from

$3.39

Level Sensor Grommet

from

$144.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$9.99

New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:

MT2909
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$20.68

Water Temperature Se

from

$186.23

Water Pump

from

$508.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$260.97

Built to meet the latest OE manufacturer-specified designs, Rein Auxiliary Water Pumps are the best way to make sure you have the proper heat protection for the engine in your vehicle. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

OE Quality, reliability and service life
Leak-proof sealing of the drive
Fuel savings and reduced emissions
Cooling even without operation of the engine
CO²-reduction by optimized efficiency, speed control and reduced weight
Coverage of a wide hydraulic performance range
Reduced noise level

from

$16.99

New Standard Replacement A/C System Seal Kit, MT2723, L4 Engine

Product Features:

MT2723, L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$17.49

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$26.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$19.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$29.65

Motorcraft Water temperature sensors are designed for durability and electrical performance. Motorcraft digital Water temperature sensors are designed to work with Ford and Lincoln transmissions and engine control computers.

Product Features:

Sensors are tested according to Ford Motor Company noise, vibration and harshness (NVH) engineering standards
Recommended by Ford Motor Company

from

$40.99

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$292.11

A/C Power Module

from

$54.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Utilizing high grade materials to ensure peak conductivity and perfect connections
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$1.29

SEAL THERMOSTAT

from

$235.96

Nissens manufactures an A/C Condenser that is the same quality fit and performance of the OE Condenser it replaces.

Product Features:

OEM Quality Direct fit Application
Utilizes fixed feeder tubes with no fault tolerance in length, diameter and bending angle, providing protection against leaks and loss of efficiency.

from

$349.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$503.99

As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$491.75

Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style mounting brackets and hose connections.
Integrated transmission oil cooler when applicable.
Compact and lightweight.

from

$18.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$22.79

Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:

OE quality and design
Maintenance-free, durable elements

from

$41.49

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.00

Water Outlet O-Ring

from

$52.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$195.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
vibration testing
blast testing
and salt spray testing to simulate real world conditions.