2004 Ford E-450 Super Duty Fuel and Emissions Systems

Name: Evaporative Emissions Canister Vent Valve
Brand: Dorman
SKU: 911-216
Price: 105.99 USD
Rating: 4.0 (2 reviews)

Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 2004 E-450 Super Duty. Advance Auto Parts has popular E-450 Super Duty parts like Fuel Pumps, Fuel Injectors, Air Flow Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other E-450 Super Duty model years including 2014, 2015, 2016, 2017, 2018, 2019, 2021, 2022, 2023 and more. Select a category of 2004 Ford E-450 Super Duty Fuel and Emissions Systems below and start saving instantly.

Popular 2004 Ford E-450 Super Duty Fuel and Emissions Systems Categories

Fuel Pump Driver Modules

Air Flow Meters and Mass Air

EGR Pressure Feedback Sensors

Fuel Pumps

Oxygen Sensors

Vapor Canister Vent Solenoids

Vacuum Reservoirs

Canister Purge Solenoids

Fuel Tanks

EGR Valves

Fuel Pump Hanger Assemblies

Idle Air Parts

Ambient Air Temperature Sensor Connectors

EGR Pressure Feedback Hoses

Air Charge Temperature Sensors

Fuel Injector O-Ring Kits

Fuel Injection Idle Air Control Valve Gaskets

Fuel Injector Gaskets

Fuel Tank Filler Necks

Fuel Tank Vent Valves

Mass Air Flow Sensor Connectors

Fuel Line Connectors

Oxygen Sensor Connectors

EGR Valve Gaskets

EGR Vacuum Regulator Solenoid Connectors

Fuel Cap Tester Adapters

EGR Sensor Connector

Fuel Tank Vent Valve Seals

Vacuum Actuators

Essential Fuel and Emissions Systems for 2004 Ford E-450 Super Duties

from

$105.99

A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.

Product Features:

Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
Quality construction – manufactured from premium materials for a long service life
Excellent value – original equipment function at a lower price
Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance

from

$79.99

This fuel pump driver module is a direct replacement for the original equipment module. Designed to match the original fit and function, it features a plug & play connection for an easy installation.

Product Features:

Direct replacement – this fuel pump driver module matches the fit and function of the original equipment module to restore vehicle operation
Plug and play installation – this fuel pump driver requires no modifications or special tools to install
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Quality tested – vehicle simulation tested to ensure performance

from

$16.79

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, andor engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$13.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$63.99

REGULATOR-WINDW

from

$116.99

Carquest Premium exhaust gas recirculation (EGR) valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Our Carquest Premium EGR valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium EGR valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium EGR valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$89.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$77.99

The Exhaust Gas Recirculation (EGR) Pressure Sensor is a device used to monitor the operation or exhaust flow through the EGR valve system during EGR normal operation.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$36.49

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$46.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$561.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$45.99

This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$52.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$2000.00

New Platinum Pro Fuel Tank, Rear, 37 Gallon

Product Features:

Rear, 37 Gallon
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$78.99

This replacement A/C vacuum actuator is engineered to match the fit and function of the original equipment vacuum actuator on specified vehicles. Made of quality materials, it’s designed for a reliable service life.

Product Features:

Ideal replacement – this A/C vacuum actuator directly replaces the original equipment actuator on specified vehicle years, makes and models
Durable construction – this vacuum actuator is made of quality materials for reliable performance
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$8.49

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.99

This EGR pressure feedback hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this EGR pressure feedback hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to pressure, heat and cracking
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:

Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance
Quality construction – manufactured from premium materials for a long service life
Saves money – replace only the part, not the entire assembly
Excellent value – original equipment quality at a lower price

from

$32.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time

from

$11.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$3.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$245.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$64.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$161.99

O2 Sensor

from

$12.99

This fuel tank vent valve seal acts as a gasket between the fuel tank and rollover valve to prevent debris or moisture from entering the tank, and fuel or vapor from exiting. Check the product dimensions and vehicle fitment information to select the correct seal for your application.

Product Features:

Direct replacement – this fuel tank vent valve seal is designed to match the fit and function of the original equipment gasket in specified applications
Ideal solution – engineered to securely seal the vent valve to the fuel tank when the original seal is leaking or has failed from exposure to fuel
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$91.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$75.99

Carquest Premium idle air control valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Idle air control valves, or sometimes known as idle air motors, are used to maintain the engine speed at idle by precisely adjusting the amount of air allowed to enter the intake. Our Carquest Premium idle air control (IAC) valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium idle air control valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium idle air control valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Upgrade your 2004 Ford E-450 Super Duty with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2004 Ford E-450 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your E-450 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 49 Fuel and Emissions Systems for the 2004 Ford E-450 Super Duty, designed to meet your needs without breaking the bank. From Fuel Pump replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2004 Ford E-450 Super Duty at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.99 to $2,000.00, with an average price of $124.42. Our 49 Fuel and Emissions Systems in stock come from 12 trusted brands, so you’re sure to find the right part for your 2004 Ford E-450 Super Duty without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Ford E-450 Super Duty, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like FELPRO, NTK, Dorman, and more. FELPRO Fuel and Emissions Systems start at just $2.99 and boast an impressive 4.6 stars average rating from customers. NTK and Dorman also bring quality to the table, with Fuel and Emissions Systems available starting at $15.99, and at an average 4.6 stars rating. With 273 customer reviews and counting, our 2004 Ford E-450 Super Duty Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Ford E-450 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your E-450 Super Duty in top shape, all in one place. Start shopping confidently below for your 2004 Ford E-450 Super Duty!

Best-Selling Fuel Pumps for 2004 Ford E-450 Super Duties

Enhance the driving experience in your Ford with 9 quality Fuel Pump components, starting at $36.49.

show more show less

from

$228.99

Carquest Premium fuel pump hanger assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump hanger assemblies are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump hanger assemblies are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$253.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$278.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$322.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$64.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$395.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$395.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$243.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$36.49

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Most Popular 2004 Ford E-450 Super Duty Fuel Injectors

Customize your Ford with 8 Fuel Injectors products like Air Flow Meters and Mass Air, Fuel Injector Gaskets, and Fuel Injector O-Ring Kits, all priced under $222.99.

show more show less

from

$2.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$89.99

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$222.99

Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
Delphi OE technology validated to match the vehicle applications

from

$111.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$8.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$2.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Top Picks for 2004 Ford E-450 Super Duty Air Flow Sensors

Upgrade Ford E-450 Super Duties with top-quality Air Flow Sensors parts, including 5 OEM and aftermarket selections for your 2004 model.

show more show less

from

$32.99

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time

from

$13.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$16.79

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$29.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$69.99

Wire Assembly

In-Demand Oxygen Sensors for 2004 Ford E-450 Super Duties

Select from 4 premium Oxygen Sensors parts for your 2004 Ford E-450 Super Duty, with prices ranging from $27.99 to $72.99.

show more show less

from

$72.99

O2 Sensor

from

$66.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$64.99

NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$27.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Most Sold 2004 Ford E-450 Super Duty Fuel Tanks

Explore our best-selling Ford parts for the 2004 E-450 Super Duty among 4 OEM and aftermarket options starting from $12.99.

show more show less

from

$82.99

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$2000.00

New Platinum Pro Fuel Tank, Rear, 37 Gallon

Product Features:

Rear, 37 Gallon
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$34.49

Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.

Product Features:

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

from

$12.99

Direct replacement – this fuel tank vent valve seal is designed to match the fit and function of the original equipment gasket in specified applications
Ideal solution – engineered to securely seal the vent valve to the fuel tank when the original seal is leaking or has failed from exposure to fuel
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Top-Rated Fuel and Emissions Systems Brands For Your 2004 Ford E-450 Super Duty

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2004 Ford E-450 Super Duties. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO, NTK, and Dorman, and more. Fuel and Emissions Systems from these brands that fit a 2004 E-450 Super Duty start at just $2.99 and are rated as high as 4.6 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2004 Ford E-450 Super Duty Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2004 Ford E-450 Super Duty, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 2004 Ford E-450 Super Duty. With over 3 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.99, with an average price of just $5.66. Plus, with over 118 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $2.99

(8)

Fuel Injection Throttle Body Mounting Gasket

“It fit 05 f150 perfectly like it should.”

from $8.49

(109)

Fuel Injector O-Ring Kit

“Good parts”

from $5.49

(1)

Fuel Injection Throttle Body Mounting Gasket

“Really easy to put on”

Popular NTK 2004 Ford E-450 Super Duty Fuel and Emissions Systems

NTK auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2004 Ford E-450 Super Duty owner should feel confident when installing genuine NTK parts in their vehicle. To ensure the best fit and performance for your 2004 E-450 Super Duty, Advance Auto Parts carries a full inventory of 2 NTK Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these NTK Fuel and Emissions Systems range from $64.99 to $66.99, plus, with more than 82 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $66.99

(44)

Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit

“Fast delivery.”

from $64.99

(38)

Switching Oxygen Sensor: 4 Wire, 15.5" Long, Heated, Direct Fit

“Fixed my Ram truck.”

FAQs for 2004 Ford E-450 Super Duty Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2004 Ford E-450 Super Duties?

Out of 49 Fuel and Emissions Systems that fit 2004 Ford E-450 Super Duties, the following parts are the top sellers:

O2 Sensor (11977682) – $72.99
Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (20501734) – $66.99
Switching Oxygen Sensor: 4 Wire, 15.5" Long, Heated, Direct Fit (20472184) – $64.99

What’s the price range for 2004 Ford E-450 Super Duty Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2004 Ford E-450 Super Duty start at $2.99 and go up to $2,000.00 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2004 Ford E-450 Super Duty?

The average price for Fuel and Emissions Systems for the 2004 Ford E-450 Super Duty is $124.42. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford E-450 Super Duty model years?

Yes, we currently carry Fuel and Emissions Systems for 20 model years of Ford E-450 Super Duties between 2003 and 2026. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Fuel and Emissions Systems for my 2004 Ford E-450 Super Duty?

The cheapest 2004 Ford E-450 Super Duty Fuel and Emissions Systems we carry in stock are:

Fuel Injection Throttle Body Mounting Gasket (15780628) – $2.99
Fuel Injection Idle Air Control Valve Gasket (12547257) – $2.99
THROTTLE BODY GASKET SET (20688609) – $3.29
Gasket (10307523) – $3.99
Exhaust Gas Recirculation (EGR) Valve Gasket (15780615) – $4.79

What are the top-rated Fuel and Emissions Systems that fit the 2004 Ford E-450 Super Duty?

Out of 273 reviews by customers, our 2004 Ford E-450 Super Duty Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2004 Ford E-450 Super Duty and their top-rated products:

Idle Air Control Parts
- Gasket (10307523) – $3.99
- THROTTLE BODY GASKET SET (20688609) – $3.29

What types of Fuel and Emissions Systems do you sell for my 2004 Ford E-450 Super Duty?

As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2004 Ford E-450 Super Duty:

Can I get help with 2004 Ford E-450 Super Duty Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.

What is your return policy for Ford E-450 Super Duty Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Ford E-450 Super Duty Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Ford E-450 Super Duty Fuel and Emissions Systems

Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-216)

Dorman – Fuel Pump Relay Module (Part No.601-240)

ACDelco – Multi-Purpose Pigtail (Part No.PT2164)

Carquest Premium – Multi-Use Connector (Part No.ABA3461)

Motorcraft – REGULATOR-WINDW (Part No.WPT-359)

Carquest Premium – EGR Valve (Part No.EGC1024)

Spectra Premium – Mass Air Flow Sensor (Part No.MA147)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61420)

Carquest – Exhaust Gas Recirculation (EGR) Pressure Sensor (Part No.42C1001)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12419)

Carquest Premium – Multi-Use Connector (Part No.PTA1191)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1478)

Dorman – Help – Vacuum Storage Canister (Part No.47995)

Carquest Premium – Multi-Use Connector (Part No.PTA3077)

KAI – Fuel Tank (Part No.FTK010677)

Dorman – Heater Blend Door Actuator (Part No.926-180)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Dorman – Help – High Temp Emissions Hoses (Part No.46019)

Dorman – Springlock Fuel Line Connector- 11mm x 5/16In. Barbed Male (Part No.800-130)

NTK – Multi-Purpose Temperature Sensor (Part No.EF0016)

Victor Reinz – EGR Valve Gasket (Part No.71-13488-00)

MAHLE Original – Gasket (Part No.G31324)

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Seal, Nuts, Washers, Retainer Clips (Part No.HP10081)

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPE1375)

Motorcraft – O2 Sensor (Part No.DY-1185)

Dorman – Fuel Tank Vent Valve Seal Grommet (Part No.926-820)

Spectra Premium – Fuel Filler Neck (Part No.FN871)

Carquest Premium – Idle Air Control Valve (Part No.ACC1038)

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump, Sending Unit and Strainer (Part No.HS2437620)

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump, Sending Unit and Strainer (Part No.HS2510436)

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump, Sending Unit and Strainer (Part No.HS2496125)

Delphi – Fuel Pump Hanger Assembly: With Float Arm (Part No.HP10195)

Carquest Premium – Fuel Pump Driver Module (Part No.FPC1087)

Delphi – Fuel Pump Hanger Assembly: With Float Arm (Part No.HP10196)

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Seal, Nuts, Washers, Retainer Clips (Part No.HP10216)

Carquest Premium – Fuel Pump Driver Module (Part No.FPC1093)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12419)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61050)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61103)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Spectra Premium – Mass Air Flow Sensor (Part No.MA147)

Delphi – Mass Air Flow Sensor (Part No.AF10131)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6211)

Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)

Victor Reinz – Fuel Injection Idle Air Control Valve Gasket (Part No.71-13739-00)

NTK – Multi-Purpose Temperature Sensor (Part No.EF0016)

Carquest Premium – Multi-Use Connector (Part No.ABA3461)

ACDelco – Multi-Purpose Pigtail (Part No.PT2164)

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1064)

Motorcraft – Wire Assembly (Part No.WPT-322)

Motorcraft – O2 Sensor (Part No.DY-1401)

NTK – Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (Part No.22500)

NTK – Switching Oxygen Sensor: 4 Wire, 15.5" Long, Heated, Direct Fit (Part No.22060)

Carquest Premium – Multi-Use Connector (Part No.PTA1116)

Spectra Premium – Fuel Filler Neck (Part No.FN858)

KAI – Fuel Tank (Part No.FTK010677)

Carquest Premium – Fuel Tank Vent Valve (Part No.ECC3001)

Dorman – Fuel Tank Vent Valve Seal Grommet (Part No.926-820)