2004 Dodge Ram 3500 Transfer Case Fluids

Valvoline ATF+4 is a full-synthetic transmission fluid specifically engineered to protect and prolong the life of (FCA) Fiat Chrysler automatic transmissions. It is officially licensed and approved by FCA and is fully back-serviceable and can be used wherever ATF+3, ATF+2 or ATF+ is specified. Recommended for use in the following applications: Mopar ATF+ MS 7176, ATF+2 MS 7176, ATF+3 and ATF+4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
• Enhanced Oil Stability: Resists oil breakdown 10-times better than industry standards, providing consistent performance and reliability.
• Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

Product Features:

• Synthetic blend 15W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
• Ideal for on-highway fleets, construction, and agricultural machinery, and diesel pickup trucks including high-power vehicles that require resistance to heat and stress
• Triple Protection Plus technology offers better low-temperature flow, which delivers excellent equipment protection, long engine life, and maintains viscosity control under high temperatures
• Delivers good engine cleanliness and protection against piston deposits, ensuring engine and component reliability at extended oil drain intervals
• Advanced low-ash formulation helps control the blocking or poisoning of exhaust after-treatment devices, helping maintain vehicle emission compliance and engine fuel efficiency
• Controls engine wear 37 percent better than the maximum wear requirements in API CK-4 engine wear tests
• Limited warranty valid up to 10 years or 300,000 miles (whichever comes first) if you exclusively use Shell Rotella T5 Synthetic Blend heavy-duty engine oil
• Meets or exceeds the following industry specifications: API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4, SN; ACEA E11; JASO DH-2
• Meets or exceeds the following OEM specifications: Caterpillar ECF-2, ECF-3; Cummins CES 20086, 20081; Detroit Fluid Specification (DFS) 93K222, 93K218; Allison TES 439; DTFR 150100 (prey. MB 228.31); Deutz DOC III-18 LA
• Deutz DOC III-18 LA; Ford WSS-M2C171-F1; MACK EO-S 4.5, EO-O Premium Plus; MAN M 3775; MTU Category 2.1; Volvo VDS 4.5, VDS-4
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency & longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard.
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

Shell Rotella T5 15W-40 Synthetic Blend diesel engine oil with Triple Protection Plus technology uses synthetic base oils plus advanced additive technology to provide protection against wear, deposits, and oil breakdown. Triple Protection Plus technology offers better low-temperature flow, which delivers excellent equipment protection, long engine life, and maintains viscosity control under high temperatures. The premium synthetic base oil components help improve cold starting and low-temperature performance without compromising engine protection or durability. Shell Rotella T5 15W-40 goes beyond CK-4 wear limits, delivering an average of 37% better than the maximum wear requirements (calculated average based on API CK-4 wear test results). It’s suitable for a wide range of heavy-duty engine applications, and is an excellent choice for on-highway fleets, construction, agriculture, and diesel pick-up trucks, including high-power vehicles where resistance to increased heat and stress is required. (Shell Rotella Limited Warranty: Valid up to 10 years or 300,000 miles (whichever comes first) if you exclusively use Shell Rotella T5 Synthetic Blend heavy-duty engine oil. Terms and conditions apply. See Rotella.Shell.com/warranty for details.)

Product Features:

• Synthetic blend 15W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
• Ideal for on-highway fleets, construction, and agricultural machinery, and diesel pickup trucks including high-power vehicles that require resistance to heat and stress
• Triple Protection Plus technology offers better low-temperature flow, which delivers excellent equipment protection, long engine life, and maintains viscosity control under high temperatures
• Delivers good engine cleanliness and protection against piston deposits, ensuring engine and component reliability at extended oil drain intervals
• Advanced low-ash formulation helps control the blocking or poisoning of exhaust after-treatment devices, helping maintain vehicle emission compliance and engine fuel efficiency
• Controls engine wear 37 percent better than the maximum wear requirements in API CK-4 engine wear tests
• Limited warranty valid up to 10 years or 300,000 miles (whichever comes first) if you exclusively use Shell Rotella T5 Synthetic Blend heavy-duty engine oil
• Meets or exceeds the following industry specifications: API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4, SN; ACEA E11; JASO DH-2
• Meets or exceeds the following OEM specifications: Caterpillar ECF-2, ECF-3; Cummins CES 20086, 20081; Detroit Fluid Specification (DFS) 93K222, 93K218; Allison TES 439; DTFR 150100 (prey. MB 228.31);
• Deutz DOC III-18 LA; Ford WSS-M2C171-F1; MACK EO-S 4.5, EO-O Premium Plus; MAN M 3775; MTU Category 2.1; Volvo VDS 4.5, VDS-4
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

T4 Triple Protection 15W-40 Diesel Engine Oil delivers advanced performance and reliability for hardworking diesel engines. This synthetic blend oil is engineered to provide enhanced wear protection, improved deposit control, and exceptional cleanliness, ensuring your engine operates efficiently under demanding conditions. With its advanced formula, it offers superior protection against oil oxidation, helping to maintain optimal performance over time. Designed specifically for diesel engines, it supports sustained emission control system durability, making it compatible with particulate filters and after-treatment systems. The 15W-40 SAE weight ensures reliable performance across a range of temperatures, adapting seamlessly to varying driving conditions. Whether you’re tackling heavy-duty tasks or long hauls, this oil is built to keep your engine running smoothly while extending its lifespan.

