2004 Freightliner Sprinter 2500 Steering and Chassis Parts

Below you will find various in-demand Freightliner Steering and Chassis Parts, components and accessories for your 2004 Sprinter 2500. Advance Auto Parts has popular Sprinter 2500 parts like Power Steering Parts, Sway Bars, Tie Rods and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Sprinter 2500 model years including 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 and more. Select a category of 2004 Freightliner Sprinter 2500 Steering and Chassis Parts below and start saving instantly.

Popular 2004 Freightliner Sprinter 2500 Steering and Chassis Parts Categories

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Power Steering Pressure Hoses

Power Steering Return Hoses

Sway Bar Bushings

Power Steering Pump Hose Fittings

Essential Steering and Chassis Parts for 2004 Freightliner Sprinter 2500s

from

$23.79

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$9.44

The Trucktec Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$111.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$88.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$157.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

Zinc coated tubes protect against rust and corrosion

from

$263.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$157.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$2.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$38.99

from

$93.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$817.99

CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.

Product Features:

Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
Performance testing ensures perfect fit, function and reliable performance.
Computerized spool valve balancing ensures exceptional steering feel.
Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
Built to meet or exceed O.E.M. performance.

from

$621.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$623.65

Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:

OE quality and direct fit replacement
Remanufacture based on highest quality standards
Computerized tests insure that all products meet the OE performance specification.
Performance and quality approvals from OE steering gear and pump manufacturers world wide

from

$28.99

POWER STEERINGFILTER

from

$48.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$33.49

Stabilizer Bar Link

from

$30.99

Stabilizer Bar Link

from

$73.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$83.84

The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$48.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Coated or plated for corrosion protection
Ball joint is pre-greased
Easy access wrench flat allows for the use of a socket for easy installation and removal
Full ball stud

from

$91.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$195.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$225.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$224.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$127.99

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion

from

$125.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$123.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

Upgrade your 2004 Freightliner Sprinter 2500 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2004 Freightliner Sprinter 2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Freightliner or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Sprinter 2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 42 Steering and Chassis Parts for the 2004 Freightliner Sprinter 2500, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Sway Bars upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2004 Freightliner Sprinter 2500 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.01 to $964.99, with an average price of $160.59. Our 42 Steering and Chassis Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 2004 Freightliner Sprinter 2500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Freightliner Sprinter 2500, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Cardone Carquest Premium, and more. Cardone Steering and Chassis Parts start at just $31.99 and boast an impressive 4 stars average rating from customers. With 70 customer reviews and counting, our 2004 Freightliner Sprinter 2500 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Freightliner Sprinter 2500 is always ready to roll. We’re committed to providing you with everything you need to keep your Sprinter 2500 in top shape, all in one place. Start shopping confidently below for your 2004 Freightliner Sprinter 2500!

Best-Selling Power Steering Parts for 2004 Freightliner Sprinter 2500s

Enhance the driving experience in your Freightliner with 23 quality Power Steering Part components, starting at $2.99.

show more show less

from

$48.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$38.99

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$2.99

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$171.99

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$157.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$964.99

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

PWR Rack and Pinions are 100% NEW and Engineered In North America
All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
Precision Routed and Constructed Fluid Transfer Tubes
Manufactured to meet or exceed OE requirements
Engineering, test, and quality validation in the USA

from

$817.99

Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
Performance testing ensures perfect fit, function and reliable performance.
Computerized spool valve balancing ensures exceptional steering feel.
Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
Built to meet or exceed O.E.M. performance.

from

$672.99

NEW RACK & PINION

from

$623.65

OE quality and direct fit replacement
Remanufacture based on highest quality standards
Computerized tests insure that all products meet the OE performance specification.
Performance and quality approvals from OE steering gear and pump manufacturers world wide

from

$621.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$336.99

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
Supplied with a Pre-Installed Pulley, Reservoir, Reservoir Cap, as well as the required Installation Seals, Washers, and Instructions
Enables you to achieve a more efficient, durable, and professional installation

from

$157.99

Zinc coated tubes protect against rust and corrosion

from

$127.99

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion

from

$93.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$69.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$28.99

All Steering Power Filter

from

$28.99

All Steering Power Filter

from

$28.99

POWER STEERINGFILTER

from

$6.99

POWER STEERINGFILTER

Most Popular 2004 Freightliner Sprinter 2500 Sway Bars

Customize your Freightliner with 9 Sway Bars products like Sway Bar Link Kits and Sway Bar Bushings, all priced under $35.37.

show more show less

from

$12.49

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$35.37

TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:

Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
Provides improved fuel economy, lower emissions and excellent driving comfort
Reduce weight and damping vibrations
Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions

from

$26.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$21.75

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$21.51

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$21.33

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$20.82

Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
Provides improved fuel economy, lower emissions and excellent driving comfort
Reduce weight and damping vibrations
Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions

from

$6.80

The Lemfoerder Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$2.01

Sway Bar Mount

Top Picks for 2004 Freightliner Sprinter 2500 Tie Rods

Upgrade Freightliner Sprinter 2500s with top-quality Tie Rods parts, including 2 OEM and aftermarket selections for your 2004 model.

show more show less

from

$45.99

Tie Rod End

from

$75.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

In-Demand Ball Joints for 2004 Freightliner Sprinter 2500s

Select from 8 premium Ball Joints parts for your 2004 Freightliner Sprinter 2500, with prices ranging from $12.73 to $331.99.

show more show less

from

$188.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$331.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$224.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$199.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$195.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$111.99

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$41.47

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories

from

$12.73

Every FEQ ball joint is engineered to restore the handling of your vehicle to original equipment condition. With global manufacturing facilities being ISO 9001, ISO TS/16949 and ISO 14001 Certified, the processes and quality are maintained to the highest standards providing superior products.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering
Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

Top-Rated Steering and Chassis Parts Brands For Your 2004 Freightliner Sprinter 2500

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2004 Freightliner Sprinter 2500s. Below you’ll find some of our best rated Steering and Chassis Parts from Cardone and Carquest Premium, and more. Steering and Chassis Parts from these brands that fit a 2004 Sprinter 2500 start at just $2.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Cardone 2004 Freightliner Sprinter 2500 Steering and Chassis Parts

When it comes to maintaining or upgrading your 2004 Freightliner Sprinter 2500, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Cardone ticks all of those boxes. We offer a wide selection of Cardone Steering and Chassis Parts, specifically designed for the 2004 Freightliner Sprinter 2500. With over 8 Cardone brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $241.18. Plus, with over 62 customer reviews and an average rating of 4 stars, you can trust that our Cardone Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$171.99

This product is not rated

New Power Steering Pump

“”

from
$31.99

This product is not rated

Power Steering Filter

“”

from
$157.99

This product is not rated

Remanufactured Power Steering Pump

“”

Popular Carquest Premium 2004 Freightliner Sprinter 2500 Steering and Chassis Parts

Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2004 Freightliner Sprinter 2500 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2004 Sprinter 2500, Advance Auto Parts carries a full inventory of 6 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Freightliner in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range from $2.99 to $157.99, plus, with more than 8 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$2.99

This product is not rated

3/8" ID Return Hose (sold by each)

“”

from
$127.99

This product is not rated

Power Steering Pressure Hose Assembly, 16mm Female Bubble Flare x 16mm Male "O" Ring

“”

from
$157.99

This product is not rated

Power Steering End Fittings, 16mm Female Bubble Flare x 3/8" Beaded Tube

“”

FAQs for 2004 Freightliner Sprinter 2500 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2004 Freightliner Sprinter 2500s?

Out of 42 Steering and Chassis Parts that fit 2004 Freightliner Sprinter 2500s, the following parts are the top sellers:

3/8" ID Return Hose (sold by each) (18070570) – $2.99
3/8" I.D. Return Hose CPE (3867692) – $38.99
Power Steering Filter (10659735) – $31.99

What’s the price range for 2004 Freightliner Sprinter 2500 Steering and Chassis Parts?

Steering and Chassis Part prices for the 2004 Freightliner Sprinter 2500 start at $2.01 and go up to $964.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2004 Freightliner Sprinter 2500?

The average price for Steering and Chassis Parts for the 2004 Freightliner Sprinter 2500 is $160.59. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Freightliner Sprinter 2500 model years?

Yes, we currently carry Steering and Chassis Parts for 19 model years of Freightliner Sprinter 2500s between 2002 and 2021. Steering and Chassis Parts are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Steering and Chassis Parts for my 2004 Freightliner Sprinter 2500?

The cheapest 2004 Freightliner Sprinter 2500 Steering and Chassis Parts we carry in stock are:

Sway Bar Mount (12110687) – $2.01
3/8" ID Return Hose (sold by each) (18070570) – $2.99
Sway Bar Bushing (10771629) – $6.80
POWER STEERINGFILTER (50167394) – $6.99
Stabilizer Bar Bushing Kit (21880058) – $12.49

What types of Steering and Chassis Parts do you sell for my 2004 Freightliner Sprinter 2500?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2004 Freightliner Sprinter 2500:

Can I get help with 2004 Freightliner Sprinter 2500 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Freightliner Steering and Chassis Parts and more.

What is your return policy for Freightliner Sprinter 2500 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Freightliner Sprinter 2500 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Freightliner Sprinter 2500 Steering and Chassis Parts

Rare Parts – Sway Bar Fr Bush (Part No.RP19628)

Trucktec – Sway Bar Bushing (Part No.L1050295579TRC)

MOOG – Ball Joint (Part No.K7455)

Rare Parts – Ball Joint (Part No.RP11971)

Carquest Premium – Power Steering End Fittings, 16mm Female Bubble Flare x 3/8" Beaded Tube (Part No.34972)

Cardone – Remanufactured Power Steering Pump (Part No.20-1009)

Cardone – Remanufactured Power Steering Pump (Part No.20-1010)

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

Carquest Premium – 3/8" I.D. Return Hose CPE (Part No.36219)

Carquest Premium – 3/8" Beaded Tube (Part No.37988)

Cardone New – New Rack and Pinion Assembly (Part No.97-2145)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2145)

Maval – Complete Steering Rack, Remanufactured (Part No.M1000413408MAV)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

Cardone – Power Steering Filter (Part No.20-0058F)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

MOOG – Stabilizer Bar Link (Part No.K700914)

MOOG – Stabilizer Bar Link (Part No.K700913)

Rare Parts – Sway Bar Link (Part No.RP16755)

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010394480LEM)

Beck/Arnley – Tie Rod End (Part No.101-6881)

MOOG – Tie Rod End (Part No.ES800419)

Dorman – Suspension Control Arm (Part No.521-437)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621966)

Rare Parts – Control Arm with Ball Joint (Part No.RP12291)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Female Bubble Flare x 16mm Male "O" Ring (Part No.40240)

Carquest Premium – Power Steering Pressure Hose Assembly, 11mm Male Captive "O" Ring x 16mm Male "O" Ring (Part No.37756)

Rein – Power Steering Pressure Hose Assembly (Part No.PSH0349)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Carquest Premium – 3/8" I.D. Return Hose CPE (Part No.36219)

Cardone – New Power Steering Filter (Part No.20-0038F)

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

Cardone – Power Steering Filter (Part No.20-P038F)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Cardone New – New Power Steering Pump (Part No.96-1010)

Cardone – Remanufactured Power Steering Pump (Part No.20-1010)

PWR – New Hydraulic Power Rack and Pinion (Part No.42-1932)

Cardone New – New Rack and Pinion Assembly (Part No.97-2145)

Atlantic Automotive Eng – NEW RACK & PINION (Part No.3818N)

Maval – Complete Steering Rack, Remanufactured (Part No.M1000413408MAV)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2145)

PWR – New Power Steering Pump with Pulley & Reservoir (Part No.60-5584PR)

Carquest Premium – Power Steering End Fittings, 16mm Female Bubble Flare x 3/8" Beaded Tube (Part No.34972)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Female Bubble Flare x 16mm Male "O" Ring (Part No.40240)

Carquest Premium – 3/8" Beaded Tube (Part No.37988)

Carquest Premium – 3/8" I.D. Molded Return Hose (Part No.40498)

BBB Industries – Power Steering Filter (Part No.991-FLT4)

BBB Industries – Power Steering Filter (Part No.991-FLT2)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

MOOG – Stabilizer Bar Bushing Kit (Part No.K80776)

TRW – Stabilizer Link (Part No.L1030218696TRW)

MOOG – Stabilizer Bar Link (Part No.K80856)

Lemfoerder – Sway Bar Link (Part No.L1030218696LEM)

Lemfoerder – Sway Bar Link (Part No.L1030218697LEM)

Lemfoerder – Sway Bar Link (Part No.L1030298742LEM)

TRW – Stabilizer Link (Part No.L1030298742TRW)

Lemfoerder – Sway Bar Bushing (Part No.L1050295466LEM)

Febi – Sway Bar Mount (Part No.L1035935785FEB)

Driveworks – Tie Rod End (Part No.DW-ES3689)

MOOG – Tie Rod End (Part No.ES3689)

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK620752)

Rare Parts – Control Arm with Ball Joint (Part No.RP12292)

Rare Parts – Control Arm with Ball Joint (Part No.RP12291)

Dorman – Suspension Control Arm (Part No.521-438)

Dorman – Suspension Control Arm (Part No.521-437)

MOOG – Ball Joint (Part No.K7455)

TRW – Ball Joint (Part No.L2020311559TRW)

FEQ – Ball Joint (Part No.L2020311559FEQ)