2004 Hyundai Accent Steering and Chassis Parts
Find Your Specific 2004 Hyundai Accent Steering and Chassis Parts
Below you will find various in-demand Hyundai Steering and Chassis Parts, components and accessories for your 2004 Accent. Advance Auto Parts has popular Accent parts like Ball Joints, Tie Rods, Alignment Hardwares and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Accent model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 2004 Hyundai Accent Steering and Chassis Parts below and start saving instantly.
Popular 2004 Hyundai Accent Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 2004 Hyundai Accents
Driveworks – Camber Bolt Kit (Part No.DW-K90473)
from
$18.29
Camber Bolt Kit
MOOG – Alignment Camber Kit (Part No.K90473)
from
$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Rare Parts – Tie Rod End (Part No.RP28808)
from
$109.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
MANDO – New OE Power Steering Pump, Direct Replacement (Part No.20A1017)
from
$160.99
When a Power Steering (PS) Pump goes bad or fails, a driver most evidently will experience an abnormal whining/grinding noise occurring while turning the wheel and will eventually feel loss of steering response & assist. The PS pump is an essential component, as its responsibility is to send hydraulic fluid to the power steering rack and pinion. HL Mando OE power steering pumps are just like the one from the factory. Our pumps come complete with pulley and ready to install. Don’t risk using just any aftermarket PS pump, get the job done right with the original – We Are OE!
Product Features:
See More
Product Features:
- Direct Original Equipment Replacement
- Tested for Quality, Durability, and Reliability
- Manufactured in Korea
Cardone New – New Power Steering Reservoir (Part No.3R-336)
from
$60.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100 percent tested to ensure proper fit and function.
Product Features:
See More
Product Features:
- 100 percent testing ensures leak-free performance.
- Designed to match O.E. fit, function and performance.
- Manufactured from O.E. grade material for strength and durability.
- Resistant to cracking caused by the high temperatures in the engine compartment.
- Reservoirs with integrated filter have the same filtration efficiency as O.E.
Driveworks – Camber Bolt Kit (Part No.DW-K9757)
from
$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
Dorman – RACK BELLOW (Part No.541-543)
from
$29.99
RACK BELLOW
Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-2405)
from
$345.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100 percent replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Rare Parts – CAM BOLT KIT (Part No.RP17632)
from
$55.99
CAM BOLT KIT
Carquest Premium – 3/8" I.D. Molded Return Hose (Part No.40521)
from
$37.49
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Rare Parts – Sway Bar Bushing (Part No.RP16775)
from
$25.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – CAM BOLT KIT (Part No.RP16745)
from
$48.99
CAM BOLT KIT
Rare Parts – Sway Bar Link (Part No.RP19088)
from
$67.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Control Arm W/ Ball Joint (Part No.RP11454)
from
$149.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)
from
$438.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Powercraft – Rack Pinion Seal Kit (Part No.8886)
from
$78.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo (Part No.37468)
from
$148.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo (Part No.37495)
from
$94.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Mounting Kit System (Part No.226201)
from
$11.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Dorman – Steering Knuckle (Part No.698-044)
from
$299.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Steering Knuckle (Part No.698-251)
from
$322.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Suspension Ball Joint (Part No.K500305)
from
$38.49
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG – Suspension Ball Joint (Part No.K500015)
from
$42.49
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Cardone – Power Steering Filter (Part No.20-0012F)
from
$47.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0058F)
from
$50.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Driveworks – Steering Tie Rod End (Part No.DW-ES3377)
from
$31.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Upgrade your 2004 Hyundai Accent with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 2004 Hyundai Accent, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Hyundai or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Accent functioning at its best. At Advance Auto Parts, we offer a wide selection of 52 Steering and Chassis Parts for the 2004 Hyundai Accent, designed to meet your needs without breaking the bank.
From
Ball Joint
replacements to
Tie Rods
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2004 Hyundai Accent at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $7.99 to $501.99, with
an average price of $82.78.
Our 52 Steering and Chassis Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 2004 Hyundai Accent without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Hyundai Accent, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Moog, DriveWorks, Imperial, and more.
Moog Steering and Chassis Parts
start at just $43.49 and boast an impressive 4.5 stars average rating from customers.
DriveWorks and Imperial also bring quality to the table, with Steering and Chassis Parts available starting at $11.99, and at an average 4.3 stars rating.
With 882 customer reviews and counting, our 2004 Hyundai Accent Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2004 Hyundai Accent is always ready to roll. We’re committed to providing you with everything you need to keep your Accent in top shape, all in one place.
Start shopping confidently below for your 2004 Hyundai Accent!
