit (Part No.11141439975PRM)

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T55391)

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA2118)

Victor Reinz – Engine Water Pump Gasket (Part No.71-17659-00)

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.606-221)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44032)

DENSO – A/C Compressor with Clutch – New (Part No.471-1490)

Carquest Premium – AC Pressure Sensor (Part No.ABA1128)

Rein – Cap-Expansion Tank (Part No.CPE0034)

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55332)

Carquest Premium – Engine Coolant Level Sensor (Part No.FFA1003)

Dorman – Help – Radiator Drain Cock Screw-In Type With Washer (Part No.61145)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39222)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.6567)

Carquest Premium – A/C Desiccant Cartridge Kit (Part No.T83057)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26772)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44032)

DENSO – A/C Compressor with Clutch – New (Part No.471-1490)

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T55391)

Carquest Premium – AC Pressure Sensor (Part No.ABA1128)

Dorman – Air Conditioning Pressure Sensor (Part No.904-611)

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55332)

Carquest Premium – HVAC Thermostatic Operated Electric Heater Valve (Part No.T74892)

Carquest Premium – Heater Core (Part No.910637)

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA2118)

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA1967)

Carquest Premium – Blower Motor: with Wheel (Part No.76935)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1496)

Dorman – HVAC Blower Motor Resistor (Part No.984-430)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.606-221)

Driveworks Water Pumps – Water Pump (Part No.57-1688)

MAHLE Original – Engine Coolant Thermostat Housing Gasket (Part No.C32504)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan, 14" Diameter (Part No.226114)

Dorman – Pressurized Coolant Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-351)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Motorad – Radiator Cap: 30 PSI (Part No.T-65)

Carquest Premium – Coolant Temperature Sensor 1TS1015 (Part No.WTC1038)

Carquest Premium – Engine Coolant Level Sensor (Part No.FFA1003)

Dorman – Automatic Transmission Oil Cooler Thermostat (Part No.902-5908)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10270)

Rein – Water Hose (Part No.CHE0481)

KAI – Radiator Fan Assembly, 7/05-07 525/530I, 08 528I, 04-5 545I, 04-5 645I (Part No.BM3115107)

Dorman – Auxiliary Coolant Pump (Part No.902-076)

Rein – Cap-Expansion Tank (Part No.CPE0034)

Carquest Premium – Engine Auxiliary Water Pump (Part No.T7090)

URO Parts – Collapsible Water Transfer Pipe Kit (Part No.11141439975PRM)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2283)

Rein – Expansion Tank (Part No.EPT0128)

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Carquest Premium – Integrated Thermostat Housing (Part No.85956)