2004 Ford Ranger Truck Beds

Essential 2004 Ford Ranger Truck Beds

Dorman – Weld-In Bed Floor Rust Repair Panel (Part No.999-999)

Weld-In Bed Floor Rust Repair Panel

from

$81.99
Repairing a rusted truck bed panel on your pickup is easy with high-quality sheet metal panels from Dorman. This truck bed repair panel is made to the same specifications as the original to ensure an exact match in fit and appearance on a range of vehicles.

Product Features:
  • Cost-effective replacement – this low-cost solution enables fixing the worn truck bed floor, rather than replacing the entire truck bed or fabricating a patch panel.
  • Application specific – made to match original bed material and design on certain Ford Ranger and Mazda B-Series trucks.
  • Clean installation – high-quality steel matches gauge of original, and is finished in weldable primer
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Covercraft – Cab Forward Truck Cover (Part No.C15896D6)

Cab Forward Truck Cover

from

$661.99
Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. Sunbrella provides protection and years of service in intense sun climates like Arizona and other areas of the Sunbelt, where UV rays can rapidly degrade the paint and interior. Because of the use of acrylic fibers, which are naturally UV resistant, Sunbrella has long been the recognized leader in longwearing marine fabrics for bimini tops, sail covers and deck enclosures. Besides marine uses, Sunbrella is also used for commercial awnings due to its ability to provide UV blockage, along with a rich, woven finish. The acrylic fibers are solution dyed, before the fabric is woven, to assure the color goes all the way through the fabric. Using a special finish process, the material is then softened for use as a truck cab cover fabric. The fabric is exceptionally strong and, coupled with its UV resistance, it also makes an excellent cover for RV’s and trailers that spend extended time stored outside.

Product Features:
  • Custom Protection for Front Half of Pickup
  • Great for Use with a Camper
  • Protects Interior From UV & Reduces Heat Build-up
  • Easy to Use
  • Cab Forward Covers Available in Multiple Fabrics
See More

Covercraft – Cab Forward Truck Cover (Part No.C15610D6)

Cab Forward Truck Cover

from

$661.99
Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. Sunbrella provides protection and years of service in intense sun climates like Arizona and other areas of the Sunbelt, where UV rays can rapidly degrade the paint and interior. Because of the use of acrylic fibers, which are naturally UV resistant, Sunbrella has long been the recognized leader in longwearing marine fabrics for bimini tops, sail covers and deck enclosures. Besides marine uses, Sunbrella is also used for commercial awnings due to its ability to provide UV blockage, along with a rich, woven finish. The acrylic fibers are solution dyed, before the fabric is woven, to assure the color goes all the way through the fabric. Using a special finish process, the material is then softened for use as a truck cab cover fabric. The fabric is exceptionally strong and, coupled with its UV resistance, it also makes an excellent cover for RV’s and trailers that spend extended time stored outside.

Product Features:
  • Custom Protection for Front Half of Pickup
  • Great for Use with a Camper
  • Protects Interior From UV & Reduces Heat Build-up
  • Easy to Use
  • Cab Forward Covers Available in Multiple Fabrics
See More

CARR – Truck Step (Part No.124997)

Truck Step

from

$437.99
Product Features:
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Todays Vehicles
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Innovative Stylish Design
  • Strong Construction To Hold Up Under Extreme Conditions
  • Exclusive New Multi Mount System
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
  • Limited Lifetime Material And Craftsmanship Warranty
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Xp7 Safety Yellow, Aluminum, 14" L (Part No.114997)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Xp7 Safety Yellow, Aluminum, 14" L

from

$449.99
With over 70 years of manufacturing excellence, CARR is a third generation business that remains firmly committed to serving you. All CARR accessories are manufactured for a precise fit for today vehicles. Our manufacturing processes allows us to design products that give your vehicle unique personal style and appeal. Our cast aluminum construction is time-proven for durability and strength. All CARR products carry a limited lifetime warranty.

Product Features:
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Rugged And Unique Tread Pattern Provides For Safe And Attractive Non-Slip Surface
  • Innovative Stylish Design
  • Strong Construction To Hold Up Under Extreme Conditions
  • Multi-Mount And Vehicle-Specific Mount Systems
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.124502)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum

from

$267.99
The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Textured, Xp7 Safety Yellow, Aluminum (Part No.104997)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Textured, Xp7 Safety Yellow, Aluminum

from

$281.99
With over 70 years of manufacturing excellence, CARR is a third generation business that remains firmly committed to serving you. All CARR accessories are manufactured for a precise fit for today vehicles. Our manufacturing processes allows us to design products that give your vehicle unique personal style and appeal. Our cast aluminum construction is time-proven for durability and strength. All CARR products carry a limited lifetime warranty.

Product Features:
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Rugged And Unique Tread Pattern Provides For Safe And Attractive Non-Slip Surface
  • Innovative Stylish Design
  • Strong Construction To Hold Up Under Extreme Conditions
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
See More

KAI – Truck Bed Panel (Part No.RRP499)

Truck Bed Panel

from

$152.99
New Standard Replacement Driver Side Lower Rear Bed Section

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Bed Panel (Part No.RRP498)

Truck Bed Panel

from

$152.99
New Standard Replacement Passenger Side Lower Rear Bed Section

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Westin – Platinum Oval Bed Rails (Part No.50-2040)

Platinum Oval Bed Rails

from

$256.99
Heavy duty 304 polished stainless steel. Flexible mounting system. Accommodates most stake pockets. Easy installation with no drilling required. Accentuates truck appeal. Drill mount hardware is included.

Product Features:
  • Heavy Duty 304 Polished Stainless Steel
  • Flexible Mounting System
  • Accommodates Most Stake Pockets
  • Easy To Install
  • No Drilling Required
  • Accentuates Truck Appeal
  • Drill Mount Hardware Included
  • Lifetime Warranty
See More

TrailFX – Soft Folding, 2 Folds/ 3 Panels, Lockable Using Tailgate Handle Lock (Part No.TFX3317)

Soft Folding, 2 Folds/ 3 Panels, Lockable Using Tailgate Handle Lock

from

$475.99
TrailFX Soft Folding Tonneaus offer a lightweight, yet durable solution to fulfill your transporting needs. This weather tight tonneau offers instant access to your truck bed. If you are transporting or storing cargo in your bed, these affordable covers install easily and keep your cargo safe and secure.

Product Features:
  • Lockable Using Tailgate Handle
  • High Quality Vinyl Skin With Aluminum Frame Provides Lasting And Durable Bed Protection
  • All Weather Seals Keep Your Truck Bed And Cargo Protected
  • Mounts Easily To Bed Rails Using C Clamps, No Drilling Or Tools Required
  • Woven Straps With Male Or Female Snap Connectors Hold Tonneau Cover 2/3 Open
See More

Extang – Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl (Part No.92630)

Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl

from

$599.99
The best selling soft Tri-Fold cover just got better. The Trifecta 2.0 has softer curves and sleek design that creates smoother, more contoured, low profile appearance. The tarp is constructed of heavy-duty, leather grained fabric with an integrated corner tuck system that has improved tarp tension and keeps your truck looking great. The newly redesigned frame, hinges, and corners provide more structural strength than before. Strongest in the industry, the frame is made of lightweight aircraft grade aluminum. The new MAX hinges are rugged and have a double pivot design. Our exclusive snap on seals eliminate adhesive and remain in place for ultimate weather protection.

