2005 Audi A8 Quattro Tie Rods
More 2005 Audi A8 Quattro Tie Rods
Find your specific 2005 Audi A8 Quattro original or aftermarket Tie Rods below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2005 Audi A8 Quattro Tie Rods
Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010525448LEM)
from
$46.94
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
TRW – TRW Tie Rod End (Part No.M3010324830TRW)
from
$120.64
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW’s tie rod end joints includes the latest, high performance designs which incorporate the following features:
Product Features:
See More
Product Features:
- Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
- Low friction plastic bearings that enhance damping and reliability
- Manufactured using forged or cold formed steel
- Two-seat design is standard, and eliminates the need for a spring
- Top of the ball pins are polished
- Salt Spray Test (240hrs)
- Dynamic Test and Elasticity Test
- Original Equipment quality hardware installation accessories
- Acoustic measurements to ensure driver comfort
- Strength tests for durability
MOOG – Tie Rod End (Part No.EV801035)
from
$44.49
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Polished Stud ball provides low socket torque.
- Stud design is optimized to provide ideal stud swing and strength for each application.
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
MOOG – Tie Rod End (Part No.ES800680)
from
$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Restores like-new steering and handling
- Coated for corrosion resistance
- Loose or worn chassis parts can lead to premature tire wear
- Construction and design validated by MOOG engineers
- Engineered to provide long life and dependability
- Includes any necessary hardware
MOOG – Tie Rod End (Part No.EV800390)
from
$60.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Polished Stud ball provides low socket torque.
- Stud design is optimized to provide ideal stud swing and strength for each application.
MOOG – Steering Tie Rod End (Part No.EV440)
from
$48.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Assembled in the USA
Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010525588LEM)
from
$55.15
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Delphi – Tie Rod End (Part No.M3010304900DEL)
from
$34.29
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
Product Features:
See More
Product Features:
- Delphi tie rods are fatigue tested to avoid failure
- Delphi includes the necessary accessories for a complete job
- Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
- Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
Delphi – Tie Rod End (Part No.M3010324832DEL)
from
$37.98
Tie Rod End
MOOG – Tie Rod End (Part No.ES3646)
from
$62.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Rare Parts – Tie Rod End (Part No.RP29502)
from
$79.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Febi – Tie Rod (Part No.M3001285226FEB)
from
$35.94
FEBI Tie rods strictly comply with the specification of the manufacturers providing; quality, performance and exact fitment. The FEBI tie rods ensures a comfortable driving experience and to prevent high-frequency vibrations being transferred to other parts.
Product Features:
See More
Product Features:
- Original Equipment Manufacturer
- Larger diameter to increase the load carrying capacity
- Outstanding slide properties
TRW – TRW Tie Rod (Part No.M3001285226TRW)
from
$88.01
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.
Product Features:
See More
Product Features:
- Low friction plastic bearings that enhance damping and reliability
- Manufactured using forged or cold formed steel
- Salt Spray Test (240hrs)
- Dynamic Test and Elasticity Test
- Original Equipment quality hardware installation accessories
- Acoustic measurements to ensure driver comfort
- Strength tests for durability
- Environmental resistance tests for all weather conditions
- Wear and drive tests
- Assembly technique testing of all critical safety features
International Suspension Group – Tie Rod End (Part No.M3010324832ISG)
from
$34.53
Tie Rod End
Rare Parts – Tie Rod Assbly (Part No.RP29443)
from
$149.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rein – Tie Rod (Part No.SCT0296R)
from
$54.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
MOOG – Tie Rod End Assembly (Part No.ES3681A)
from
$125.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Loose or worn chassis parts can lead to premature tire wear
- Assembly includes inner and outer tie rods for quick and complete repair
- Incorporates proven design and engineering features
- Easy access wrench flat allows for use of a socket for easy installation and removal
Popular 2005 Audi A8 Quattro Tie Rods Categories
2005 Audi A8 Quattro Tie Rods
Maybe you’re in the middle of a full rebuild of that 2005 Audi A8 Quattro. Maybe you just need a couple of Tie Rods. Either way, Advance Auto Parts has 7 different Tie Rods in our inventory ranging from $35.94 to $149.99. That means you can find the exact parts or products you need to keep that 2005 Audi A8 Quattro running smoothly.
Tie Rods are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2005 Audi A8 Quattro. Moog, Rare, and TRW are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Tie Rods for your 2005 Audi A8 Quattro, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Tie Rods to keep your 2005 Audi A8 Quattro rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Tie Rods Brands To Make Your 2005 Audi A8 Quattro Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 Audi A8 Quattro demands trusted brand parts and products to keep it running. Many trusted brands of Tie Rods make up Advance Auto Parts’ inventory, and all are ready to help make your A8 Quattro the best it can be. Be sure to browse some of our top Tie Rods brands and parts.
FAQs for 2005 Audi A8 Quattro Tie Rods
What are the most purchased Tie Rods for the 2005 Audi A8 Quattro?
Out of 7 Tie Rods for the 2005 Audi A8 Quattro, the most popular in our inventory are:
