2004 Mercedes-Benz C320 Brake Parts
More 2004 Mercedes-Benz C320 Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 2004 Mercedes-Benz C320, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 2004 Mercedes-Benz C320 Brake Parts
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5060)
from
$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace b
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
ATE – ATE Brake Master Cylinder (Part No.N3000148175ATE)
from
$371.17
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.
Product Features:
See More
Product Features:
- Short closing paths
- Low volume uptake
- High efficiency
- Low throttling / after-suction resistance
- Low pressure differential between primary and secondary circuits
- Good bleedability
- Cr6-free surfaces for vehicles built from July 2007 (as required by law)
- Central valve version suitable for ABS
- Compact design – ideal for installation in small spaces
- Reduced weight – by roughly 20% compared to conventional central valve technology
- Fewer components – almost half as many as compared to conventional technologies
- Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
- Low volume uptake – minimized elastic deformations due to smaller seals
- Sealing cups supported in the housing – robustness against soiling and wear; longer life
- Cr6-free surfaces for vehicles built from July 2007 (as required by law)
Carquest Premium – Brake Fluid Pressure Sensor (Part No.BBA1015)
from
$87.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium Gold – Semi-Metallic Brake Pads – (4-Pad Set) (Part No.GMKD1121)
from
$53.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA620060)
from
$33.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Parking Brake Shoes (Part No.S816)
from
$29.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.
Product Features:
See More
Product Features:
- Wearever Brake Shoes come bonded or riveted based on OE design.
- Wearever Brake Shoes are coated to prevent rust.
- Wearever Brake Shoes are 100% New not remanufactured.
- Brand may vary by location
Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield+ (Part No.YH145277C)
from
$45.99
Carquest Professional coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Professional coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.
Product Features:
See More
Product Features:
- corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increas
- long-lasting performance.
- Manufactured to exacting quality and dimensional specifications for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Non-directional finish for decreased break-in time and reduced brake noise
- Brand may vary by location
ATE – Diaphram Position Se (Part No.N4040148169ATE)
from
$61.61
Diaphram Position Se
Febi – Bilstein Brake Disc Set Screw (Part No.N1004140486FEB)
from
$2.98
The Febi/Bilstein Brake Disc Set Screw is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8235A)
from
$6.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Maintains proper movement for safe, effective stopping performance
- Prevents noise and premature wear
Carquest Premium Gold – Semi-Metallic Brake Pads – (4-Pad Set) (Part No.GMKD876)
from
$48.49
CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
PowerStop – Front Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z26 Street Performance (Part No.K2950-26)
from
$283.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. This PowerStop Z26 Street Warrior Brake Upgrade Kit is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.
Product Features:
See More
Product Features:
- This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
- Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
- Stainless-steel pad shims resist the increased temperatures common on high performance applications
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Drilled & Slotted performance rotors provide maximum cooling
- Bolt-on upgrade for stock brakes, no modifications necessary
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
- Rotors are zinc plated for maximum protection against rust.
- Includes 1 Front Sensor Wire
- Buy with confidence from the originator & industry leader of brake kits
Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-2882)
from
$114.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Febi – Brake Caliper Bolts (Part No.N1041757581FEB)
from
$5.98
Eliminate the replacement of costly steering knuckles, as well as time spent drilling, tapping or rethreading the mounting holes, with Febi’s Disc Brake Caliper Bolt Kit.
Product Features:
See More
Product Features:
- OE Quality
- Save time, money and labor by replacing only the Disc Brake Caliper Bolt – instead of the entire caliper bracket or knuckle
- Pre-coated with thread lock to prevent loosening
Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield+ (Part No.YH145494C)
from
$72.99
Carquest Professional coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Professional coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.
Product Features:
See More
Product Features:
- corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increas
- long-lasting performance.
- Manufactured to exacting quality and dimensional specifications for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Non-directional finish for decreased break-in time and reduced brake noise
- Brand may vary by location
Dorman – Anti-Lock Brake System Tone Ring (Part No.917-570)
from
$23.99
This ABS wheel speed sensor tone ring directly replaces the original equipment tone ring on certain vehicle years, makes and models for a cost-effective fix.
Product Features:
See More
Product Features:
- Direct replacement – this ABS tone ring matches the fit and function of the stock part on certain vehicle applications
- Effective fix – addresses ABS failure caused by cracked, corroded or fatigued original ring
- Thoroughly tested – on-vehicle and laboratory testing ensures trouble-free operation
- Trustworthy quality – backed by team of designers and engineers in the United States
Vaico – Brake Dust Shield (Part No.N1086824051VCO)
from
$79.32
Brake Dust Shield
Carquest Wearever – Parking Brake Hardware Kit (Part No.17442)
from
$46.99
Brakes are designed as a system and all the parts need to work together for best performance. Parking brakes hold the vehicle in place when the vehicle is parked. Because the parking brake is so important, you want to be sure all it’s hardware and components are in good shape.
