2004 Dodge Ram 3500 Air Intakes

Original equipment throttle bodies often fail from moisture and oil intrusion and failed internal electronics. This Dorman OE FIX throttle body features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures.

Product Features:

• Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
• New construction – 100% new aluminum, not remanufactured, for reliability and the convenience of no core charge
• Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
• Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience

All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.

Product Features:

• Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
• Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.
• 100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance.
• Each unit is guaranteed to fit and function like the original.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
• 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
• Designed to meet or exceed all OEM specifications in fit, form & function
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
• 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
• Designed to meet or exceed all OEM specifications in fit, form & function
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
• 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
• Designed to meet or exceed all OEM specifications in fit, form & function
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

The Engine Air Intake Heater is an electric heat grid located under the carburetor or throttle body and is designed to further vaporize fuel entering the intake manifold during cold startup and cold operating conditions.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

The Engine Air Intake Heater is an electric heat grid located under the carburetor or throttle body and is designed to further vaporize fuel entering the intake manifold during cold startup and cold operating conditions.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

This engineered intake tube increases air flow and velocity by controlling the air intake dynamics. This is a very simple bolt-on product and requires no cutting or drilling.

Product Features:

• Uses Pro 5R Filter For Maximum Air Flow
• Rotomolded Plastic Tube For Maximum Air Flow
• Increased Horsepower And Torque
• Improved Throttle Response

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function
• Includes all parts needed to complete the repair

This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.

Product Features:

• Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
• Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
• Contents: Upper Intake Manifold Gasket; Lower Intake Manifold Gaskets; Throttle body gasket; Thermostat; Thermostat O Ring; Thermostat Gasket; Intake Manifold Bolts with Thread Locker; Coolant Tube

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
• ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
• REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
• ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
• REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

The BladeRunner intake manifold represents the next generation in intake manifold design. The BladeRunner intake manifold uses a unique MDV (Multiple Directional Vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast A356-T6 aluminum and uses a proprietary internal bolt design to help increase the flow and provide a solid seal void of leaks or deformities. the BladeRunner comes with up to 5 ports for nitrous injections, gauges and other accessories used by hardcore enthusiasts. In recent testing the BladeRunner intake manifold outflowed the factory intake by 32.9% and produced 17hp and 50lbs. x ft torque at 1975rpm. This intake is specifically designed to provide increased intake volume and velocity.

Product Features:

• Multiple Directional Van Technology For Increased Air Velocity
• Cast A356-T6 Aluminum Construction
• 5 Aux. Port Pads For Use w/Gauges/Temp Sensors/Nitrous Systems
• Pass Through Installation Bold Design

The BladeRunner intake manifold represents the next generation in intake manifold design. The BladeRunner intake manifold uses a unique MDV (Multiple Directional Vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast 808 aluminum alloy, this manifold uses a proprietary internal bolt design to help increase the flow and provide a solid seal void of leaks or deformities. The BladeRunner comes with 2 ports for nitrous injection, gauges and other accessories use d by hardcore enthusiasts. The manifold allows for the retention of the stock EGR valve. In recent testing the BladeRunner intake manifold outflowed the factory intake by 34% and resulting in gains of up to 11 HP and 27 lbs. x ft. of torque. Patented MDV (Multiple Directional Vane) Technology: To increase air velocity, the BladeRunner intake manifold uses aFe Powers patented MDV (Multiple Directional Vane) Technology that splits the air into multiple streams for increased performance and improved throttle response. 808 Aluminum Construction: The BladeRunner intake manifold is constructed of 808 aluminum alloy for light weight and high strength. A black powder coat finish is added for styling and extra durability. Five Auxiliary Ports Pads: This intake manifold comes with 5 auxiliary port pads (2-tapped at 1/8″ NPT) for use with gauges, temp sensors or nitrous oxide systems. Pass-Through Bolt Design: The BladeRunner intake manifold uses Allen head bolts that pass through for maximum air volume. Hassle-Free Installation: This intake manifold comes complete with all necessary hardware and bolts to the factory location for a hassle-free installation. This system uses the factory dipstick location. Note: Gaskets not included. Please see part number 46-10075 to purchase.

Product Features:

• Multiple Directional Van Technology For Increased Air Velocity
• Cast 808 Aluminum Alloy Construction
• Outflows Factory Intake By 34%
• 2 Tapped 1/8 in. NPT Ports For Accessories

This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.

Product Features:

• Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
• Reliable construction – tested to ensure top-quality OEM performance and durability
• Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
• Trustworthy design – built by the industry leader in aftermarket manifolds

The Bladerunner intake manifold represents the next generation in intake manifold design. The Bladerunner intake manifold uses a unique MDV (Multiple Directional Vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast A356-T6 aluminum and uses a proprietary internal bolt design to help increase the flow and provide a solid seal void of leaks or deformities. the Bladerunner comes with up to 5 ports for nitrous injections, gauges and other accessories used by hardcore enthusiasts. In recent testing the Bladerunner intake manifold outflowed the factory intake by 32.9% and produced 17hp and 50lbs. x ft torque.

Product Features:

• Multiple Directional Van Technology For Increased Air Velocity
• Cast A356-T6 Aluminum Construction
• Uses A Proprietary Internal Bolt Design To Increase Flow
• 5 Ports For Nitrous Injections/Gauges/Other Accessories

The serrated/helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber, resulting in increased performance and improved throttle response. The serrated/helix combination design also reduces intake whistle that occurs with helix-only designs (US PAT 07055513). This Silver Bullet throttle body spacer is precision machined from 6061-T6 billet aluminum for lightweight, high strength, and perfect fit and finish. It features a black anodized finish. This Silver Bullet throttle body spacer uses all factory mounting locations, making for a hassle-free installation. A supplied gasket provides a perfect seal. An aluminum tube and coupling are included in the kit to guarantee a perfect fitment with the factory air intake system.

Product Features:

• Silver Bullet throttle body spacers create turbulence in the air flow at the point just before entry to the engine – increasing performance, as well as improving throttle response and fuel efficiency.
• Dyno-Proven Gains up to +5 HP & +7 Lbs. x Ft. TQ
• CNC-Machined from Durable 6061-T6 Billet Aluminum
• Unique Serrated/Helix Entry Design Creates Turbulence and Reduces Whistle Sound

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:

• Precision Machined From T-6061 Billet Aluminum
• Special Helix Design
• Produces Increased HP/Torque/Throttle Response
• Fits w/aFe Intakes

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:

• Precision Machined From T-6061 Billet Aluminum
• Special Helix Design
• Produces Increased HP/Torque/Throttle Response
• Fits w/aFe Intakes

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Improve The Performance
• Easy Installation

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function