2004 Hummer H2 Fuel and Emissions Systems

Essential 2004 Hummer H2 Fuel and Emissions Systems

ACDelco – GM Original Equipment Fuel Tank Sending Unit Lock Ring (Part No.E2029575746ACD)

GM Original Equipment Fuel Tank Sending Unit Lock Ring

from

$18.63
ACDelco GM Original Equipment Fuel Tank Sending Unit Lock Rings are quality replacement parts for effectively sealing ACDelco GM OE Fuel Tank Sending Units. ACDelco GM OE Fuel Tank Sending Unit Lock Rings are a GM-recommended replacement for your vehicle’s original components. These original equipment lock rings are manufactured to fit your specific GM vehicle and will provide the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory fuel tank sending unit lock ring
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG0331)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$303.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Dorman – Fuel Fitting Retainer – Spring Load (Part No.800-032)

Fuel Fitting Retainer - Spring Load

from

$28.99
This fuel line clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this fuel line clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – GM Original Equipment Fuel Injector Seal Kit (Part No.C1060205441ACD)

GM Original Equipment Fuel Injector Seal Kit

from

$28.49
The ACDelco GM Original Equipment Fuel Injector Seal Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Chrysler, GM Push Rivet (Part No.961-359D)

Chrysler, GM Push Rivet

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1019)

Vapor Canister Purge Solenoid

from

$44.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Multi-Purpose Pigtail (Part No.PT1031)

Multi-Purpose Pigtail

from

$104.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – GM Original Equipment Oxygen Sensor (Part No.C5010435169ACD)

GM Original Equipment Oxygen Sensor

from

$71.24
The ACDelco GM Original Equipment Oxygen (O2) Sensor is a GM-recommended replacement for your vehicle’s original component. The Oxygen (O2) Sensor is a special feedback sensor on your vehicle’s exhaust system. This sensor measures the proportion of oxygen in the exhaust gases. Using this measurement, the engine management computer can adjust the air/fuel ratio near the optimum value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. This original equipment oxygen sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. When you are looking for a match to GM Original Equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done.

Product Features:
  • Detect oxygen content in the exhaust gases to optimize emissions and fuel economy
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest – Multi Purpose Relay (Part No.83A1003)

Multi Purpose Relay

from

$20.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

NTK – Ambient Air Temperature Sensor (Part No.AN0115)

Ambient Air Temperature Sensor

from

$12.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Ambient Air Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper reading of outside air temperature.
  • The Ambient Air Temperature Sensor measures outside air temperature and is used by the heating and cooling control system, along with other vehicle cabin sensors, to control temperature and blower speed.
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Keyed Alike Locking Fuel Cap

from

$10.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70947)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$2.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

GM Genuine Parts – Fuel Injection Throttle Control Actuator Module (Part No.12588923)

Fuel Injection Throttle Control Actuator Module

from

$309.99
GM Genuine Parts Fuel Injection Throttle Control Actuator Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules are electrically operated motor assemblies that control throttle plates. They receive an electrical signal from the engine control module and open throttle plates based on input from the accelerator pedal module. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Fuel Tank O-Ring (Part No.911-245)

Fuel Tank O-Ring

from

$39.99
This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
  • Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
  • Durable construction – recommended for replacement when the fuel pump or sensor is replaced
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Oxygen Sensor Connector (Part No.PTA1517)

Oxygen Sensor Connector

from

$53.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

GM Genuine Parts – Fuel Pump O-Ring (Part No.G41)

Fuel Pump O-Ring

from

$12.99
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.70895)

EGR/EXHAUST AIR SUPPLY GASKET

from

$1.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10247)

Manifold Absolute Pressure Sensor

from

$61.99
Delphi MAP sensors use the latest OE technology; Internally protected against moisture intrusion and vibration; Manufactured to meet or exceed OE requirements for 100,000 miles.

Product Features:
  • Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
  • Internally protected against moisture intrusion and vibration
  • Long lasting and durable
  • Designed and engineered with Delphi expertise
See More

Carquest Premium – Air Suspension Compressor Motor Connector (Part No.PTC1308)

Air Suspension Compressor Motor Connector

from

$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

GM Genuine Parts – Passenger Side Multi-Port Fuel Injector Rail (Part No.17113695)

Passenger Side Multi-Port Fuel Injector Rail

from

$202.99
GM Genuine Parts Fuel Injector Rails are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Multi-Purpose Pigtail (Part No.PT2195)

Multi-Purpose Pigtail

from

$181.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

GM Genuine Parts – Fuel Injector Retainer Kit with Clip (Part No.12570620)

Fuel Injector Retainer Kit with Clip

from

$13.79
GM Genuine Parts Fuel Injector and Insulator Retainer Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Nylon Shield Retainer- Ford and GM (sold by each) (Part No.700-614)

Nylon Shield Retainer- Ford and GM (sold by each)

from

$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

ACDelco – GM Original Equipment Vapor Canister Purge Valve (Part No.B7080352132ACD)

GM Original Equipment Vapor Canister Purge Valve

from

$67.53
The ACDelco GM Original Equipment Vapor Canister Purge Valve is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS017)

Fuel Injector Seal Kit

from

$2.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

ACDelco – Vapor Canister Vent Solenoid (Part No.214-2149)

Vapor Canister Vent Solenoid

from

$36.99
ACDelco Professional Vapor Canister Vent Solenoid is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket solenoid is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Vapor Canister (Part No.CPN1063)

Vapor Canister

from

$185.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Driveworks – Electrical Relay (Part No.83296)

Electrical Relay

from

$16.79
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

2004 Hummer H2 Fuel and Emissions Systems

You count on your 2004 Hummer H2 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 99 Fuel and Emissions Systems ranging in price from $0.99 to $551.03, you’re sure to find everything you need for your 2004 Hummer H2.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 14 different brands like Carquest Premium, Felpro, and Bosch. 2004 Hummer H2 Fuel and Emissions Systems start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 495 extensive product reviews on 2004 Hummer H2 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Vapor Canister Vent Solenoid with 4.8 stars and MAP Sensor with 4.9 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2004 Hummer H2 below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 2004 Hummer H2

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Hummer H2 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, Bosch, and even more.

Popular Delphi Fuel and Emissions Systems

You’ll find popular Delphi brand products across Fuel Injectors. All are waiting to get your 2004 Hummer H2 back on the road. Some of the top-rated Delphi products in these categories are:
Mass Air Flow Sensor
from $129.99
(21)
Mass Air Flow Sensor
Air Flow Meters and Mass Air

Top-Rated Carquest Premium Fuel and Emissions Systems


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 2004 Hummer H2, and some of our most reviewed Carquest Premium parts include:

FAQs for 2004 Hummer H2 Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 2004 Hummer H2?

Out of 99 Fuel and Emissions Systems for the 2004 Hummer H2, the most popular in our inventory are:
Fuel Injector O-Ring Kit
from $7.49
(109)
Fuel Injector O-Ring Kit
Fuel Injector O-Ring Kits
Mass Air Flow Sensor (MAF) - 100% NEW
from $89.99
(2)
Mass Air Flow Sensor (MAF) – 100% NEW
Air Flow Meters and Mass Air

What are the top-rated 2004 Hummer H2 Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 2004 Hummer H2 based on customer reviews/ratings are:
Vapor Canister Vent Solenoid
from $36.99
(29)
Vapor Canister Vent Solenoid
“Stop asking me to do this”
MAP Sensor
from $67.05
(27)
MAP Sensor
“It was what I need for the engine light to go off.”
Oxygen Sensor: 4 Wire, 14.76" Long, Heated, Exact Fit
from $98.99
(16)
Oxygen Sensor: 4 Wire, 14.76" Long, Heated, Exact Fit
“Excellent product”