2004 Chevrolet SSR Differentials

Essential 2004 Chevrolet SSR Differentials

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

Yukon Gear – 9.5 Standard Open Pinion Gear Thrust Washer (Part No.33374)

9.5 Standard Open Pinion Gear Thrust Washer

from

$28.99
9.5 Standard Open Pinion gear Thrust Washer.

Product Features:
  • Pinion gear thrust washer
  • Fits GM 9.5″
See More

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Positraction Clutch Guide

from

$8.99
Positraction clutch guide.

Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
  • Compatible with Dura Grip positractions only
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Dura Grip Positraction For GM 9.5" With 33 Spline Axles (Part No.26025)

Dura Grip Positraction For GM 9.5" With 33 Spline Axles

from

$1025.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 9.5″
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)

Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes

from

$57.99
8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
See More

Felpro – Differential Cover G (Part No.J7018977707FEL)

Differential Cover G

from

$8.28
Differential Cover G

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$373.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Composite clutches
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

Yukon Gear – Differential Carrier (Part No.57015)

Differential Carrier

from

$251.99
Differential Carrier

Powertrax – Grip LS Traction System (Part No.LS201030)

Grip LS Traction System

from

$503.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Yoke For 8.5" Or 8.6" GM (Mech 3R) With A U/Joint Size And Triple Lip Design (Part No.41071)

Yoke For 8.5" Or 8.6" GM (Mech 3R) With A U/Joint Size And Triple Lip Design

from

$226.99
Yukon yoke for 8.5″ or 8.6″ GM (mech 3R) with a U/joint size and triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside snap rings. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″ and 8.6″
  • 30 spline
  • Mechanics 3R u-joint size
  • 2.556″ snap ring span
  • 1.125″ cap diameter
  • Inside snap ring design
  • Strap style
See More

Motive Gear – Differential Pinion Seal (Part No.26064029)

Differential Pinion Seal

from

$38.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

Yukon Gear – Differential Cover B (Part No.33572)

Differential Cover B

from

$7.99
Differential Cover B

Yukon Gear – Super Carrier Shim Kit For GM 9.5" (Part No.55003)

Super Carrier Shim Kit For GM 9.5"

from

$29.99
9.5″ GM differential carrier Supershim kit.

Product Features:
  • Super carrier shim kit for GM 9.5″
  • Interlocking design makes installation much easier
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS (Part No.33342)

Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS

from

$23.99
Product Features:
  • Cross pin bolt
  • Fits GM 9.5″ and 9.25″ IFS
See More

Motive Gear – Differential Carrier Shim Kit (Part No.1101)

Differential Carrier Shim Kit

from

$8.49
High-quality Differential Carrier Shim Kit

Product Features:
  • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
See More

Yukon Gear – Pinion Depth Shims For Chrysler 8.75", 9.25", GM 9.5" & Ford 10.25" (Part No.55059)

Pinion Depth Shims For Chrysler 8.75", 9.25", GM 9.5" & Ford 10.25"

from

$21.99
8.75-42, 8.75-89, 9.25″ Chrysler & GM, 9.5″, 10.25″ pinion shim kit.

Product Features:
  • Pinion depth shim kit for Chrysler 8.75″ with ’42’ or ’89’ case housing, Chrysler 9.25″, GM 9.5″ and Ford 10.25″
See More

Motive Gear – Differential Carrier (Part No.GM8.6L)

Differential Carrier

from

$221.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

GM Genuine Parts – Side Differential Bearing (Part No.S1380)

Side Differential Bearing

from

$89.99
GM Genuine Parts Differential Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings are low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Yukon Gear – Pinion Install Kit For ’08 & Down GM 8.6" Differential (Part No.13073)

Pinion Install Kit For '08 & Down GM 8.6" Differential

from

$167.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 2008 and down GM 8.6″
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Dorman – Differential Ring And Pinion Set (Part No.697-812)

Differential Ring And Pinion Set

from

$216.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications
  • Effective fix – eliminates grinding and whining from failed original bearings
  • Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Cross Pin Shaft For GM 9.5", Fits Standard & Dura Grip Or Eaton Posi Carrier (Part No.33205)

Cross Pin Shaft For GM 9.5", Fits Standard & Dura Grip Or Eaton Posi Carrier

from

$32.99
Product Features:
  • Cross pin shaft
  • Fits GM 9.5″
  • Dura Grip positraction
See More

Pro-King – Rear Axle Shaft Kit (Part No.AXK-153)

Rear Axle Shaft Kit

from

$244.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:
  • High strength steel
  • Dual heat treating process
See More

Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

8.6" GM Standard Open Side Gear Thrust Washer

from

$4.99
8.6″ GM standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 8.6″
See More

Richmond Gear – Differential Gear Install Kit (Part No.83-1026-B)

Differential Gear Install Kit

from

$39.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Motive Gear – Differential Spool (Part No.FS10-30)

Differential Spool

from

$187.99


Product Features:
  • FULL SPOOL GM 8.5 30 SPL ST MUST USE 2-LM102911 & 2-LM102949
See More

2004 Chevrolet SSR Differentials

Maybe you’re in the middle of a full rebuild of that 2004 Chevrolet SSR. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 170 different Differentials in our inventory ranging from $2.49 to $1,153.99. That means you can find the exact parts or products you need to keep that 2004 Chevrolet SSR running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Chevrolet SSR. Valvoline, Felpro, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2004 Chevrolet SSR, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 745 reviews in this category, some of the top rated parts include Differential Ring And Pinion with 4.2 stars and Differential Carrier Gear Kit with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 2004 Chevrolet SSR rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2004 Chevrolet SSR Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Chevrolet SSR demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your SSR the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Powertrax Differentials

We carry Powertrax parts in our stock across Differential Open Unit and Components categories, plus more. For a 2004 Chevrolet SSR, our most popular Powertrax Differentials include:
Grip LS Traction System
from $503.99
(1)
Grip LS Traction System
Differential Open Unit and Components

FAQs for 2004 Chevrolet SSR Differentials

What are the most purchased Differentials for the 2004 Chevrolet SSR?

Out of 170 Differentials for the 2004 Chevrolet SSR, the most popular in our inventory are:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Housing Cover Gaskets
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
Differential Pinion Shaft Lock Bolts
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil

What are the top-rated 2004 Chevrolet SSR Differentials?

Top-rated Differentials for your 2004 Chevrolet SSR based on customer reviews/ratings are:
Differential Ring And Pinion
from $342.99
(23)
Differential Ring And Pinion
“So far so good.”
Differential Carrier Gear Kit
from $231.99
(16)
Differential Carrier Gear Kit
“First set of gears were not complete. But staff reordered them, had them next day. Thanks”
Multi Purpose Seal
from $16.99
(14)
Multi Purpose Seal
“It’s a tight fit but that’s how seals are supposed to be. I greased it up real good and lightly tapped it in using a 1 lb hammer and all was good.”