2004 Toyota Solara Transmission Parts

Below you will find various in-demand Toyota Transmission Parts, components and accessories for your 2004 Solara. Advance Auto Parts has popular Solara parts like Automatic Transmission Parts, Transmission Cooler and Parts, Transmission Mounts and more. You’ll also find aftermarket and OEM Transmission Parts for other Solara model years including 1999, 2000, 2001, 2002, 2003, 2005, 2006, 2007, 2008 and more. Select a category of 2004 Toyota Solara Transmission Parts below and start saving instantly.

Popular 2004 Toyota Solara Transmission Parts Categories

Manual Transmission Shift Cables

OE Transmission Coolers

Torque Strut Mounts

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Automatic Transmission Shift Solenoids

Transmission Pan Gaskets

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Transmission Rebuild Kits

Speed Sensors

Transmission Speed Sensors

Automatic Transmission Output Shaft Seals

Pinion Seals

Miscellaneous Shift Shaft Seals

Transmission Seals and O-rings

Transmission Oil Pan Kits

Back Up Light Relays

Torque Converter Seals

Manual Transmission Output Shaft Seals

Shaft Seals

Automatic Transmission Drive Axle Seals

Manual Trans Drain Plug Gaskets

Essential Transmission Parts for 2004 Toyota Solaras

from

$829.99

AT MASTER REPAIR KIT

from

$40.99

Product Features:

Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.

from

$10.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$12.99

AT SEAL DRIVE AXLE

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$105.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 02-03;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2002-2003
Weight approx: 5 Lbs
HYDRAULIC

from

$308.99

Manufactured from durable materials, this manual transmission shift linkage bushing matches the fit and function of the original bushing.

Product Features:

Direct replacement – this manual transmission shift linkage bushing matches the fit and function of the original part
Ideal solution – designed and manufactured to ensure a seamless installation
Durable construction – manufactured from quality materials for reliable service
Trustworthy design – backed by a company with more than 100 years of automotive aftermarket experience

from

$585.99

AT CONTR SOLENOID

from

$6.49

Product Features:

Brand may vary by location

from

$297.99

Shift Solenoid

from

$13.99

AT OIL PAN GASKET

from

$151.99

This automatic transmission speed sensor matches the fit and function of the original equipment sensor to restore critical speed-dependent vehicle functions. This part has been engineered and rigorously tested to ensure reliable performance.

Product Features:

Direct replacement – this automatic transmission speed sensor matches the fit and function of the original equipment sensor
Durable construction – this sensor is engineered to precise standards to ensure accurate signal output
Easy installation – this sensor is installed using the original hardware and plugs into the vehicle’s existing wiring
Quality tested – this part has undergone try-on validation and rigorous quality testing to ensure a quality fit and long service life

from

$19.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.99

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$14.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$4.29

These automatic transmission drain plug gaskets are designed to match the fit and function of the original gaskets required to repair the drain plug on specified vehicles, and are made of durable materials for reliable service.

Product Features:

Direct replacement – these automatic transmission drain plug gaskets are designed to match the fit and function of the original gasket required to repair the plug on specified vehicles
Ideal solution – recommended for replacement when transmission is serviced, or for an original gasket that is leaking
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$87.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$15.99

Product Features:

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$10.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$20.62

Automatic Transmission Seal

from

$185.99

Manual Transmission Shift Cable

from

$173.99

Manual Transmission Shift Cable

from

$183.99

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$153.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$76.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 02-03;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2002-2003
Weight approx: 3 Lbs
WITH WEIGHT

from

$41.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 97-01;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1997-2001
Weight approx: 2 Lbs

Upgrade your 2004 Toyota Solara with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2004 Toyota Solara, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Transmission Parts are key to keeping your Solara functioning at its best. At Advance Auto Parts, we offer a wide selection of 51 Transmission Parts for the 2004 Toyota Solara, designed to meet your needs without breaking the bank. From Automatic Transmission Part replacements to Transmission Cooler and Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2004 Toyota Solara at great prices. Our Transmission Parts inventory for this model ranges from just $4.29 to $2,323.99, with an average price of $213.09. Our 51 Transmission Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 2004 Toyota Solara without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Toyota Solara, we stock popular OEM and aftermarket Transmission Parts from top names like National, Imperial, Anchor, and more. National Transmission Parts start at just $16.99 and boast an impressive 4.3 stars average rating from customers. Imperial and Anchor also bring quality to the table, with Transmission Parts available starting at $61.99, and at an average 4.1 stars rating. With 588 customer reviews and counting, our 2004 Toyota Solara Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Toyota Solara is always ready to roll. We’re committed to providing you with everything you need to keep your Solara in top shape, all in one place. Start shopping confidently below for your 2004 Toyota Solara!

Best-Selling Automatic Transmission Parts for 2004 Toyota Solaras

Enhance the driving experience in your Toyota with 7 quality Automatic Transmission Part components, starting at $189.99.

show more show less

from

$507.99

AT CONTR SOLENOID

from

$189.99

Shift Solenoid

from

$2323.99

AT CONTR SOLENOID

from

$669.99

AT CONTR SOLENOID

from

$559.99

AT CONTR SOLENOID

from

$502.99

AT CONTR SOLENOID

from

$383.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

Most Popular 2004 Toyota Solara Transmission Cooler and Parts

Customize your Toyota with 10 Transmission Cooler and Parts products like Transmission Oil Cooler Lines and OE Transmission Coolers, all priced under $85.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

Top Picks for 2004 Toyota Solara Transmission Mounts

Upgrade Toyota Solaras with top-quality Transmission Mounts parts, including 3 OEM and aftermarket selections for your 2004 model.

show more show less

from

$99.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to LEXUS 02-17; TOYOTA 01-18;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2001-2018
Weight approx: 5 Lbs
HYDRAULIC

from

$29.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 02-08;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2002-2008
Weight approx: 2 Lbs

from

$103.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 02-09;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2002-2009
Weight approx: 4 Lbs

In-Demand Automatic Transmission Pan and Gaskets for 2004 Toyota Solaras

Select from 3 premium Automatic Transmission Pan and Gaskets parts for your 2004 Toyota Solara, with prices ranging from $11.49 to $87.99.

show more show less

from

$11.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$87.99

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$75.99

Rein Automotive OE quality oil pan kits are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil pans are designed to tight tolerances to ensure proper sealing. Kits include OE quality gaskets or Ajusil silicone sealant where the OE pans do not use a gasket. Kits include new drain plugs.

Product Features:

Includes OE quality gaskets or Ajusil silicone sealant.
Includes new drain plugs.
Designed to tight tolerances to ensure proper sealing.

Most Sold 2004 Toyota Solara Transmission Seals

Explore our best-selling Toyota parts for the 2004 Solara among 12 OEM and aftermarket options starting from $6.49.

show more show less

from

$16.99

Design type: spring loaded; multi-lip
Temperature range: – 0 Deg. F to 450 Deg. F / – 3 Deg. C to 232 Deg. C
Excellent dry running capabilities
Low coefficient of friction
Delivers quality and reliable performance for every type of repair

from

$15.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$14.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.99

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$13.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$14.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$15.99

Product Features:

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.79

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$19.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.49

Product Features:

Brand may vary by location

from

$6.49

Product Features:

Brand may vary by location

from

$14.49

AT SEAL DRIVE AXLE

Top-Rated Transmission Parts Brands For Your 2004 Toyota Solara

Shop for the best-rated brands offering Transmission Parts and other products for your 2004 Toyota Solaras. Below you’ll find some of our best rated Transmission Parts from National, Imperial, and Anchor, and more. Transmission Parts from these brands that fit a 2004 Solara start at just $16.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 2004 Toyota Solara Transmission Parts

When it comes to maintaining or upgrading your 2004 Toyota Solara, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 2004 Toyota Solara. With over 1 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $16.99. Plus, with over 2 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $16.99

(2)

Automatic Transmission Output Shaft Seal

“Es un sellador multiuso”

Popular Imperial 2004 Toyota Solara Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 2004 Toyota Solara owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 2004 Solara, Advance Auto Parts carries a full inventory of 3 Imperial Transmission Parts. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Imperial Transmission Parts range from $61.99 to $85.99, plus, with more than 14 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $73.99

(7)

Maxi-Kool® XL Transmission Oil Cooler

“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”

from $85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

from $61.99

(3)

Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11"

“Bought these before for my vehicles. Put this one on a Silhouette and by-passed the in-radiator cooler altogether. Haven’t put a thermometer on it t”

FAQs for 2004 Toyota Solara Transmission Parts

Which Transmission Parts are best-sellers for 2004 Toyota Solaras?

Out of 51 Transmission Parts that fit 2004 Toyota Solaras, the following parts are the top sellers:

Multi-Purpose Seal (18444925) – $15.99
Transmission Oil Cooler Reinstallation Kit (5670023) – $25.99
A/C Compressor Clutch Relay (19970028) – $40.99

What’s the price range for 2004 Toyota Solara Transmission Parts?

Transmission Part prices for the 2004 Toyota Solara start at $4.29 and go up to $2,323.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2004 Toyota Solara?

The average price for Transmission Parts for the 2004 Toyota Solara is $213.09. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Toyota Solara model years?

