2004 Mini Car Parts

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

New Standard Replacement Air Deflector, Front, Base

Product Features:

• Front, Base, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications. Always replace in Pairs, where applicable.
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance.
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function.
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable.
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal.
• Trilingual Install Instructions provided inside each package

New Standard Replacement Hood Panel Intake Duct Trim Ring, Paint To Match

Product Features:

• Paint To Match
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Fender Liner, Base Models

Product Features:

• Base Models, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Enrich your Mini Cooper¿s safety and visibility with the Burco 5331 replacement side view mirror. This glass-only replacement is tailored specifically for your vehicle, ensuring a seamless and hassle-free installation that gets you back on the road in no time. Forget the worries of a broken mirror and opt for this economical solution that meets all safety compliance standards. The Burco 5331 not only elevates your car’s look but also significantly enhances your field of vision, allowing you to navigate with confidence. Ideal for DIY enthusiasts and everyday drivers, this side mirror glass replacement is your ultimate choice for keeping your Mini Cooper in peak condition. Grab your Burco 5331 today and enjoy the clarity and safety you deserve, making every drive a breeze!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Sunroof Switch allows for effortless opening and closing of the sunroof, providing enhanced ventilation and a more enjoyable driving experience with natural light. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

• Patent-pending premium ball-bearing pulley design greatly reduces internal cable friction for smooth movement and long life
• Unique pulley profile improves cable retention during challenging frozen or sticky window operation
• Guaranteed fitment
• Durability and life cycle tested to meet or exceed OEM
• Quality cable sheathing resists compression to maintain proper cable tension
• Self-lubricating for quiet operation and reduced friction
• OE-compatible Plug
• Play connector

URO Premium products are re-engineered to solve the problem of these failure prone parts. URO Premium products feature a more robust design and/or higher-grade materials to vastly improve the reliability and durability of the product. Each URO Premium product bears the “URO Premium” seal (top left) and “PRM” suffix to their part number to easily distinguish them from their OEM counterparts. You no longer have to make a choice between brands, the choice is clear.

Product Features:

• Patent-pending premium ball-bearing pulley design greatly reduces internal cable friction for smooth movement and long life
• Unique pulley profile improves cable retention during challenging frozen or sticky window operation
• Guaranteed fitment
• Durability and life cycle tested to meet or exceed OEM
• Quality cable sheathing resists compression to maintain proper cable tension
• Self-lubricating for quiet operation and reduced friction
• OE-compatible Plug
• Play connector

AISIN Window Regulator Assemblies and Motors are mechanical and electrical components that work together to raise and lower the power windows in a vehicle. The window regulator assembly is the mechanical component that consists of gears, tracks and other parts that move the window up and down. The electric motor is the component that provides the power to move the window. Together, they form the power window system that allows the driver and passengers to easily raise and lower the windows with the push of a button.

Product Features:

• 100% new with many improvements from factory design.
• Designed and manufactured to meet OE standards.
• Strict quality control to ensure perfect fit.

AISIN Window Regulator Assemblies and Motors are mechanical and electrical components that work together to raise and lower the power windows in a vehicle. The window regulator assembly is the mechanical component that consists of gears, tracks and other parts that move the window up and down. The electric motor is the component that provides the power to move the window. Together, they form the power window system that allows the driver and passengers to easily raise and lower the windows with the push of a button.

Product Features:

• 100% new with many improvements from factory design.
• Designed and manufactured to meet OE standards.
• Strict quality control to ensure perfect fit.

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Product Features:

• CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
• OE-STYLE DESIGN: Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Product Features:

• Design type: spring loaded; single-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Anchor 9646 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2002-2008
• Weight approx: 2 Lbs

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

ManTransBrg-SealKit

Product Features:

• Brand may vary by location

LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
• Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
• Kits include everything needed for a quick, correct fit and reliable clutch performance.

LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
• Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
• Kits include everything needed for a quick, correct fit and reliable clutch performance.

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

• Every LuK Clutch Slave Cylinder is precision engineered. LuK employs advanced materials and manufacturing techniques to optimize performance that results in smooth and precise clutch engagement in every driving situation.
• LuK Clutch Slave Cylinders durability offer exceptional resistance to wear, heat, and stress. This ensures that the clutch system operates reliably under all conditions, providing drivers with confidence and peace of mind on the road.
• LuK slave cylinders are designed for easy installation, ensuring a smooth and efficient replacement process.
• LuK Clutch Slave Cylinders are a high quality replacement that¿meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is¿designed for optimal performance¿and to extend the life of the clutch.
• LuK Clutch Slave Cylinders are a high quality replacement that┐meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is┐designed for optimal performance┐and to extend the life of the clutch.
• LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.

LuK rigid flywheels, a smart alternative to resurfacing,¿offer a smooth, flat surface crucial for proper clutch operation, are engineered and manufactured to OE specifications, and are dynamically balanced to eliminate vibration and increase clutch performance

Product Features:

• Every component, including the ring gear, is engineered and manufactured to Original Equipment (OE) specifications.
• LuK flywheels are always new and never remanufactured.
• LuK solid flywheels are dynamically balanced to eliminate vibration and increase clutch performance.
• LuK’s engineering and quality materials contribute to a longer service life for the flywheel and clutch system.
• Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing.

Over 30 years ago, Schaeffler engineers under the LuK product brand developed a revolutionary technology for damping torsional vibrations in the drivetrain : the dual mass flywheel (DMF). Unlike a conventional flywheel, the DMF consists of two masses which are mounted to rotate against each other. A damping system in the form of arc springs is integrated into the DMF. Thus, it absorbs the torsional vibrations of the engine almost completely.

Product Features:

• A LuK DMF absorbs engine vibrations and torque spikes, preventing damage to the gearbox.
• A LuK dual mass flywheel (DMF) leads to less Bending Stress on the engines crankshaft.
• A LuK dual mass flywheel (DMF) leads to less vibration going to the Clutch Pedal.
• A LuK dual mass flywheel (DMF) reliably dampens torsional vibrations in the powertrain and increases driver and passenger comfort.
• A LuK dual mass flywheel dampens torsional vibrations in the powertrain and ensures driving comfort in all speed ranges. Matched to the each vehicle, the DMF enables low-speed driving and ensures lower fuel consumption and emissions.

LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
• Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
• Kits include everything needed for a quick, correct fit and reliable clutch performance.

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

• At the core of every LuK Clutch Master Cylinder lies a dedication to precision engineering. Each cylinder is meticulously designed and manufactured to exacting standards, ensuring seamless integration with the vehicle’s clutch system.
• LuK employs advanced materials and manufacturing techniques to optimize the performance of their master cylinders, resulting in smooth and precise clutch engagement in every driving situation.
• LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.
• The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
• Where required LuK Master Cylinders have a peak torque limiter. It reduces the volume flow in the hydraulic system during sport driving. This prevents overloading the powertrain from sudden starts, like when slipping off the clutch pedal.

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

• Capacity: 10 cu ft
• Dimensions: 36″ L x 30″ W x 16″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

This license plate bracket is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this license plate bracket matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bracket is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation