2004 Sterling Truck Acterra Fuel and Emissions Systems
More 2004 Sterling Truck Acterra Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2004 Sterling Truck Acterra, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2004 Sterling Truck Acterra Fuel and Emissions Systems
Carquest Premium – Fuel/Water Separator Element for Optimal Fuel Filtration & Engine Protection (Part No.86585XE)
from
$40.49
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86406)
from
$41.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Application engineered media which aids in stripping water in diesel fuels
- Patent pending drain, metal end caps, which hold media in place
- Rust resistant can, ensuring no leakage from inside
- Made in USA
- Includes Standpipe
- CAUTION: Furnished D-Ring must be installed on post for seal.
Carquest Premium – Fuel/Water Separator Spin-on with Drain, Square Sensor Port and Reusable Sensor (Part No.86604)
from
$81.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
- Includes Standpipe. Sensor Port Thread: M14 x 2.0
- CAUTION: Furnished O-Ring must be installed on post for seal. For use with Deutz square sensor.
Carquest Premium – Fuel/Water Separator Spin-on with Drain, Oval Sensor Port and Reusable Sensor (Part No.86422)
from
$59.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Contains Sensor Port Thread: M14 x 2.0;Standpipe
- Includes Standpipe. Sensor Port Thread: M14 x 2.0
- CAUTION: Furnished D-Ring must be installed on post for seal. NOT Interchangeable with 86604.
Delphi – Fuel Injector (Part No.EX634761)
from
$700.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX630781)
from
$359.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX639350)
from
$373.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX634762)
from
$724.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Dorman – HD Solutions – EGR Cooler V-Band Clamp (Part No.904-5154)
from
$59.99
This exhaust gas recirculation (EGR) cooler clamp is designed to match the fit of the original clamp on specified vehicles and is recommended for replacement during EGR cooler service. It is engineered from stainless steel for reliable service life.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust gas recirculation (EGR) cooler clamp is designed to match the fit of the original clamp and is recommended for replacement during EGR cooler service
- Ideal solution – engineered from stainless steel to withstand extreme heat and to resist corrosion
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – HD Solutions – Intake Manifold Temp Sensor (Part No.904-7044)
from
$39.49
Dorman offers a variety of some of today’s most popular Multi-Purpose Sensors for measuring several types of temperature in the vehicle. Our direct replacement Multi-Purpose Sensor is ideal for measuring coolant and auto transmission temperature. Each replacement restores proper vehicle operation and provides a longer service life. Plus, these direct fit Sensors are affordable and easy to install.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Replacement prevents any further damage to vehicle engine
- No special tools required during installation
- Thoroughly tested to meet product standards and quality
Popular 2004 Sterling Truck Acterra Fuel and Emissions Systems Categories
2004 Sterling Truck Acterra Fuel and Emissions Systems
You count on your 2004 Sterling Truck Acterra to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 9 Fuel and Emissions Systems ranging in price from $39.49 to $724.99, you’re sure to find everything you need for your 2004 Sterling Truck Acterra.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 3 different brands like Carquest Premium, Delphi, and Dorman. 2004 Sterling Truck Acterra Fuel and Emissions Systems start as low as $39.49!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 2 extensive product reviews on 2004 Sterling Truck Acterra Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2004 Sterling Truck Acterra below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2004 Sterling Truck Acterra
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Sterling Truck Acterra running right for years to come. In our inventory you’ll find brands like Carquest Premium, Delphi, Dorman, and even more.
Popular Carquest Premium Fuel and Emissions Systems
You’ll find popular Carquest Premium brand products across Fuel Pumps. All are waiting to get your 2004 Sterling Truck Acterra back on the road. Some of the top-rated Carquest Premium products in these categories are:
FAQs for 2004 Sterling Truck Acterra Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2004 Sterling Truck Acterra?
Out of 9 Fuel and Emissions Systems for the 2004 Sterling Truck Acterra, the most popular in our inventory are:
from
$81.99
This product is not rated
Fuel/Water Separator Spin-on with Drain, Square Sensor Port and Reusable Sensor
Fuel and Water Separators
from
$59.99
This product is not rated
Fuel/Water Separator Spin-on with Drain, Oval Sensor Port and Reusable Sensor
Fuel and Water Separators
