2004 Ford E-450 Super Duty Tools
Find Your Specific 2004 Ford E-450 Super Duty Tools
Below you will find various in-demand Ford Tools, components and accessories for your 2004 E-450 Super Duty. Advance Auto Parts has popular E-450 Super Duty parts like Drivetrain Axle Tools Diagnostic Tools and more. You’ll also find aftermarket and OEM Tools for other E-450 Super Duty model years including
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019,
2022 and more. Select a category of 2004 Ford E-450 Super Duty Tools below and start saving instantly.
Popular 2004 Ford E-450 Super Duty Tools Categories
Essential Tools for 2004 Ford E-450 Super Duties
Yukon Gear – Yoke Holder Tool (Part No.56066)
from
$159.99
Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota. No return.
Product Features:
See More
Product Features:
- Yoke holder tool
- Firmly holds pinion yoke in place allowing for easier pinion preload setting
Yukon Gear – Differential Housing Spreader For Dana Housings (Part No.56035)
from
$709.99
Differential Housing Spreader for Dana 30, 44, 60, 61, 70, and 80. The Yukon Differential Housing Spreader allow you to safely & easily set carrier bearing preload, saving time and money. No return. This tool is not compatible with Corvette housings.
Product Features:
See More
Product Features:
- Housing spreader
- Works on Dana 30, 44, 60, 70 and 80 applications
- Allows for proper carrier bearing preload to be set
Yukon Gear – Inner Axle Side Seal Installation Tool (Part No.56073)
from
$228.99
Inner axle side seal installation tool for Dana 30, 44, 60. No return.
Product Features:
See More
Product Features:
- Front inner axle seal installation tool
- Works with Dana 30, 44 and 60 front differentials
Carquest Premium – Multi-Use Connector (Part No.PTC1711)
from
$76.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Yukon Gear – Dana 80 & GM/Chrysler 11.5" Spindle Id Boring Tool For 37 & 38 Spline Axle Conversion (Part No.56069)
from
$949.99
NO RETURN Dana 80 & GM/Chrysler 11.5″ spindle ID boring tool for 37 & 38 spline axle conversion. Cutting bit diameter is 1.630″.
Product Features:
See More
Product Features:
- Spindle boring tool
- Fits Dana Spicer 80 and AAM 11.5″
Yukon Gear – Spindle Boring Tool Replacement Cutter For Dana 80 Yt H32 (Part No.56068)
from
$547.99
Dana 80 replacement cutter for spindle boring tool. Bit diameter is 1.630″.
Product Features:
See More
Product Features:
- Spindle boring tool replacement bit
- Fits Dana Spicer 80 and AAM 11.5″ design
Yukon Gear – Multi-Shim Driver (Part No.56077)
from
$198.99
Yukon multi-shim driver. This shim driver tool works on a variety of applications including: – GM 7.5″, 8.2″, 8.5″, 8.6″, 12P, 12T, – Ford 7.5″, 8.8″, 9.75″, 10.25″, 10.5″, – Model 35, Dana 44HD, Dana 44 JK, and more! No return.
Product Features:
See More
Product Features:
- Carrier Multi-shim driver
- Allows for easier carrier shim installation without damaging carrier shims
Upgrade your 2004 Ford E-450 Super Duty with Top-Quality Tools
When it comes to maintaining or upgrading your 2004 Ford E-450 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Tools are key to keeping your E-450 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Tools for the 2004 Ford E-450 Super Duty, designed to meet your needs without breaking the bank.
From
Drivetrain Axle Tool
replacements to
Diagnostic Tools
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Tools for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Tools for your 2004 Ford E-450 Super Duty at great prices.
Our Tools inventory for this model
ranges from just $76.99 to $949.99, with
an average price of $410.42.
Our 7 Tools in stock come from 2 trusted brands, so you’re sure to find the right part for your 2004 Ford E-450 Super Duty without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Tool upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2004 Ford E-450 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your E-450 Super Duty in top shape, all in one place.
Start shopping confidently below for your 2004 Ford E-450 Super Duty!
Best-Selling Drivetrain Axle Tools for 2004 Ford E-450 Super Duties
Enhance the driving experience in your Ford with 6 quality Drivetrain Axle Tool components, starting at $159.99.
Yukon Gear – Inner Axle Side Seal Installation Tool (Part No.56073)
from
$228.99
Inner axle side seal installation tool for Dana 30, 44, 60. No return.