Best-Selling Ball Joints for 2004 Hyundai Accents
Enhance the driving experience in your Hyundai with 6 quality Ball Joint components, starting at $24.99.
MOOG – Suspension Ball Joint (Part No.K90691)
from
$24.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Rare Parts – Conrol Arm W/Bj (Part No.RP11714)
from
$169.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Control Arm W/ Ball Joint (Part No.RP11713)
from
$169.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Dorman – Control Arm (Part No.520-864)
from
$125.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Control Arm (Part No.520-863)
from
$125.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Ball Joint (Part No.RP11239)
from
$49.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Most Popular 2004 Hyundai Accent Tie Rods
Customize your Hyundai with 5 Tie Rods products
like Tie Rod Ends and
Center Tie Rod Ends, all
priced under $83.99.
MOOG – Steering Tie Rod End (Part No.ES3377)
from
$47.49
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Steering Tie Rod End (Part No.DW-ES3377)
from
$31.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Rare Parts – Tie Rod End (Part No.RP28371)
from
$83.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP28087)
from
$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
MANDO – Steering Tie Rod End (Part No.15N1045)
from
$14.99
Tie Rod Ends are critical suspension components linking the power steering rack to the wheel housing, designed to create stability in proper control and steering. Normal mileage over time and/or even damage (resulting from external impact) may cause the tie rod end bushings to experience excessive play. Excessive tie rod end play may eventually lead to alignment issues causing steering & abnormal tire damage – cupping or rapid tread wear may cause unwanted vibration issues that may affect proper steering ability or create other issues. HL HL Mando tie rod ends are high-quality aftermarket replacements specifically designed for Hyundai KIA, and Genesis vehicles, ensuring reliable performance and durability. Trust in HL Mando for your aftermarket needs!
Product Features:
See More
Product Features:
- Original Equipment Steering Rack & Pinion
- 100% Direct Replacement. Ready to Install
- Manufactured in Korea
Top Picks for 2004 Hyundai Accent Alignment Hardware
Upgrade Hyundai Accents with top-quality Alignment Hardware parts, including 2 OEM and aftermarket selections for your 2004 model.
Driveworks – Camber Bolt Kit (Part No.DW-K9757)
from
$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)
from
$438.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
In-Demand Sway Bars for 2004 Hyundai Accents
Select from 5 premium Sway Bars parts for your 2004 Hyundai Accent, with prices ranging from $14.99 to $54.99.
Rare Parts – Sway Bar Link Kit (Part No.RP18646)
from
$54.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link Kit (Part No.RP18555)
from
$54.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link (Part No.RP19290)
from
$41.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Bushing (Part No.RP16775)
from
$25.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Bushing (Part No.RP16768)
from
$14.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Most Sold 2004 Hyundai Accent Power Steering Parts
Explore our best-selling Hyundai parts for the 2004 Accent among 26 OEM and aftermarket options starting from $7.99.
Cardone – Power Steering Filter (Part No.20-0058F)
from
$50.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0012F)
from
$47.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo (Part No.37468)
from
$148.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Imperial – Mounting Kit System (Part No.226201)
from
$11.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Cardone – New Power Steering Filter (Part No.20-0038F)
from
$32.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element.
- Patented built-in bypass that filters up to 190 micron particles.
- Designed to extend the life of the steering system.
- Sure-grip barb connections are included to ensure proper hose fitment.
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Cardone – Power Steering Filter (Part No.20-P038F)
from
$35.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$34.99
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
MANDO – New OE Power Steering Pump, Direct Replacement (Part No.20A1017)
from
$160.99
When a Power Steering (PS) Pump goes bad or fails, a driver most evidently will experience an abnormal whining/grinding noise occurring while turning the wheel and will eventually feel loss of steering response & assist. The PS pump is an essential component, as its responsibility is to send hydraulic fluid to the power steering rack and pinion. HL Mando OE power steering pumps are just like the one from the factory. Our pumps come complete with pulley and ready to install. Don’t risk using just any aftermarket PS pump, get the job done right with the original – We Are OE!
Product Features:
See More
Product Features:
- Direct Original Equipment Replacement
- Tested for Quality, Durability, and Reliability
- Manufactured in Korea
Carquest Premium – 3/8" Beaded Tube x 3/8" Beaded Tube (Part No.38109)
from
$64.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Zinc coated tubes protect against rust and corrosion
MOOG – Rack & Pinion Bellows Kit (Part No.K9882)
from
$39.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Atlantic Automotive Eng – NEW RACK & PINION (Part No.3387N)
from
$501.99
NEW RACK & PINION
Atlantic Automotive Eng – NEW P/S PUMP (Part No.5343N)
from
$218.99
NEW P/S PUMP
Powercraft – Rack Pinion Seal Kit (Part No.8886)
from
$78.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Power Steering Return Hose, 3/8" Beaded Tube x 3/8" I.D. Hose (Part No.37948)
from
$76.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Carquest Premium – Pressure Hose Assembly, 14mm Female Inv. Flare x 16mm Banjo (Part No.39869)
from
$64.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Cardone New – New Power Steering Reservoir (Part No.3R-322)
from
$51.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100 percent tested to ensure proper fit and function.
Product Features:
See More
Product Features:
- 100 percent testing ensures leak-free performance.
- Designed to match O.E. fit, function and performance.
- Manufactured from O.E. grade material for strength and durability.
- Resistant to cracking caused by the high temperatures in the engine compartment.
- Reservoirs with integrated filter have the same filtration efficiency as O.E.
Rare Parts – Rack & Pinion Bellows (Part No.RP17819)
from
$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
Atlantic Automotive Eng – P/S FLUID RESERVOIR (Part No.RES-0073)
from
$35.99
P/S FLUID RESERVOIR
Carquest Premium – Power Steering Return Tube Assembly, 16mm Male "O" Ring x 3/8" Beaded Tube (Part No.40585)
from
$35.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Zinc coated tubes protect against rust and corrosion
Dorman – RACK BELLOW (Part No.541-543)
from
$29.99
RACK BELLOW
BBB Industries – Power Steering Filter (Part No.991-FLT4)
BBB Industries – Power Steering Filter (Part No.991-FLT2)
Top-Rated Steering and Chassis Parts Brands For Your 2004 Hyundai Accent
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2004 Hyundai Accents. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, DriveWorks, and Imperial, and more. Steering and Chassis Parts from these brands that fit a 2004 Accent start at just $11.99 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Moog 2004 Hyundai Accent Steering and Chassis Parts
When it comes to maintaining or upgrading your 2004 Hyundai Accent, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2004 Hyundai Accent. With over 2 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $43.49, with an average price of just $45.49. Plus, with over 9 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$43.49
(2)
Strut Alignment Camber Kit
“easy to use/install. easy to follow instructions and works just like it says it does.”
Popular DriveWorks 2004 Hyundai Accent Steering and Chassis Parts
DriveWorks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2004 Hyundai Accent owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 2004 Accent, Advance Auto Parts carries a full inventory of 3 DriveWorks Steering and Chassis Parts. Plus you will be keeping your Hyundai in peak condition while saving money because prices on these DriveWorks Steering and Chassis Parts range from $18.29 to $31.49, plus, with more than 13 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.
from
$31.49
(5)
Steering Tie Rod End
“My tie rod went unexpectedly and I was able to get my part the same day at a local Advance Auto. The pricing was affordable and the part was able to b”
FAQs for 2004 Hyundai Accent Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 2004 Hyundai Accents?
Out of 52 Steering and Chassis Parts that fit 2004 Hyundai Accents, the following parts are the top sellers:
- New Power Steering Filter (10417593) – $32.99
- Steering Tie Rod End (15511111) – $31.49
- Camber Bolt Kit (10361686) – $18.29
What’s the price range for 2004 Hyundai Accent Steering and Chassis Parts?
Steering and Chassis Part prices for the 2004 Hyundai Accent start at $7.99 and go up to $501.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 2004 Hyundai Accent?
The average price for Steering and Chassis Parts for the 2004 Hyundai Accent is $82.78. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Hyundai Accent model years?
What are the cheapest Steering and Chassis Parts for my 2004 Hyundai Accent?
The cheapest 2004 Hyundai Accent Steering and Chassis Parts we carry in stock are:
- Power Steering Filter (50167394) – $7.99
- Mounting Kit System (6014844) – $11.99
- Steering Tie Rod End (50221331) – $14.99
- Sway Bar Bushing (11514158) – $14.99
- Camber Bolt Kit (10361686) – $18.29
What are the top-rated Steering and Chassis Parts that fit the 2004 Hyundai Accent?
Out of 882 reviews by customers, our 2004 Hyundai Accent Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2004 Hyundai Accent and their top-rated products:
- Tie Rods
- Steering Tie Rod End (20515790) – $47.49
- Steering Tie Rod End (15511111) – $31.49
What types of Steering and Chassis Parts do you sell for my 2004 Hyundai Accent?
As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2004 Hyundai Accent:
Can I get help with 2004 Hyundai Accent Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Hyundai Steering and Chassis Parts and more.
What is your return policy for Hyundai Accent Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Hyundai Accent Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
