2004 Dodge Sprinter 2500 Drive Shafts and Axles
More 2004 Dodge Sprinter 2500 Drive Shafts and Axles
Find your specific 2004 Dodge Sprinter 2500 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2004 Dodge Sprinter 2500 Drive Shafts and Axles
Timken – Wheel Bearing (Part No.K8000311408TIM)
from
$165.24
Timken fuel efficient bearings are used in automotive axles to improve fuel economy, reduce weight, lower operating temperatures, minimize noise and increase reliability. Engineered surfaces help protect bearing components by minimizing skidding and sliding damage while withstanding small-particle contamination.
Product Features:
See More
Product Features:
- OE Quality
- Made from quality Timken certified steel
- Design features original equipment technology that optimizes bearing performance and lengthens maintenance intervals
- Design allows bearings to carry evenly distributed loads
- Power dense design reduces bearing weight
Driveworks – Tapered Roller Bearing (Part No.S-516010)
Dorman – Rear Drive Shaft (Part No.936-016)
from
$941.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Cardone – Drive Shaft: Not Greaseable, Direct Replacement (Part No.65-3026)
from
$812.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – Rear Drive Shaft: OE Fix (Part No.936-013)
from
$1176.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Rear Driveshaft Assembly
- Rear Drive Shaft: OE Fix
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Dorman – Rear Drive Shaft: OE Fix (Part No.936-014)
from
$1179.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Rear Driveshaft Assembly
- Rear Drive Shaft: OE Fix
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Yukon Gear – Rear Wheel Seal For SRW Dodge Sprinter Van (Part No.30159)
from
$61.99
Rear wheel seal for SRW Dodge Sprinter Van.
Product Features:
See More
Product Features:
- Rear wheel seal
- Fits Sprinter van with single rear wheel
SKF – Wheel Seal (Part No.K8010286741SKF)
from
$21.31
Wheel Seal
Spicer – Center Support (Part No.X-10012-00)
from
$330.99
Center Support
Corteco – Driveshaft Support (Part No.K1030459666CFW)
from
$210.40
Driveshaft Support
National – Multi Purpose Bearing (Part No.HB-88554)
from
$105.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Spicer – Center Support (Part No.X-10013-00)
from
$308.99
Center Support
Timken – Driveshaft Support (Part No.K10301420232TIM)
from
$233.94
Driveshaft Support
Lemfoerder – Driveshaft Support (Part No.K1030284883LEM)
from
$115.70
The Lemfoerder Driveshaft Support is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6078)
from
$92.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to DODGE 03-06; FRHT 03-06;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2003-2006
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.7680 INCH / 45 MM
- CENTERLINE: 2.75 INCH / 70 MM
- MOUNT WIDTH: 7.62 INCH / 194 MM
- STYLE: HORSESHOE
Anchor – Center Support Bearing Motor Mount: Front, 1 Piece (Part No.6081)
from
$64.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to DODGE 07-09; FRHT 07-13; MERCEDES 10-13;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2007-2013
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.8440 INCH / 46.8 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 7.62 INCH / 194 MM
Dorman – Driveshaft Center Support Bearing (Part No.934-042)
from
$375.99
This drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance..
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles.
- Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6065)
from
$96.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to DODGE 94-03;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1994-2003
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- INVERTED THREADED HOLE MOUNT
- THREADS: 7/16 – 14
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
National – Multi Purpose Seal (Part No.223020)
from
$5.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Popular 2004 Dodge Sprinter 2500 Drive Shafts and Axles Categories
2004 Dodge Sprinter 2500 Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 2004 Dodge Sprinter 2500. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 15 different Drive Shafts and Axles in our inventory ranging from $5.49 to $1,179.99. That means you can find the exact parts or products you need to keep that 2004 Dodge Sprinter 2500 running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Dodge Sprinter 2500. National, Yukon Gear, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 2004 Dodge Sprinter 2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2004 Dodge Sprinter 2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 2004 Dodge Sprinter 2500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Dodge Sprinter 2500 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Sprinter 2500 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Dorman Drive Shafts and Axles
We carry Dorman parts in our stock across Drive and Prop Shaft Assemblies categories, plus more. For a 2004 Dodge Sprinter 2500, our most popular Dorman Drive Shafts and Axles include:
FAQs for 2004 Dodge Sprinter 2500 Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 2004 Dodge Sprinter 2500?
Out of 15 Drive Shafts and Axles for the 2004 Dodge Sprinter 2500, the most popular in our inventory are:
