2004 Isuzu Ascender Suspension Parts
More 2004 Isuzu Ascender Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2004 Isuzu Ascender, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2004 Isuzu Ascender Suspension Parts
Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)
from
$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).
Product Features:
See More
Product Features:
- Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
- Formulated to help prevent gear wear and protect against rust and corrosion
- Formulated to deliver enhanced protection against deposits
- Helps provide better protection during extreme operating conditions
MOOG – Coil Spring Set (Part No.81112)
from
$144.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Suspension Strut Mount (Part No.K6702)
from
$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
GM Genuine Parts – Multi-Purpose Relay (Part No.212-559)
from
$38.99
GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Suncore – SuspAirBag/Bellows (Part No.148G-15-HD)
from
$119.99
SuspAirBag/Bellows
MOOG – Strut Bellows (Part No.K160285)
from
$23.49
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Dorman – Suspension Control Arm (Part No.521-888)
from
$106.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.
Product Features:
See More
Product Features:
- Direct replacement – this suspension trailing arm fits and functions like the original equipment part
- Quality construction – manufactured from same materials as original equipment for safety and reliability
- Durable – protective finish for long-lasting corrosion resistance
- Quality tested – has undergone testing to ensure proper fit and performance
ACDelco – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT146)
from
$26.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Monroe – OESpectrum Light Truck Shock Absorber (Part No.37241)
from
$57.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
- 1-3/8 inch (34.9 mm) bore (On most applications)
- 5/8-inch (15.9 mm) diameter piston rod (On most applications)
Suncore – Air Suspension Conversion Kit (Part No.148G-30-R)
from
$144.99
At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.
Product Features:
See More
Product Features:
- Includes Instructions
- Lifetime Warranty
Suncore – SuspAirBag/Bellows (Part No.148G-15-R-PAIR)
from
$209.99
SuspAirBag/Bellows
Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-813331)
from
$129.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
- Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
- Springs are built with U.S. grade steel and designed to match factory ride height and performance
- OE quality strut mount, bearing plate and brackets
- Complete strut assembly is extensively tested for functionality and durability
- Built with a micro-smooth, chrome-plated piston rod
MOOG – Coil Spring Set (Part No.81049)
from
$115.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
KYB – Strut Mounting Kit (Part No.L3033175265KYB)
from
$60.51
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
Suncore – Gas Shock Kit (Part No.148G-12-R-PAIR)
from
$74.99
Gas Shock Kit
Suncore – Shock Kit (Part No.2-12S251020-001)
from
$69.99
Shock Kit
Driveworks – Control Arm Bracket Front Lower Left (Part No.520-157)
from
$127.99
Restore a smooth ride, directional stability, and agile handling with our suspension components. Their construction ensures durability. Plus, bushings are included for installation (where applicable).
Product Features:
See More
Product Features:
- Powder coating or paint effectively prevents rust
- Direct replacement for a trouble-free installation
- Corrosion-resistant for long-lasting performance
- Rigorous quality control measures ensure conformance to product standards
Driveworks – Control Arm Bracket Front Lower Right (Part No.520-158)
from
$131.99
Restore a smooth ride, directional stability, and agile handling with our suspension components. Their construction ensures durability. Plus, bushings are included for installation (where applicable).
Product Features:
See More
Product Features:
- Powder coating or paint effectively prevents rust
- Direct replacement for a trouble-free installation
- Corrosion-resistant for long-lasting performance
- Rigorous quality control measures ensure conformance to product standards
Driveworks – CONTROL ARM BUSHING (Part No.DW-K200269)
from
$19.99
CONTROL ARM BUSHING
Rare Parts – Control Arm Bush (Part No.RP19530)
from
$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
MOOG – Coil Spring Insulator (Part No.K160072)
from
$17.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
Rare Parts – Coil Spring Insul (Part No.RP46359)
from
$23.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Suncore – Shock Kit (Part No.2-12S211500-001)
from
$49.99
Shock Kit
Suncore – Quick Strut Kit (Part No.2-55S11180-001)
from
$204.99
Quick Strut Kit
KYB – Complete Corner Unit Assembly -Strut, Mount and Spring (Part No.SR4073)
from
$213.99
A strut assembly handles vehicle weight, determines ride height, acts as the steering pivot, controls vehicle stability and can affect a vehicles electronic crash avoidance systems. As an original equipment supplier, KYB understands how your vehicle should ride, handle and perform. The KYB Strut-Plus is engineered to help restore the handling and control capabilities of your vehicle. We start with an Original Equipment (OE) Restoring KYB Strut. High carbon steel coil springs are developed considering vehicle attributes and corners weights to help make sure the ride height is restored within OE specifications.
Product Features:
See More
Product Features:
- The World’s Best Complete Strut Assembly From The Most Trusted Name In Orem Quality Shocks And Struts
- Designed For Proper Ride Height And Original Handling Capabilities On Gm Subs
- Includes A KYB Excel-G Strut, A Stronger Steel Outer Shell And KYB’S Application Specific Precision Designed Damping Valves
- Assembled In Use
- Exact Fitment Engineered And Pre-Assembled For Professional Results
- Features An Application Engineered KYB Spring Designed To Match The Strut, Maintain Proper Ride Height Longer And Control Weight Without Sacrificing Vehicle Ride Quality
- Engineered To Help Vehicles With Electronic Safety Systems (Esc, Abs, Etc.)
- Assembled In Use
Carquest Premium – Suspension Control Arm (Part No.800-83799)
from
$84.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.
Product Features:
See More
Product Features:
- Direct replacement – this suspension trailing arm fits and functions like the original equipment part
- Quality construction – manufactured from same materials as original equipment for safety and reliability
- Durable – protective finish for long-lasting corrosion resistance
- Quality tested – has undergone testing to ensure proper fit and performance
Dorman – CONTROL ARM (Part No.520-143)
from
$96.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – Control Arm (Part No.RP12650)
from
$176.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Popular 2004 Isuzu Ascender Suspension Parts Categories
2004 Isuzu Ascender Suspension Parts
You count on your 2004 Isuzu Ascender to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 67 Suspension Parts ranging in price from $14.99 to $572.99, you’re sure to find everything you need for your 2004 Isuzu Ascender.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 13 different brands like Monroe, Valvoline, and Moog. 2004 Isuzu Ascender Suspension Parts start as low as $14.99!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,262 extensive product reviews on 2004 Isuzu Ascender Suspension Parts. Some of the top-rated Suspension Parts products we carry are OESpectrum Light Truck Shock Absorber with 4.5 stars and OESpectrum Strut with 4.3 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2004 Isuzu Ascender below to get started!
Top-Rated Suspension Parts Brands For Your 2004 Isuzu Ascender
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Isuzu Ascender running right for years to come. In our inventory you’ll find brands like Monroe, Valvoline, Moog, and even more.
Popular Bilstein Suspension Parts
You’ll find popular Bilstein brand products across Shocks and Struts. All are waiting to get your 2004 Isuzu Ascender back on the road. Some of the top-rated Bilstein products in these categories are:
Top-Rated Suspension Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Suspension Parts for your 2004 Isuzu Ascender, and some of our most reviewed parts include:
from
$213.99
(133)
Complete Corner Unit Assembly -Strut, Mount and Spring
Suspension Strut and Coil Spring Assemblies
FAQs for 2004 Isuzu Ascender Suspension Parts
What are the most purchased Suspension Parts for the 2004 Isuzu Ascender?
Out of 67 Suspension Parts for the 2004 Isuzu Ascender, the most popular in our inventory are:
from
$135.99
(23)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Front Shock and Struts
What are the top-rated 2004 Isuzu Ascender Suspension Parts?
Top-rated Suspension Parts for your 2004 Isuzu Ascender based on customer reviews/ratings are:
from
$115.99
(12)
Coil Spring Set
“Bought this product to replace expensive air bag suspension for 2006 Envoy, it was a easy job had to take off the bottom bolts of the shocks for extra”
