2004 Nissan Frontier Drivetrains

Essential 2004 Nissan Frontier Drivetrains

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6071)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$92.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 02-06; CHEV 97-12; DODGE 03-06; FORD 11-15; GMC 96-12; NISSAN 04-22;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1996-2022
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • WITHOUT PLATE
  • WITHOUT STUDS
  • EXTENDED DUST SHIELD
See More

Yukon Gear – Master Overhaul Kit For Nissan Titan Rear Differential (Part No.14172)

Master Overhaul Kit For Nissan Titan Rear Differential

from

$459.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Nissan Titan rear
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and silicone.
See More

Felpro – Differential Carrier Gasket (Part No.RDS 27274)

Differential Carrier Gasket

from

$9.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter (Part No.614-003)

Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter

from

$32.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Replacement Pinion Flange For Dana 44, ’08 & Up Nissan Titan Rear (Part No.41187)

Replacement Pinion Flange For Dana 44, '08 & Up Nissan Titan Rear

from

$178.99
Product Features:
  • Fits Nissan Titan rear
  • 24 spline
  • Round companion flange
See More

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Rugged Ridge – Locking Hub (Part No.15001.61)

Locking Hub

from

$357.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r

Product Features:
  • Impact Resistant Nodular Iron
  • Corrosion Resistant
  • Better 4WD Performance
  • Better Fuel Economy
  • Easy Install
See More

Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)

Dana 20 / 44 Axle Bearing And Seal Kit Replacement

from

$123.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
  • Includes axle bearing and seal
  • Services one side
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53127)

CV Axle Shaft Assembly

from

$132.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Spartan Spring & Pin Kit, Fits Smaller Designs

from

$26.99
Spartan spring & pin kit, fits smaller designs.

Product Features:
  • Replacement spring and pin kit for Spartan Locker
  • Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
  • Includes 4 springs and 4 alignment pins
See More

National – Multi Purpose Seal (Part No.225040)

Multi Purpose Seal

from

$7.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Serrated Wheel Stud (Part No.O8060832868DOR)

Serrated Wheel Stud

from

$3.32
When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Dorman’s engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:
  • Direct replacement for a proper fit every time
  • Corrosion resistant
  • Double-ended studs as well as serrated bolts, and wheel bolts available
  • Over-length and under-length studs available for convenience and ease of installation
See More

Yukon Gear – Ring Gear Bolt, 1/2" (Part No.33036)

Ring Gear Bolt, 1/2"

from

$10.99
Ring gear bolt for Jeep JK front & rear and Nissan Titan rear, 1/2″.

Product Features:
  • Ring gear bolt for Jeep JK front and Nissan Titan rear
  • 1/2″ bolt
See More

National – Multi Purpose Seal (Part No.710922)

Multi Purpose Seal

from

$19.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Compatible with most oils and EP lubricants at higher operating temperatures
  • High resistance to oxidation and ozone and has low swell in hydrocarbon fluids
  • Temperature range: -20°F to 300°F; -29°C to 149°C
  • National® oil seals are recognized worldwide for their quality and reliable performance for every type of repair.
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

National – Bearings (Part No.205)

Bearings

from

$20.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Seal (Part No.710665)

Multi Purpose Seal

from

$15.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Felpro – Differential Carrier Gasket (Part No.RDS 55330)

Differential Carrier Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

National – Bearings (Part No.32306-C)

Bearings

from

$48.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread

from

$7.99
Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
  • 7/8″ x 14 thread
  • 1 5/16″ socket
See More

Ohno – CV Joint Boot Kit (Part No.K6010151661OHN)

CV Joint Boot Kit

from

$26.94
The Ohno CV Joint Boot Kit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354C)

Greaseable Premium Universal Joint

from

$34.99
Backed by superior materials and rigorous testing, MOOG Anti-Galvanic universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installations.

Product Features:
  • INHIBITS GALVANIC REACTION — Designed specifically for aluminum yokes to avoid a galvanic reaction that leads to corrosion
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • CORROSION PROTECTION — Bearing cups and snap rings are chemically-coated to protect aluminum yokes
  • KEEPS DIRT OUT — Nitrile rubber grease seals with double lip design protects components from wear-causing contaminants
  • GREASABLE DESIGN — Radial design of bearing cups allows 360 Degrees lubricant distribution to all bearing surfaces to flush out contaminants and moisture to reduce corrosion and wear
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

SKF – Driveshaft Support with Bearing (Part No.K1030153167SKF)

Driveshaft Support with Bearing

from

$207.39
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.

Product Features:
  • OE Quality, fit and performance
  • Precise driveshaft alignment and support
  • Pre-lubricated and sealed
  • Metal reinforced seals to prevent contamination
  • Manufactured from durable rubber compounds
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 55388)

Axle Housing Cover Gasket

from

$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)

Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm

from

$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

2004 Nissan Frontier Drivetrains

You count on your 2004 Nissan Frontier to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 108 Drivetrains ranging in price from $2.12 to $1,180.00, you’re sure to find everything you need for your 2004 Nissan Frontier.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 23 different brands like Valvoline, Moog, and Driveworks. 2004 Nissan Frontier Drivetrains start as low as $2.12!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,390 extensive product reviews on 2004 Nissan Frontier Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Non-Greaseable Super Strength Universal Joint with 4.3 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2004 Nissan Frontier below to get started!

Top-Rated Drivetrains Brands For Your 2004 Nissan Frontier

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Nissan Frontier running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

Popular Motive Gear Drivetrains

You’ll find popular Motive Gear brand products across Differentials. All are waiting to get your 2004 Nissan Frontier back on the road. Some of the top-rated Motive Gear products in these categories are:
Differential Pinion Shim Kit
from $7.49
(1)
Differential Pinion Shim Kit
Differential Pinion Shims

Top-Rated Valvoline Drivetrains


If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Drivetrains for your 2004 Nissan Frontier, and some of our most reviewed Valvoline parts include:
ATF for Mercon®V Applications Conventional, 1 Quart
from $12.99
(120)
ATF for Mercon®V Applications Conventional, 1 Quart
Differential Oil

FAQs for 2004 Nissan Frontier Drivetrains

What are the most purchased Drivetrains for the 2004 Nissan Frontier?

Out of 108 Drivetrains for the 2004 Nissan Frontier, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints
Bearings
from $16.99
(39)
Bearings
Axle Shaft Bearings

What are the top-rated 2004 Nissan Frontier Drivetrains?

Top-rated Drivetrains for your 2004 Nissan Frontier based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
Non-Greaseable Super Strength Universal Joint
from $32.99
(28)
Non-Greaseable Super Strength Universal Joint
“installed as needed”
Universal Joint
from $28.99
(12)
Universal Joint
“No problems with Installation and appears to be quality part! Great for my old School Street Car!”