Yes, we currently carry Transmission Parts for 8 model years of Toyota Solaras between 1999 and 2008. Transmission Parts are bought most frequently for the following model years: 2008, 2007, 2006, 2005, 2003, 2002, 2001, 2000, and 1999.

What are the cheapest Transmission Parts for my 2004 Toyota Solara?

The cheapest 2004 Toyota Solara Transmission Parts we carry in stock are:

Differential, Transmission Drain And Fill Plug Crush Washers, Size 18mm (50247702) – $4.29
Auto Transmission Manual Shaft Seal (11494069) – $6.49
Manual Transmission Output Shaft Seal (11468572) – $8.49
Multi Purpose Seal (3267415) – $8.79
Oil Seal (3267393) – $10.29

What are the top-rated Transmission Parts that fit the 2004 Toyota Solara?

Out of 588 reviews by customers, our 2004 Toyota Solara Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2004 Toyota Solara and their top-rated products:

Automatic Transmission Pan and Gaskets
- Transmission Oil Pan Gasket 18 Bolt Hole One Piece Gasket (15780957) – $11.49

What types of Transmission Parts do you sell for my 2004 Toyota Solara?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 2004 Toyota Solara:

Can I get help with 2004 Toyota Solara Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Transmission Parts and more.

What is your return policy for Toyota Solara Transmission Parts?

Advance Auto Parts keeps returns simple. For new Toyota Solara Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Toyota Solara Transmission Parts

ATP – AT MASTER REPAIR KIT (Part No.RM-49)

Carquest – A/C Compressor Clutch Relay (Part No.R3130)

FAG US – Shaft Seal (Part No.SS2615)

ATP – AT SEAL DRIVE AXLE (Part No.RO-54)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Anchor – Transmission Mount: Left, 1 Piece (Part No.9576)

Dorman – Gearshift Control Cable Assembly (Part No.905-628)

ATP – AT CONTR SOLENOID (Part No.RE-63)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

ATP – Shift Solenoid (Part No.RE-18)

ATP – AT OIL PAN GASKET (Part No.RG-40)

Dorman – Transmission Output Speed Sensor (Part No.917-603)

National – Multi-Purpose Seal (Part No.710733)

National – Multi Purpose Seal (Part No.221207)

National – Multi-Purpose Seal (Part No.223010)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Dorman – Differential, Transmission Drain And Fill Plug Crush Washers, Size 18mm (Part No.652-531CD)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 10 Quart (Part No.265-836)

National – Multi Purpose Seal (Part No.1987)

Driveworks – Oil Seal (Part No.S-224026)

Driveworks – Oil Seal (Part No.S-223830)

Koyo – Automatic Transmission Seal (Part No.J507048821KOY)

ATP – Manual Transmission Shift Cable (Part No.Y-1538)

ATP – Manual Transmission Shift Cable (Part No.Y-1542)

Carquest Premium – Vehicle Speed Sensor (Part No.SNA1227)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC1282)

Anchor – Torque Strut Motor Mount: Right, 1 Piece (Part No.9504)

Anchor – Torque Strut Motor Mount: Right, 1 Piece (Part No.8698)

ATP – AT CONTR SOLENOID (Part No.RE-9)

ATP – Shift Solenoid (Part No.RE-26)

ATP – AT CONTR SOLENOID (Part No.RE-71)

ATP – AT CONTR SOLENOID (Part No.RE-37)

ATP – AT CONTR SOLENOID (Part No.RE-8)

ATP – AT CONTR SOLENOID (Part No.RE-7)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCA1402)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Anchor – Transmission Mount: Left, 1 Piece (Part No.9165)

Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.9492)

Anchor – Transmission Mount: Left, 1 Piece (Part No.9707)

Felpro – Transmission Oil Pan Gasket 18 Bolt Hole One Piece Gasket (Part No.TOS 18719)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 10 Quart (Part No.265-836)

Rein – Oil Pan Kit (Part No.ESK0215)

National – Automatic Transmission Output Shaft Seal (Part No.710732)

National – Multi-Purpose Seal (Part No.712551)

National – Multi-Purpose Seal (Part No.710112)

National – Multi Purpose Seal (Part No.221207)

National – Multi Purpose Seal (Part No.710731)

National – Multi-Purpose Seal (Part No.223010)

National – Multi Purpose Seal (Part No.1987)

National – Multi Purpose Seal (Part No.224020)

National – Multi-Purpose Seal (Part No.710733)

Driveworks – Manual Transmission Output Shaft Seal (Part No.S-710112)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

ATP – AT SEAL DRIVE AXLE (Part No.RO-79)