2004 Toyota MR2 Spyder Air Intakes

Essential 2004 Toyota MR2 Spyder Air Intakes

Carquest Premium – Fuel Injector Seal Kit (Part No.AS024A)

Fuel Injector Seal Kit

from

$5.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Carquest Premium – Door Lock Motor Connector (Part No.PTC1427)

Door Lock Motor Connector

from

$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Throttle Position Sensor (Part No.ECC1066)

Throttle Position Sensor

from

$71.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Aisan – Throttle Position Sensor (Part No.C7012167143AIS)

Throttle Position Sensor

from

$65.67
Throttle Position Sensor

Carquest Premium – Throttle Sensor (Part No.ECC1087)

Throttle Sensor

from

$99.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61134)

Fuel Injection Throttle Body Mounting Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

MAHLE Original – Intake Manifold Gasket Set (Part No.MS19590)

Intake Manifold Gasket Set

from

$6.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Intake manifold gasket contains manifold gasket needed to replace an intake manifold.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 93942)

INTAKE MANIFOLD GASKET SET

from

$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Includes all parts needed to complete the repair
  • Includes all parts needed to complete the repair
See More

Dorman – Electronic Throttle Body: New (Part No.977-855)

Electronic Throttle Body: New

from

$551.99
When a vehicle idles roughly, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles. It features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures.

Product Features:
  • Direct replacement – this 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles
  • Ideal solution – engineered to help restore proper engine performance when the factory throttle body is malfunctioning due to oil ingress or dirt and carbon buildup, resulting in DTCs and rough idling
  • Upgraded construction – features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1005)

Coolant Temperature Sensor

from

$25.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Autopart International Inc – Intake Manifold (Part No.B12001984796API)

Intake Manifold

from

$301.24
Intake Manifold

Dorman – Upper Plastic Intake Manifold – Includes Gaskets (Part No.615-560)

Upper Plastic Intake Manifold - Includes Gaskets

from

$342.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.

Product Features:
  • Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
  • Reliable construction – tested to ensure top-quality OEM performance and durability
  • Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
  • Trustworthy design – built by the industry leader in aftermarket manifolds
See More

2004 Toyota MR2 Spyder Air Intakes

You count on your 2004 Toyota MR2 Spyder to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 11 Air Intakes ranging in price from $5.29 to $551.99, you’re sure to find everything you need for your 2004 Toyota MR2 Spyder.

Brands matter. If you want to shop a specific Air Intakes brand, we stock 6 different brands like Carquest Premium, Felpro, and Mahle. 2004 Toyota MR2 Spyder Air Intakes start as low as $5.29!

One of the best ways to find top quality OEM or aftermarket Air Intakes is by asking professionals. Short of that, you can shop with confidence thanks to our 37 extensive product reviews on 2004 Toyota MR2 Spyder Air Intakes. Some of the top-rated Air Intakes products we carry are Upper Plastic Intake Manifold – Includes Gaskets with 2.0 stars.

Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 2004 Toyota MR2 Spyder below to get started!

Top-Rated Air Intakes Brands For Your 2004 Toyota MR2 Spyder

Trusted Air Intakes OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Toyota MR2 Spyder running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, Mahle, and even more.

Popular Felpro Air Intakes

You’ll find popular Felpro brand products across Throttle Bodies & Carb Parts and Intake Manifold Parts. All are waiting to get your 2004 Toyota MR2 Spyder back on the road. Some of the top-rated Felpro products in these categories are:
Fuel Injection Throttle Body Mounting Gasket
from $6.79
(4)
Fuel Injection Throttle Body Mounting Gasket
Throttle Body Mounting Gaskets
INTAKE MANIFOLD GASKET SET
from $9.99
(14)
INTAKE MANIFOLD GASKET SET
Intake Manifold Gasket Sets

FAQs for 2004 Toyota MR2 Spyder Air Intakes

What are the most purchased Air Intakes for the 2004 Toyota MR2 Spyder?

Out of 11 Air Intakes for the 2004 Toyota MR2 Spyder, the most popular in our inventory are:
Fuel Injector Seal Kit
from $5.29
(14)
Fuel Injector Seal Kit
Carburetor and Injector Seal Kits
Coolant Temperature Sensor
from $25.99
This product is not rated
Coolant Temperature Sensor
Intake Manifold Temperature Sensors
Intake Manifold Gasket Set
from $6.49
(4)
Intake Manifold Gasket Set
Intake Manifold Gasket Sets

What are the top-rated 2004 Toyota MR2 Spyder Air Intakes?

Top-rated Air Intakes for your 2004 Toyota MR2 Spyder based on customer reviews/ratings are:
Upper Plastic Intake Manifold - Includes Gaskets
from $342.99
(1)
Upper Plastic Intake Manifold – Includes Gaskets
“1st- for the 2005 1.8L toyota engine I have, non-drive by wire. I needed to purchase two 8×45 bolts. 2nd- all capture nuts are brass. Easily strippe”