Product Features:
See More
Product Features:
- Front inner axle seal installation tool
- Works with Dana 30, 44 and 60 front differentials
Yukon Gear – Multi-Shim Driver (Part No.56077)
from
$198.99
Yukon multi-shim driver. This shim driver tool works on a variety of applications including: – GM 7.5″, 8.2″, 8.5″, 8.6″, 12P, 12T, – Ford 7.5″, 8.8″, 9.75″, 10.25″, 10.5″, – Model 35, Dana 44HD, Dana 44 JK, and more! No return.
Product Features:
See More
Product Features:
- Carrier Multi-shim driver
- Allows for easier carrier shim installation without damaging carrier shims
Yukon Gear – Dana 80 & GM/Chrysler 11.5" Spindle Id Boring Tool For 37 & 38 Spline Axle Conversion (Part No.56069)
from
$949.99
NO RETURN Dana 80 & GM/Chrysler 11.5″ spindle ID boring tool for 37 & 38 spline axle conversion. Cutting bit diameter is 1.630″.
Product Features:
See More
Product Features:
- Spindle boring tool
- Fits Dana Spicer 80 and AAM 11.5″
Yukon Gear – Differential Housing Spreader For Dana Housings (Part No.56035)
from
$709.99
Differential Housing Spreader for Dana 30, 44, 60, 61, 70, and 80. The Yukon Differential Housing Spreader allow you to safely & easily set carrier bearing preload, saving time and money. No return. This tool is not compatible with Corvette housings.
Product Features:
See More
Product Features:
- Housing spreader
- Works on Dana 30, 44, 60, 70 and 80 applications
- Allows for proper carrier bearing preload to be set
Yukon Gear – Spindle Boring Tool Replacement Cutter For Dana 80 Yt H32 (Part No.56068)
from
$547.99
Dana 80 replacement cutter for spindle boring tool. Bit diameter is 1.630″.
Product Features:
See More
Product Features:
- Spindle boring tool replacement bit
- Fits Dana Spicer 80 and AAM 11.5″ design
Yukon Gear – Yoke Holder Tool (Part No.56066)
from
$159.99
Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota. No return.
Product Features:
See More
Product Features:
- Yoke holder tool
- Firmly holds pinion yoke in place allowing for easier pinion preload setting
Most Popular 2004 Ford E-450 Super Duty Diagnostic Tools
Customize your Ford with 1 Diagnostic Tools products
like Diagnostic Test Connectors, all
priced under $76.99.
Carquest Premium – Multi-Use Connector (Part No.PTC1711)
from
$76.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
FAQs for 2004 Ford E-450 Super Duty Tools
Which Tools are best-sellers for 2004 Ford E-450 Super Duties?
Out of 7 Tools that fit 2004 Ford E-450 Super Duties, the following parts are the top sellers:
- Inner Axle Side Seal Installation Tool (11642737) – $228.99
- Multi-Shim Driver (11642181) – $198.99
- Spindle Boring Tool Replacement Cutter For Dana 80 Yt H32 (11642686) – $547.99
What’s the price range for 2004 Ford E-450 Super Duty Tools?
Tool prices for the 2004 Ford E-450 Super Duty start at $76.99 and go up to $949.99 for the most premium parts.
What’s the average price of a Tool for a 2004 Ford E-450 Super Duty?
The average price for Tools for the 2004 Ford E-450 Super Duty is $410.42. Keep in mind the variety of part types within our Tool category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Tools for other Ford E-450 Super Duty model years?
What are the cheapest Tools for my 2004 Ford E-450 Super Duty?
The cheapest 2004 Ford E-450 Super Duty Tools we carry in stock are:
- Multi-Use Connector (12441355) – $76.99
- Yoke Holder Tool (11642810) – $159.99
- Multi-Shim Driver (11642181) – $198.99
- Inner Axle Side Seal Installation Tool (11642737) – $228.99
- Spindle Boring Tool Replacement Cutter For Dana 80 Yt H32 (11642686) – $547.99
What types of Tools do you sell for my 2004 Ford E-450 Super Duty?
As of 11/2/25, these are some of the most in-demand types of Tools for a 2004 Ford E-450 Super Duty:
Can I get help with 2004 Ford E-450 Super Duty Tool orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Tools and more.
What is your return policy for Ford E-450 Super Duty Tools?
Advance Auto Parts keeps returns simple. For new Ford E-450 Super Duty Tools and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