Product Features:
  • Lockable Via Tailgate Lock
  • Heavy Duty Leather Grain Fabric Provides Clean Lines And A Low Profile Appearance
  • Engineered Cab Clamps Attach Directly To Your Bed Flanges Without Damage And Alteration To Your Bed Caps
  • EZ-Lock Clamps Requires Minimal Effort To Operate And Self-Locks In Position When Attached To The Bed Flange For Added Security
  • Clamping System Attaches To Your Truck In Seconds For Easy Installation
  • Rear Tail Section Clamps Operate With Spring Action Handle For Instant Fasten And Release, Clamp Conveniently Stows Away Inside Rail When Not In Use
  • Easy To Use Folding Design With Smooth Sleek Looks
See More

Lund – TONNEAUS (Part No.968113)

TONNEAUS

from

$579.99
TONNEAUS

TrailFX – Hard Folding, 2 Folds/ 3 Panels, Low Profile, 2 Riding Positions, Frp (Part No.TFX3527)

Hard Folding, 2 Folds/ 3 Panels, Low Profile, 2 Riding Positions, Frp

from

$1172.99
Keep your belongings safe and secure when transporting them from one point to another. TrailFX Hard Folding Tonneau Covers can be used in two riding positions and allow easy access when you need it. Designed with quality materials and easy-to-operate mechanisms, these covers are just as stylish as they are functional.

Product Features:
  • Mounts Easily To Bed Rails Using Traditional Brackets And Slam Latches, No Drilling Required
  • Lockable Using Tailgate Handle Lock
  • Drain Tubes Prevent Mold And Mildew Buildup Beneath The Cover
  • Cover Secures Using Woven Snap-Buckle Straps
  • Cover Is Manufactured With A Subtle, Gloss Black Textured Finish For Weather Resistance And A Sleek Look
  • Strong Fiberglass Reinforced Polymer Top Skin And Aluminum Bottom Skin Provides Lasting And Durable Protection
  • 3-Panel Tonneau Cover Keeps Cargo Safe And Secure During Transport
  • Choose Between 2 Riding Positions When Hauling Cargo, Fully Closed Or 2/3 Open
See More

Extang – Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl (Part No.92638)

Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl

from

$534.99
The best selling soft Tri-Fold cover just got better. The Trifecta 2.0 has softer curves and sleek design that creates smoother, more contoured, low profile appearance. The tarp is constructed of heavy-duty, leather grained fabric with an integrated corner tuck system that has improved tarp tension and keeps your truck looking great. The newly redesigned frame, hinges, and corners provide more structural strength than before. Strongest in the industry, the frame is made of lightweight aircraft grade aluminum. The new MAX hinges are rugged and have a double pivot design. Our exclusive snap on seals eliminate adhesive and remain in place for ultimate weather protection.

Product Features:
  • Lockable Via Tailgate Lock
  • Heavy Duty Leather Grain Fabric Provides Clean Lines And A Low Profile Appearance
  • Engineered Cab Clamps Attach Directly To Your Bed Flanges Without Damage And Alteration To Your Bed Caps
  • EZ-Lock Clamps Requires Minimal Effort To Operate And Self-Locks In Position When Attached To The Bed Flange For Added Security
  • Clamping System Attaches To Your Truck In Seconds For Easy Installation
  • Clamping System Attaches To Your Truck In Seconds For Easy Installation
See More

Lund – Genesis Tri-Fold Tonneau (Part No.95014)

Genesis Tri-Fold Tonneau

from

$448.99
The LUND® Genesis Tri-Fold Tonneau cover features a low-profile design and black leather appearance premium vinyl top. The Genesis Tri-Fold design combines the flexibility of a Tri-Fold and the performance of a full, one-piece seamless cover to protect your gear and cargo. The Genesis Tri-Fold also utilizes a rigid, black powder-coated aluminum sub-frame, commercial-grade clamping system and tailgate seal. GenesisTri-Fold allows 100% access to your entire truck bed with an integrated clip and strap system that allows the vehicle to operate with the top in the open (folded) position. The cover comes fully-assembled, requires no drilling or special hardware and can be installed in less than five minutes. Each Genesis Tri-Fold is customized for a precise fit on the specific make, model, year and bed size of your truck.

Product Features:
  • Comes Completely Assembled And Installs In Under 2 Min.
  • Double-Sided Fabric With Black Matte Finish
  • Is Tear Resistant and Of Superior Quality
  • All Black Rails/Bows With Strong, Rigid Extrusions
  • Provide Classy Look, Durability, Ease Of Operation
  • Easy To Use Clamps With Quick Attach Cam Action Design
  • Provide Tension and Security to The Cover
  • Includes Adapter Kit For Use On Cargo Mgmt Systems
See More

Lund – Genesis Elite Tri-Fold Tonneau (Part No.95814)

Genesis Elite Tri-Fold Tonneau

from

$472.99
Lund’s NEW Black·Pearl Tri-Fold Tonneau Cover offers superior styling

Product Features:
  • Offers Supreme Styling And Simplicity
  • Enhanced Durability And Resistance To Elements
  • Debris Rinses Off Easily
  • Installs In Minutes
  • Includes Free Tailgate Seal
See More

Lund – Lund Hard Fold Tonneau (Part No.969354)

Lund Hard Fold Tonneau

from

$1073.99
The new Lund Hard Fold tonneau cover is our latest addition to our top selling premium tonneau covers. The Hard Fold has been designed exclusively with an aluminum under body frame covered with the highest marine grade cover on top. Maximum security is provided through impact resistant panels that simplifies installation and operation. To open, simply unclamp the locking handles and fold the cover forward. The nylon straps hold the cover in an open position when you need to haul your cargo. This cover comes completely assembled – no drilling required. Installation time is less than 10 minutes and is backed by our limited lifetime warranty.

Product Features:
  • 6063 All Aluminum Sub-Panels
  • Double-Sided/Tear Resistant
  • 24.5 oz. Marine Grade Vinyl Material
  • Black Epoxy Coated Sub-Panel And Support Beams
  • Comes Completely Assembled
  • Scuff And Dent Resistant Hard Fold Design
  • Simple Clamping System For Securing Your Cover
  • Provides Tension And Security
  • Evenly Distributed Weight Rating Of 350 lbs.
  • Removes In Less Than 3 Minutes
See More

Lund – TONNEAUS (Part No.958113)

TONNEAUS

from

$599.99
TONNEAUS

KAI – Truck Cab Corner (Part No.RRP3528)

Truck Cab Corner

from

$88.99
New Standard Replacement Passenger Side Cab Corner, Standard Cab Models, 15.5 X 8 X 6

Product Features:
  • Standard Cab Models, 15.5 X 8 X 6, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Corner (Part No.RRP3527)

Truck Cab Corner

from

$89.99
New Standard Replacement Driver Side Cab Corner, Standard Cab Models, 15.5 X 8 X 6

Product Features:
  • Standard Cab Models, 15.5 X 8 X 6, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

2004 Ford Ranger Truck Beds

Maybe you’re in the middle of a full rebuild of that 2004 Ford Ranger. Maybe you just need a couple of Truck Beds. Either way, Advance Auto Parts has 19 different Truck Beds in our inventory ranging from $81.99 to $1,073.99. That means you can find the exact parts or products you need to keep that 2004 Ford Ranger running smoothly.

Truck Beds are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Ford Ranger. Dorman, Lund, and Extang are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Truck Beds for your 2004 Ford Ranger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Truck Beds to keep your 2004 Ford Ranger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Truck Beds Brands To Make Your 2004 Ford Ranger Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Ford Ranger demands trusted brand parts and products to keep it running. Many trusted brands of Truck Beds make up Advance Auto Parts’ inventory, and all are ready to help make your Ranger the best it can be. Be sure to browse some of our top Truck Beds brands and parts.

FAQs for 2004 Ford Ranger Truck Beds

What are the most purchased Truck Beds for the 2004 Ford Ranger?

Out of 19 Truck Beds for the 2004 Ford Ranger, the most popular in our inventory are:
Weld-In Bed Floor Rust Repair Panel
from $81.99
This product is not rated
Weld-In Bed Floor Rust Repair Panel
Truck Bed Floor Patch Panels
Genesis Roll Up Tonneau
from $444.99
This product is not rated
Genesis Roll Up Tonneau
Tonneau Covers
Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl
from $599.99
This product is not rated
Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl
Tonneau Covers