Product Features:

• Enhanced protection against oxidation.
• Enhanced wear protection
• Improved deposit control/cleanliness
• Sustained emission control system durability in particulate filters and after-treatment systems. (Compared to prior Shell Rotella Triple Protection 15W-40.)
• Provides enhanced protection against oil oxidation for more efficient operation

Formerly known as Shell Rotella® T Triple Protection, Shell Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil is the most technically advanced Shell Rotella® formulation ever. This 15W-40 motor oil uses advanced additive technology to protect under the most severe engine conditions found in modern, low-emission engines and older hard-working diesel engines. It effectively sustains emissions control system durability where diesel particulate filters and after-treatment systems are used. Plus, it provides enhanced protection against viscosity loss due to shear and improved oil aeration compared to the previous formulation. Shell Rotella® Triple Protection Technology. Shell Rotella® T4 15W-40 heavy duty engine oil uses a proprietary formula exclusive to Shell. It is designed to provide protection in three critical areas: – Acid control helps protect against corrosion from acids formed as fuel burns and the oil ages. – Deposit control helps keep engines clean for optimum performance and long life. – Wear control helps keep moving metal engine surfaces apart for a longer life. For Every Hardworking Need. With its wide range of specifications, and approvals from many of the world’s leading engine makers, Shell Rotella® T4 15W-40 heavy duty oil is an excellent choice for on-highway fleets, general haul, construction, agriculture, public-transport operators, diesel pickup trucks, including high-power vehicles where resistance to increased heat and stress is required.

Product Features:

• Triple Protection® from wear, deposits and oil breakdown, this conventional Diesel Engine Oil provides exceptional wear protection for heavy duty engines for longer life
• Formulated with advanced additive technology, which is engineered for superior engine cleanliness throughout the oil drain interval
• Provides increased shear stability for better viscosity control and optimal engine oil pressure
• Heightens emission control system durability and improves oil aeration
• Provides enhanced protection against oil oxidation for more efficient operation
• For technical questions, contact our Technical Help Desk at 1-(800) BEST-OIL or (800) 237-8645 Option 3, 1; or with complete Year/Make/Model information for a recommendation.

Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 5 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity. 

Product Features:

• Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
• Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology
• HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
• Reduces friction and metal-to-metal contact for peak engine performance
• Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up

Shell Rotella® T4 Triple Protection® 15W-40 Diesel Engine Oil delivers advanced performance and reliability for heavy-duty diesel engines. This synthetic blend oil is engineered to provide enhanced protection against oxidation, wear, and deposits, ensuring your engine stays cleaner and operates more efficiently. Designed for sustained durability, it supports emission control systems, including particulate filters and after-treatment systems, making it ideal for modern diesel engines. With improved deposit control and cleanliness, this oil helps maintain peak engine performance under demanding conditions. Its 15W-40 SAE weight ensures optimal viscosity for a wide range of operating temperatures, making it a versatile choice for various driving environments. Built on the trusted heritage of Triple Protection®, this oil adapts to your engine’s needs, offering hard-working protection that keeps your equipment running smoothly. Perfect for those who demand reliability and efficiency, this 55-gallon supply is a cost-effective solution for maintaining your fleet or heavy-duty machinery.

Product Features:

• 
  
  

Product Features:

• Enhanced protection against oxidation
• Enhanced wear protection
• Improved deposit control/cleanliness
• Sustained emission control system durability in particulate filters and after-treatment systems. (Compared to prior Shell Rotella® Triple Protection® 15W-40.)
• Provides enhanced protection against oil oxidation for more efficient operation

High Performance 75W-90 Full Synthetic Gear Oil is engineered to deliver exceptional transmission performance under demanding conditions. Its fully synthetic composition ensures excellent viscosity and temperature stability, providing reliable lubrication across a wide range of operating environments. Designed with outstanding seal compatibility and high pressure-absorption capability, this gear oil reduces gearshift resistance for smoother transitions and minimizes transmission noise for a quieter driving experience. The advanced formula offers excellent wear resistance and corrosion protection, safeguarding your transmission components against aging and breakdown. With superior shear stability and friction behavior, it maintains consistent performance while resisting viscosity breakdown, ensuring optimal shift quality in all conditions. Ideal for a variety of manual transmissions, this 1-liter gear oil is a durable and high-value solution for enhancing your vehicle’s efficiency and longevity.

Product Features:

• Excellent viscosity/temperature properties
• Outstanding seal compatibility
• Excellent resistance to aging
• Excellent wear resistance
• High pressure-absorption capability
• Wide viscosity range
• Reduces gearshift resistance
• Excellent corrosion protection
• Reduces transmission noise