Product Features:
See More
Product Features:
- Contains all the necessary hardware for easy installation
- Direct replacement for a perfect fit, form and function
- Corrosion resistant for long-lasting durability against harsh roads
- Manufactured with quality materials to restrain high tolerances
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-3107)
from
$331.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1526)
from
$9.49
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.
Product Features:
See More
Product Features:
- Triggers a warning light on the dashboard
- Should be replaced each time the brake pad is replaced
- Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
Pex – Disc Brake Pad Electronic Wear Sensor (Part No.WK596)
from
$5.99
As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.
Product Features:
See More
Product Features:
- PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
- Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
- All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
- Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
- As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.
Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1226)
from
$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B2953)
from
$53.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B3125)
from
$75.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
PowerStop – Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K6698)
from
$170.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.
Product Features:
See More
Product Features:
- This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
- PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Multi-Layer rubberized shims provide virtually noise-free braking
- Drilled & Slotted performance rotors provide maximum cooling
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Bolt-on upgrade for stock brakes, no modifications necessary
- Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
- Rotors are zinc plated for maximum protection against rust.
- Includes 1 Rear Sensor Wire
- Buy with confidence from the originator & industry leader of brake kits
PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K2791)
from
$418.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.
Product Features:
See More
Product Features:
- This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
- PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Multi-Layer rubberized shims provide virtually noise-free braking
- Drilled & Slotted performance rotors provide maximum cooling
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Bolt-on upgrade for stock brakes, no modifications necessary
- Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
- Rotors are zinc plated for maximum protection against rust.
- Includes 1 Front & 1 Rear Sensor Wire
- Buy with confidence from the originator & industry leader of brake kits
PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K2783)
from
$412.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.
Product Features:
See More
Product Features:
- This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
- PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Multi-Layer rubberized shims provide virtually noise-free braking
- Drilled & Slotted performance rotors provide maximum cooling
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Bolt-on upgrade for stock brakes, no modifications necessary
- Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
- Rotors are zinc plated for maximum protection against rust.
- Includes 1 Front & 1 Rear Sensor Wire
- Buy with confidence from the originator & industry leader of brake kits
Popular 2004 Mercedes-Benz C320 Brake Parts Categories
2004 Mercedes-Benz C320 Brake Parts
You count on your 2004 Mercedes-Benz C320 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 76 Brake Parts ranging in price from $2.98 to $543.04, you’re sure to find everything you need for your 2004 Mercedes-Benz C320.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 19 different brands like Carquest, Carquest Premium, and Cardone. 2004 Mercedes-Benz C320 Brake Parts start as low as $2.98!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 728 extensive product reviews on 2004 Mercedes-Benz C320 Brake Parts. Some of the top-rated Brake Parts products we carry are Brake Rotor: Meets or Exceeds OE Specs with 3.9 stars and Ceramic Brake Pads – (4-Pad Set) with 4.4 stars.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2004 Mercedes-Benz C320 below to get started!
Top-Rated Brake Parts Brands For Your 2004 Mercedes-Benz C320
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Mercedes-Benz C320 running right for years to come. In our inventory you’ll find brands like Carquest, Carquest Premium, Cardone, and even more.
Popular Carquest Platinum Plus Brake Parts
You’ll find popular Carquest Platinum Plus brand products across Brake Rotors and Drums. All are waiting to get your 2004 Mercedes-Benz C320 back on the road. Some of the top-rated Carquest Platinum Plus products in these categories are:
from
$86.99
(4)
Coated Brake Rotor Meets or Exceeds OE Design, Enhanced Rust Protection
Front Brake Rotors
from
$45.99
(1)
Coated Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield+
Rear Brake Rotors
from
$72.99
(2)
Coated Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield+
Front Brake Rotors
Top-Rated Carquest Standard Brake Parts
If Carquest Standard are what you’re looking for, our inventory holds plenty. We stock Carquest Standard brand Brake Parts for your 2004 Mercedes-Benz C320, and some of our most reviewed Carquest Standard parts include:
FAQs for 2004 Mercedes-Benz C320 Brake Parts
What are the most purchased Brake Parts for the 2004 Mercedes-Benz C320?
Out of 76 Brake Parts for the 2004 Mercedes-Benz C320, the most popular in our inventory are:
What are the top-rated 2004 Mercedes-Benz C320 Brake Parts?
Top-rated Brake Parts for your 2004 Mercedes-Benz C320 based on customer reviews/ratings are:
from
$62.99
(22)
Brake Rotor: Meets or Exceeds OE Specs
“Does it’s job. No complaints so far. Great price.
Installed on 99 E320 4 Matic.”
from
$64.99
(14)
Ceramic Brake Pads – (4-Pad Set)
“They fit and the price is great. Doesn’t come with the sensors.”
from
$75.99
(10)
Brake Rotor: Meets or Exceeds OE Specs
“The rotors are very good quality. They are very well machined. They are a perfect duplicate of the original Mercedes Benz parts. The installed perfec”
