2004 Ford Expedition Oxygen Sensor
Your 2004 Ford Expedition might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Oxygen Sensor product you desperately need.
We currently carry 21 Oxygen Sensor products to choose from for your 2004 Ford Expedition, and our inventory prices range from as little as $51.99 up to $79.21.
On top of low prices, Advance Auto Parts offers 4 different trusted brands of Oxygen Sensor products for the 2004 Ford Expedition. We only sell parts from trusted brands like Motorcraft so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 1,806 reviews on our Oxygen Sensor products for the 2004 Ford Expedition from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Oxygen Sensor stock in-person!
Oxygen Sensor for Your 2004 Ford Expedition
Search through our amazing selection of Oxygen Sensor products for your 2004 Ford Expedition to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
Motorcraft - O2 Sensor (Part No. DY-1401)
Read 1 review(s)Review snapshot ® by PowerReviews
-
The only 02 sensor you should put back in your Ford.
The only 02 sensor you should put back in your Ford.
Submitted 2021-01-03
By Mustang Mike
From Sussex County,Delaware
Straight forward to change. Simply unplug the sensor use a 7/8 wrench or 02 tool. Just unscrew the sensor out of the exhaust pipe and screw in the new one. Then plug in the new sensor and that's it. If you have a check engine light for the old sensor erase the code. If you do not have the tool to erase the code your local shop can.
Bottom Line recommended
from $67.99
View Product -
-
DENSO - Oxygen Sensor: Upstream, 4 Wire, 10.63" Long, Heated, Exact Fit (Part No. 234-4046)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 1 review(s)Review snapshot ® by PowerReviews
-
Trust me
Trust me
Submitted 2017-07-20
By Douglas
From undisclosed
The only problem i have with this sensor is that it goes in a 2005 Ford Taurus. If you are buying this to fix a 2005 Ford Taurus, do yourself a favor. Dont buy the sensor, push the Taurus into the nearest body of water instead. Take the bus to work. Trust me. Good sensor though
Bottom Line NULL
from $54.99
View Product -
DENSO - Oxygen Sensor: 4 Wire, 18.82" Long, Heated, Exact Fit (Part No. 234-4127)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 1 review(s)Review snapshot ® by PowerReviews
-
good
good
Submitted 2012-01-22
By j
From ne
fit like OEM
Bottom Line recommended
from $51.99
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010100917ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
Read 1 review(s)Review snapshot ® by PowerReviews
-
good
good
Submitted 2012-01-22
By j
From ne
fit like OEM
Bottom Line recommended
from $54.46
View Product -
NTK - Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (Part No. 22500)
DescriptionNTK is the world's largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle's on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:- OEM QUALITY: NTK is the world's largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Read 3 review(s)Review snapshot ® by PowerReviews
-
Oxygen sensor
Oxygen sensor
Submitted 2021-09-20
By william
From Undisclosed
Works good. Check engine light been off since I changed it.
Bottom Line NULL
-
Works as intended
Works as intended
Submitted 2021-06-14
By david
From Undisclosed
Appears to work well, come with grease already on the threads , nice.
Bottom Line NULL
-
I would buy again.
I would buy again.
Submitted 2021-05-19
By Emmanuel
From Undisclosed
Fast delivery.
Bottom Line NULL
from $56.99
View Product -
Bosch - Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit (Part No. 15717)
DescriptionBosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Read 3 review(s)Review snapshot ® by PowerReviews
-
Yes
Yes
Submitted 2022-02-06
By Juan
From Georgia
Very good product and dependable and high quality
Bottom Line recommended
-
O yes
O yes
Submitted 2021-06-12
By juan
From Undisclosed
Good product quality and fitment
Bottom Line NULL
-
Now my van is saving me on gas
Now my van is saving me on gas
Submitted 2021-02-10
By Sergio
From Undisclosed
Pleasure doing business with you al
Bottom Line NULL
from $57.99
View Product -
NTK - Switching Oxygen Sensor: 4 Wire, 15.5" Long, Heated, Direct Fit (Part No. 22060)
DescriptionNTK is the world's largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle's on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:- OEM QUALITY: NTK is the world's largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Read 3 review(s)Review snapshot ® by PowerReviews
-
Awesome and will my this part again & I totally recommend
Awesome and will my this part again & I totally recommend
Submitted 2021-04-04
By Ronnie
From Undisclosed
Awesome & works perfectly on my 2004 mustang gt!!!!
Bottom Line NULL
-
Yes
Yes
Submitted 2021-02-14
By Melanie
From Undisclosed
Better gas mileage
Bottom Line NULL
-
Yes
Yes
Submitted 2021-01-15
By Teresa
From Undisclosed
Great
Bottom Line NULL
from $58.99
View Product -
Bosch - Oxygen Sensor: 4 Wire, 18.94" Long, Heated, Exact Fit (Part No. 15718)
DescriptionBosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Read 3 review(s)Review snapshot ® by PowerReviews
-
Yes
Yes
Submitted 2021-07-27
By Angela
From Undisclosed
Its a good sensor.
Bottom Line NULL
-
Highly recommended
Highly recommended
Submitted 2021-04-15
By Jacob
From Undisclosed
2006 Mustang GT 4 6l Very accurate and precise Oxygen sensor. Engjne performance is highly dependant on O2 sensor.
Bottom Line NULL
-
Would buy again! Love Advance Auto!!
Would buy again! Love Advance Auto!!
Submitted 2020-11-25
By Allen
From Undisclosed
This was purchased for my 2004 Ford Explorer. Had a O2 sensor code. I think this was a " downstream sensor".. Remember , if you have two sensors , one before and one after the catalytic converter, they have different computer settings. Make sure you read the description on the Advance Auto website ... If you get the wrong one , the error code will not go away , and car still will not run right. My light went out immediately after restarting. Computer read the new sensor!! Happiness!! God Bless all shade tree mechanics!! Keith
Bottom Line NULL
from $55.99
View Product -
Bosch - Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No. 15729)
DescriptionBosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
Read 3 review(s)Review snapshot ® by PowerReviews
-
Not user friendly
Not user friendly
Submitted 2020-08-20
By Mike from AL
From AL
Instructions were very confusing. You must re-use your old sensor's connector and splice it onto the new sensor using the connector included with new sensor. It was a pain to wire. I don't trust the connection will hold up. I wish I would have bought one already assembled. I guess I need to read the details next time. I didn't realize they sold garbage like this until I got it home, so that's why I didn't know you had to splice the old connector to the new sensor. There is no way I would buy this again.
Bottom Line not recommended
-
Advance is my "Go To store"!
Advance is my "Go To store"!
Submitted 2019-10-03
By Daniel
From Undisclosed
Worked right out of the box. Wiring was a snap since it allowed a way to take care of the burnt connectors>
Bottom Line NULL
-
I would buy this item again
I would buy this item again
Submitted 2017-12-24
By john
From undisclosed
Work great
Bottom Line NULL
from $67.99
View Product -
DENSO - Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No. 234-4212)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 1 review(s)Review snapshot ® by PowerReviews
-
Good price. Hard to install for Subaru
Good price. Hard to install for Subaru
Submitted 2013-09-27
By Need _to_fix_my_subaru
From Sterling Heights, MI
Although there were instructions to install on most car manufacturers, there were no wiring conversions for Subaru. This made the install very difficult.
Bottom Line not recommended
from $61.99
View Product -
Bosch - Oxygen Sensor (Part No. C501041270BOS)
DescriptionThe Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
- Fine particle filter. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
from $75.83
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010112406ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $56.47
View Product -
DENSO - Universal Oxygen Sensor (Part No. C5010100825ND)
DescriptionDenso Universal First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Critical Installation Notes: Please read the installation directions included in the box before removal of the original oxygen sensor form the vehicle. - Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $79.21
View Product -
Bosch - Universal Oxygen Sensor (Part No. C5010100329BOS)
DescriptionThe Bosch universal oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
- Fine particle filter. Critical Installation Notes: Please read the installation directions included in the box before removal of the original oxygen sensor form the vehicle. - Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering. Installation Instructions: Universal Oxygen Sensors require assembly of electrical connectors and cannot be returned once wire end connectors have been crimped...
from $72.54
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010137222ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $63.89
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010112408ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $62.80
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010100874ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $61.33
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010137203ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $60.82
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010100914ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $60.20
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010112335ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $58.81
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010112405ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $58.68
View Product
FAQs for 2004 Ford Expedition Oxygen Sensor Products
What are the most popular Oxygen Sensor for the 2004 Ford Expedition?
With 4 brands you can trust, our most popular Oxygen Sensor products for the 2004 Ford Expedition parts are:What are the best aftermarket Oxygen Sensor products for the 2004 Ford Expedition?
See what past customers had to say about our highest-rated Oxygen Sensor products for the 2004 Ford Expedition: