2004 Ford E-450 Econoline Differentials

Essential 2004 Ford E-450 Econoline Differentials

Yukon Gear – Billet Replacement Yoke For Dana 60 And 70 With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41138)

Billet Replacement Yoke For Dana 60 And 70 With 29 Spline Pinion And A 1350 U/Joint Size

from

$414.99
Yukon billet replacement yoke for Dana 60 and 70 with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60 and 70
  • 29 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • U-bolt style
See More

Yukon Gear – Seal Housing For Ford 10.25" & 10.5", Zip Locker, With O-Rings (Part No.34040)

Seal Housing For Ford 10.25" & 10.5", Zip Locker, With O-Rings

from

$78.99
Seal housing for Ford 10.25″ & 10.5″, Zip locker, with o-rings.

Product Features:
  • Seal housing for Ford 10.25″ and 10.5″
  • Includes o-rings
See More

Yukon Gear – Bearing Race Driver (Part No.56020)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M802011 race
  • All steel construction
See More

Yukon Gear – Pinion Install Kit For ’07 & Down Ford 10.5" Differential (Part No.13101)

Pinion Install Kit For '07 & Down Ford 10.5" Differential

from

$399.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1999-2006 Ford 10.5″
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 70 And 80 With 35 Spline Axles (Part No.16093)

Replacement Standard Open Spider Gear Kit For Dana 70 And 80 With 35 Spline Axles

from

$247.99
Yukon replacement standard open spider gear kit for Dana 70 and 80 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Dana Spicer 70 and 80 open differential with 35 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Motive Gear – Differential Gear Install Kit (Part No.D80IK)

Differential Gear Install Kit

from

$143.99


Product Features:
  • MINI INSTALL KIT DANA 80
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Tracloc Positraction Clutch Set For 3 Pinion Design For 10.5" Ford (Part No.16101)

Tracloc Positraction Clutch Set For 3 Pinion Design For 10.5" Ford

from

$529.99
TracLoc positraction clutch set for 3 pinion design for 10.5″ Ford.

Product Features:
  • Clutch kit
  • Fit Ford 10.5″ Trac Loc positraction
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

USA Standard Gear – Master Overhaul Kit Dana 70 Differential (Part No.37022)

Master Overhaul Kit Dana 70 Differential

from

$494.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 70
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, thread locker, marking compound with brush and gasket.
See More

Felpro – Differential Cover Gasket (Part No.RDS 6014)

Differential Cover Gasket

from

$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Zip Locker For Ford 10.25" & 10.5", Full Float Only (Part No.34025)

Zip Locker For Ford 10.25" & 10.5", Full Float Only

from

$1487.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

Product Features:
  • Fits Ford 10.25″ and 10.5″
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 70 In A 4.56 Ratio (Part No.24317)

High Performance Replacement Ring & Pinion Gear Set For Dana 70 In A 4.56 Ratio

from

$634.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. thick gear for 4.10 and down carrier.

Product Features:
  • Fits Dana Spicer 70
  • 10.50″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 4.56 ratio
  • Thick gear for 4.11 and down carrier
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-803146)

Tapered Roller Bearing

from

$27.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Replacement Complete Shim Kit For Dana 80 (Part No.55028)

Replacement Complete Shim Kit For Dana 80

from

$121.99
Product Features:
  • Complete shim kit for Dana Spicer 80
  • 4.375″ O.D. pinion bearing application only
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

FAG US – SHAFT SEAL (Part No.SS2923)

SHAFT SEAL

from

$19.79
SHAFT SEAL

Yukon Gear – Steel Spool For Dana 80 With 35 Spline Axles, 4.10 & Up (Part No.32172)

Steel Spool For Dana 80 With 35 Spline Axles, 4.10 & Up

from

$747.99
Yukon Performance steel spool for 8Dana 80 with 35 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 80 with 35 spline axles
  • 4.10 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Differential (Part No.26046)

Differential

from

$994.99
Differential

Yukon Gear – Replacement Baffle For Dana 70 & 70HD (Part No.33003)

Replacement Baffle For Dana 70 & 70HD

from

$7.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 70 and 70HD
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

National – Bearings (Part No.15245)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – 1541H Alloy Left Hand Replacement Rear Axle For Dana 70 (Part No.21462)

1541H Alloy Left Hand Replacement Rear Axle For Dana 70

from

$467.99
Yukon 1541H alloy left Hand replacement rear axle for Dana 70 with a length of 43 inches and 35 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full float axle.

Product Features:
  • 35 spline
  • 8 x 3.96″ bolt pattern
  • 43.0″ long
  • Fits Dana Spicer 70 in 1996-2000 Ford E350
  • Right hand side
See More

Yukon Gear – Chrome Replacement Cover For Dana 80 (Part No.32006)

Chrome Replacement Cover For Dana 80

from

$69.99
Chrome replacement cover for Dana 80.

Product Features:
  • Fits Dana Spicer 80
  • Chrome
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)

Extra-Large Clamshells For Large Applciations

from

$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.

Product Features:
  • Extra Large clamshell
  • Fits carrier bearing puller
See More

Dorman – Differential Clutch Kit (Part No.697-417)

Differential Clutch Kit

from

$283.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
  • Quality materials – all components are built for reliable longevity and performance.
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Popular 2004 Ford E-450 Econoline Differentials Categories

2004 Ford E-450 Econoline Differentials

Maybe you’re in the middle of a full rebuild of that 2004 Ford E-450 Econoline. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 310 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 2004 Ford E-450 Econoline running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Ford E-450 Econoline. Yukon Gear, National, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2004 Ford E-450 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 51 reviews in this category, some of the top rated parts include Tapered Cone Wheel Bearing Assembly with 4.0 stars and Differential Ring and Pinion with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 2004 Ford E-450 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2004 Ford E-450 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Ford E-450 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your E-450 Econoline the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Front Differential Cover Gaskets categories, plus more. For a 2004 Ford E-450 Econoline, our most popular Felpro Differentials include:
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
Front Differential Cover Gaskets

Top 2004 Ford E-450 Econoline Differentials from National

National products are another trusted brand when it comes to Differentials for your 2004 Ford E-450 Econoline. Popular National parts include:
Bearings
from $9.99
(8)
Bearings
Rear Differential Pinion Bearings

FAQs for 2004 Ford E-450 Econoline Differentials

What are the most purchased Differentials for the 2004 Ford E-450 Econoline?

Out of 310 Differentials for the 2004 Ford E-450 Econoline, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Taper Bearing Set
from $13.79
(4)
Taper Bearing Set
Differential Bearings
Pinion Crush Sleeves
from $5.99
This product is not rated
Pinion Crush Sleeves
Differential Crush Sleeves

What are the top-rated 2004 Ford E-450 Econoline Differentials?

Top-rated Differentials for your 2004 Ford E-450 Econoline based on customer reviews/ratings are:
Tapered Cone Wheel Bearing Assembly
from $16.99
(2)
Tapered Cone Wheel Bearing Assembly
“Worked sell”
Differential Ring and Pinion
from $245.99
(1)
Differential Ring and Pinion
“You get a good set of gears for a good price. Found same set other places for a lot more money. Would recommend this .”
Ford 10.25" & 10.5" Cover Gasket
from $13.99
(1)
Ford 10.25" & 10.5" Cover Gasket
“how the hell am i supposed to know what size and shape my differential cover gasket is?dana or ford.why isn’t there a vin entry somewhere on the webpa”