2004 Lincoln Navigator Exhaust Mufflers

Essential 2004 Lincoln Navigator Exhaust Mufflers

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18921)

SoundFX Muffler, Direct Replacement, No Fabrication Needed

from

$139.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.55339)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$163.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval (Part No.17220)

Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval

from

$102.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • Stainless steel construction for lifelong protection
  • 100% welded design for maximum durability
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
See More

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18914)

SoundFX Muffler, Direct Replacement, No Fabrication Needed

from

$168.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Flowmaster Inc. – Delta 40 Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842543)

Delta 40 Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound

from

$154.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942543)

40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound

from

$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21355)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$205.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942548)

Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound

from

$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Center Outlet, Non-Reversible, Aggressive Sound (Part No.853046)

Super 40 Series Muffler, 3in Offset Inlet 3in Center Outlet, Non-Reversible, Aggressive Sound

from

$154.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:
  • Durable fully welded 409 stainless steel
  • Noticeable interior resonance
  • Deep aggressive exhaust note
  • Excellent performance on high horsepower vehicles
  • Made in the USA
See More

Flowmaster Inc. – Delta 40 Muffler, 3in Offset Inlet 3in Center Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.843041)

Delta 40 Muffler, 3in Offset Inlet 3in Center Outlet, 13in long, Non-Reversible, Aggressive Sound

from

$154.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Dynomax – Super Turbo Muffler: Universal Fit Aluminized Steel, 16" L, 3" In, 3" Out, Oval (Part No.17673)

Super Turbo Muffler: Universal Fit Aluminized Steel, 16" L, 3" In, 3" Out, Oval

from

$259.99
DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglas

Product Features:
  • Large internal flow tubes improve exhaust flow and reduce backpressure
  • Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
  • Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
  • Dyno proven to flow up to 700 SCFM
See More

Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Center Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.8043041)

40 Series Muffler, 3in Offset Inlet 3in Center Outlet, 13in long, Non-Reversible, Aggressive Sound

from

$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042543)

40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound

from

$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound (Part No.52558)

50 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound

from

$185.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Center Outlet, Non-Reversible, Aggressive Sound (Part No.953046)

Super 40 Series Muffler, 3in Offset Inlet 3in Center Outlet, Non-Reversible, Aggressive Sound

from

$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 70 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, 22in long, Non-Reversible, Mild Sound (Part No.52573)

70 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, 22in long, Non-Reversible, Mild Sound

from

$221.99
The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

2004 Lincoln Navigator Exhaust Mufflers

Maybe you’re in the middle of a full rebuild of that 2004 Lincoln Navigator. Maybe you just need a couple of Exhaust Mufflers. Either way, Advance Auto Parts has 5 different Exhaust Mufflers in our inventory ranging from $123.99 to $163.99. That means you can find the exact parts or products you need to keep that 2004 Lincoln Navigator running smoothly.

Exhaust Mufflers are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Lincoln Navigator. Walker and Flowmaster Inc. are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Exhaust Mufflers for your 2004 Lincoln Navigator, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Exhaust Mufflers to keep your 2004 Lincoln Navigator rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Exhaust Mufflers Brands To Make Your 2004 Lincoln Navigator Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Lincoln Navigator demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust Mufflers make up Advance Auto Parts’ inventory, and all are ready to help make your Navigator the best it can be. Be sure to browse some of our top Exhaust Mufflers brands and parts.

FAQs for 2004 Lincoln Navigator Exhaust Mufflers

What are the most purchased Exhaust Mufflers for the 2004 Lincoln Navigator?

Out of 5 Exhaust Mufflers for the 2004 Lincoln Navigator, the most popular in our inventory are: