from

$60.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Heat/abrasion tubing protects vital areas

from

$219.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$7.65

The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$31.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$91.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$147.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Heavy-duty design
Loose or worn chassis parts can lead to premature tire wear
Engineered steel composition results in a stronger component
Powdered metal gusher bearing design enables grease to flow through bearing to
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$14.49

Covered in black Hypalon

from

$7.99

Product Features:

Brand may vary by location

from

$26.99

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$69.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$52.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$22.79

Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$18.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Hardware included for easier installation (where applicable)

from

$182.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$139.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$48.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Complete with clamps
Used to set Toe in or out
replaces rusted or corroded sleeves
Used to connect inner and outer tie rod ends

from

$25.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$11.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Split design allows for easier installation
Replacement can reduce front end noise
Restores like-new steering and handling
Bushings are engineered to provide long life and dependability
Incorporates proven design and engineering features
Inner sleeve is phosphate coated for corrosion protection

from

$28.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$45.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$139.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Heavy duty design
Engineered steel composition results in a stronger component
Loose or worn chassis parts can lead to premature tire wear
Exclusive cover plate protects against contaminants leaking into the bearing surface
Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$42.23

The Sankei 555 Pitman Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Sankei 555 Pitman arm is manufactured to exacting OE tolerances for a proper fit and function.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function

from

$38.63

Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering
Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

from

$76.91

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$38.84

Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering
Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

from

$484.99

The steering gear box is the heart of the vehicles steering system. It guides the wheels movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. Each unit features 100% new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100% hydraulically tested to ensure perfect fit and function.

Product Features:

100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100% new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$372.99

The steering gear box is the heart of the vehicles steering system. It guides the wheels movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. Each unit features 100% new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100% hydraulically tested to ensure perfect fit and function.

Product Features:

100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100% new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$768.86

Since it’s inception Maval has consistently delivered remanufactured products to customers who demand the highest quality and value.

Product Features:

100% functional testing on all products produced.
Computerized tests insure that all products meet the O.E. Performance specification.
Performance and quality approvals from O.E. steering gear and pump manufacturers world wide.
Lifetime warranty on all remanufactured products.