Name: Remanufactured Fuel Injection Control Module (FICM)
Brand: Carquest Premium
SKU: AE11222
Price: 664.99 USD

from

$664.99

CARQUEST premium Fuel Injection Control Module (FICM) for the Ford Power Stroke 6.0L is completely disassembled and all electronic components are tested. Common failure points in the original design are corrected. All defective components are replaced with upgraded components. The unit is pre-programmed with the latest software available which improves injector operation (NO REFLASH REQUIRED). Each unit is 100% tested under multiple operating conditions prior to shipment. Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.

Product Features:

Each unit is 100% tested to OE specifications
Preprogrammed plug-and-play ready which reduces installation time and cost
Upgraded module prevents common failure modes inherent with OE design
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$217.99

This fuel injector control module is designed to match the fit and function of the original module on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration
Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board
No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future

from

$8.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$32.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$33.49

ACDelco Professional Multi Purpose Relay is a high quality aftermarket replacement component for one or more of the following vehicle systems: hvac. This premium aftermarket relay is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$249.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$120.99

This vacuum pump matches the fit and function of the original equipment pump. Made of durable materials for reliable service, this replacement pump is built to ensure reliable operation of vacuum-operated vehicle functions.

Product Features:

Ideal replacement – this vacuum pump matches the fit and function of the original equipment pump to restore operation of vacuum-operated functions
Durable construction – this vacuum pump is made of quality materials to ensure reliable performance and a long service life
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$10.49

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Available for most Ford Lincoln and Mercury vehicle applications.
Specifically designed for each application for optimum performance and easy installation.
Designed to meet precise Ford O.E. engineering standards for fit, functionality and durability.
High-strength materials used for long, trouble-free service life.
Ford O-Rings provide effective sealing against water, oil, gases, chemicals and harmful contaminants.
Engineered to maintain reliable sealing under harsh conditions, including temperature and pressure extremes.

from

$6.99

This fuel line clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this fuel line clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$96.99

This complete gasket and hardware kit includes all the necessary components for the installation of the Exhaust Gas Recirculation (EGR) Cooler.

Product Features:

Includes intake manifold gaskets and installation hardware
Includes OE coolant hose
Direct fit OE replacement

from

$24.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$47.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$57.28

Motorcraft Air Charged Temperature Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.

Product Features:

Ensures long lasting durability
Reliable under extreme conditions
Made of high quality material
Resists fatigue failure
Offers superior service life

from

$320.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$80.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$96.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Inputs from the camshaft, throttle position and crankshaft sensors provide the Power-train Control Module (PCM) the information needed to make the vehicle perform efficiently.
The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
Designed for long service life under harsh under-hood conditions.
Designed with OE electrical connectors ensuring proper fits.
Application-specific, one-size-fits-all design.

from

$4.07

The Mahle Idle Control Valve Gasket is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Original equipment design and quality
Utilizes OE equivalent or better materials
Meets or exceeds OEM specifications

from

$374.99

Fuel filler neck leaking? This replacement fuel filler neck is precision-engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:

Direct replacement – this fuel filler neck is made to match the original equipment on specific vehicles
Durable construction – made of corrosion-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$88.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$332.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Fuel Injector Assembly consists of a cylindrical housing with an electric solenoid-controlled plunger valve mounted inside
When the solenoid is electrically actuated by the engine control module, the plunger valve opens, allowing fuel to reach the spray head that injects atomized fuel into the cylinder to be mixed with oxygen for combustion.
The resulting explosive air/fuel mixture is compressed by the upward moving piston and ignited by a spark plug or glow plug to power the engine.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into every Motorcraft Fuel Injector Assembly, ensuring the most current technology.
Motorcraft Fuel Injector Assemblies are built to last: corrosion resistant, pressure-tested and engineered to perform under extreme conditions and meet Ford’s exacting OE specifications, performance and quality standards.

from

$87.99

A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience

from

$20.99

This fuel injector rail plug replaces the original part on diesel vehicles. Made from high quality, durable materials, it keeps high pressure oil in the oil rails to power the fuel injectors.

Product Features:

Direct replacement – this fuel injector rail plug replaces the original part on diesel vehicles
Necessary repair – fixes leaking high-pressure oil tubes that cause the engine to run poorly or not at all
Common fix – O-rings require replacement when going into the oil galley for service
Related parts – high pressure oil stand pipe sold separately

from

$94.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$32.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$15.99

This EGR pressure feedback hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this EGR pressure feedback hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to pressure, heat and cracking
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$317.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$53.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$2.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features: