from

$101.99

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

from

$164.63

Flywheel

from

$163.99

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$147.11

Clutch Master Cylind

from

$37.99

Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$78.32

The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$145.39

Engineered to exacting OE Specifications, The AISIN Pressure Plate is designed to deliver optimal drivetrain efficiency. One of AISIN’s unique and innovative technologies, the NVR (Noise Vibration Reduction) Clutch proves performance and environmental awareness can go hand in hand. The NVR clutch system has been adopted into the automotive industry as Original Equipment.

Product Features:

OE Quality and a direct fit application.
Reduced lever wear by heat treated diaphragm spring.
AISIN’s Hot Seating process stabilizes performance of the diaphragm spring.
Diaphragm Spring Turnover (DST) type cover improves release of pressure plate.
Higher load capacity, achieved by the latest designs enables an increase in vehicle application.
Improved shudder resistance by enhanced accuracy in both the bearing adherence strength and pressure plates movement.

from

$117.58

Engineered to exacting OE Specifications, The AISIN Pressure Plate is designed to deliver optimal drivetrain efficiency. One of AISIN’s unique and innovative technologies, the NVR (Noise Vibration Reduction) Clutch proves performance and environmental awareness can go hand in hand. The NVR clutch system has been adopted into the automotive industry as Original Equipment.

Product Features:

OE Quality and a direct fit application.
Reduced lever wear by heat treated diaphragm spring.
AISIN’s Hot Seating process stabilizes performance of the diaphragm spring.
Diaphragm Spring Turnover (DST) type cover improves release of pressure plate.
Higher load capacity, achieved by the latest designs enables an increase in vehicle application.
Improved shudder resistance by enhanced accuracy in both the bearing adherence strength and pressure plates movement.

from

$131.41

Engineered to exacting OE Specifications, The AISIN Pressure Plate is designed to deliver optimal drivetrain efficiency. One of AISIN’s unique and innovative technologies, the NVR (Noise Vibration Reduction) Clutch proves performance and environmental awareness can go hand in hand. The NVR clutch system has been adopted into the automotive industry as Original Equipment.

Product Features:

OE Quality and a direct fit application.
Reduced lever wear by heat treated diaphragm spring.
AISIN’s Hot Seating process stabilizes performance of the diaphragm spring.
Diaphragm Spring Turnover (DST) type cover improves release of pressure plate.
Higher load capacity, achieved by the latest designs enables an increase in vehicle application.
Improved shudder resistance by enhanced accuracy in both the bearing adherence strength and pressure plates movement.

from

$149.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$707.99

Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$391.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$41.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$52.08

The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$69.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$45.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$68.09

NACHI Self-aligning Clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:

Design for high temperature, and high rotating speed.
Design for exclusive use in manual transmission clutch.
Designed with aligning function and positioning features .
Low-friction factor resin reduces rotation abrasion of the axle.

from

$66.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Design improvements include extended life and quiet operation
Industry leading coverage
Professional technicians know they can depend on National

from

$46.55

Koyo designs, manufacturers and supplies a wide range of ball and roller bearings to the world’s leading automotive manufacturers. Koyo clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:

Extended service life
Compact, lightweight design
Sealed for life with high performance, application-specific grease
Integrated functionality
Design for high temperature, and high rotating speed

from

$77.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Design improvements include extended life and quiet operation
Industry leading coverage
Professional technicians know they can depend on National

from

$73.81

EXEDY Engineers develop, perfect and manufacture our own friction materials. We produce a material with exceptional friction and wear characteristics that will help engage smoothly, grip as expected and provide you with a longer lasting installation. Disc Spring Dampers: This is the center section of the clutch disc. EXEDY spring-type disc dampers are patented worldwide to suppress engine and driveline noise by absorbing vibrations.

Product Features:

OE Quality
Direct fit application
Noise and vibration reduction technology reduces gear noise providing a quite smooth ride
Wide angle damper design enables the clutch disc to hold more torque with less force
Quiet pre-damper mechanism reduces gear noise during engine idle

from

$109.92

Engineered to exacting OE Specifications, The AISIN Clutch Disc is designed to deliver optimal drivetrain efficiency. One of Asian’s unique and innovative technologies, the NVR (Noise Vibration Reduction) Clutch proves performance and environmental awareness can go hand in hand. The NVR clutch system has been adopted into the automotive industry as Original Equipment.

Product Features:

OE Quality and a direct fit application.
Improved product life by adopting facings with excellent heat and wear resistance.
Clutch drag prevented by using circumferential grooves in the facings and ensuring sufficient groove depth.
Improved spline sliding properties by using nickel coated splines.
Smoother clutch engagement by adopting facings with excellent anti-shudder properties.
Reduced drive system vibration and noise through the use of a rigid clutch disc structure and reduced deflection of immobile cushion rubbers.