2004 Chevrolet Malibu Air Intakes

Essential Air Intakes for 2004 Chevrolet Malibus

Bosch – Electronic Throttle Body: New, Original Equipment Supplier (Part No.F00H600075)

Electronic Throttle Body: New, Original Equipment Supplier

from

$215.99
OE Throttle Body Assemblies. The throttle body is an essential part of the inlet air stream of the modern gasoline engine. In combination with the electronic throttle control system, the throttle body assembly is designed to control the amount of fresh air entering the engine. Manufactured in U.S.A. on OE production line.

Product Features:
  • Actual OE Product
  • Plug & Play – No flash update needed
  • Exact fit, form, and function
  • Manufactured worldwide on OE production lines
  • Contains an actuator, a throttle plate and a throttle position sensor (potentiometer), which are integrated into one housing
See More

GM Genuine Parts – Throttle Body: New, Original Equipment (Part No.12671379)

Throttle Body: New, Original Equipment

from

$149.99
GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Helps provide air flow for proper fuel/air mixture
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Nylon Grill Bumper Retainer

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – GM Cowl Retainer (Part No.961-362D)

GM Cowl Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 97208)

INTAKE MANIFOLD GASKET SET

from

$39.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Includes all parts needed to complete the repair
  • Includes all parts needed to complete the repair
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5819)

Ultra Seal: Intake Gasket

from

$49.49
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
  • Creates Tight Leak proof Seal
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1766)

Carburetor Tune-Up Kit

from

$38.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G2098)

Carburetor Tune-Up Kit

from

$21.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Carquest – Electrical Connector (Part No.PT978)

Electrical Connector

from

$32.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Carquest Premium – Accelerator Pedal Sensor Connector (Part No.PTA1632)

Accelerator Pedal Sensor Connector

from

$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Help – Intake Manifold Bolt (Part No.03426)

Intake Manifold Bolt

from

$14.29
Our Intake Manifold Bolt are suitable for a range of applications. Maximum gasket performance is achieved when using new manifold hardware.

Product Features:
  • Direct replacement – this engine intake manifold bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Hitachi – Electronic Throttle Body: New (Part No.ETB0016)

Electronic Throttle Body: New

from

$272.99
Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.

Product Features:
  • Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
  • Hitachi is a Tier 1 OE supplier for Throttle bodies
  • 100% NEW, never remanufactured
  • Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
  • These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
  • Powerful electric motor provides quick and accurate response for optimal engine efficiency
  • Electronics are sealed to prevent contamination that may result in inaccurate readings
  • Detailed manufacturing tracking system using QR codes
See More

Hitachi – Electronic Throttle Body: New (Part No.ETB0017)

Electronic Throttle Body: New

from

$211.99
Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.

Product Features:
  • Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
  • Hitachi is a Tier 1 OE supplier for Throttle bodies
  • 100% NEW, never remanufactured
  • Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
  • These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
  • Powerful electric motor provides quick and accurate response for optimal engine efficiency
  • Electronics are sealed to prevent contamination that may result in inaccurate readings
  • Detailed manufacturing tracking system using QR codes
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1042)

Air Charge Temperature Sensor

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Multi-Purpose Temperature Sensor (Part No.213-928)

Multi-Purpose Temperature Sensor

from

$35.99
ACDelco GM Original Equipment Multi Purpose Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Multi-Purpose O-Ring (Part No.24504709)

Multi-Purpose O-Ring

from

$4.49
GM Genuine Parts Multi Purpose O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

NTK – Throttle Position Sensor (Part No.TH0045)

Throttle Position Sensor

from

$44.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
  • The Throttle Position Sensor (TPS) reports the angle of the throttle plate to the PCM for optimal engine operation under all engine load conditions.
See More

ACDelco – Throttle Position Sensor (Part No.213-912)

Throttle Position Sensor

from

$59.99
ACDelco GM Original Equipment Throttle Position Sensors (TPS) are electrical sensors, and are GM-recommended replacements for your vehicle’s original components. They electronically inform the engine control module (ECM) of the throttle’s plate angle or position. These signals are then used to regulate the fuel and ignition system. These original equipment throttle position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Electronically informs the ECM of the throttle valve angle
  • Used to regulate the fuel and ignition system
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Delphi – Throttle Position Sensor (Part No.SS10382)

Throttle Position Sensor

from

$63.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi sensors are built to meet or exceed OE requirements and testing
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
  • Designed digital output for maximum signal to noise ratio
See More

GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.219-596)

Fuel Injection Throttle Body Seal

from

$7.79
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.12639700)

Fuel Injection Throttle Body Seal

from

$30.49
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.217-3396)

Fuel Injection Throttle Body Seal

from

$11.49
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss (Part No.434-2001)

For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss

from

$44.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
  • 1″ Long
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers

from

$47.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

ARP Auto Racing – For Use With Chevy 396/ 454 Cubic Inch, Hex Head, Polished, Ss, With Washers (Part No.435-2001)

For Use With Chevy 396/ 454 Cubic Inch, Hex Head, Polished, Ss, With Washers

from

$63.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 Psi Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61021)

Fuel Injection Throttle Body Mounting Gasket

from

$6.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

GM Genuine Parts – Fuel Injection Throttle Body Mounting Gasket (Part No.40-5083)

Fuel Injection Throttle Body Mounting Gasket

from

$22.99
GM Genuine Parts Fuel Injection Throttle Body Mounting Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help provide an air-tight seal between the throttle body and the intake manifold, and are GM-recommended replacements for your vehicle’s original components. Replace this gasket whenever you service the throttle body, as leaks can negatively affect the air/fuel ratio and compromise performance. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – GM Original Equipment Fuel Injection Throttle Body Gasket (Part No.C7001431212ACD)

GM Original Equipment Fuel Injection Throttle Body Gasket

from

$17.58
The ACDelco GM Original Equipment Fuel Injection Throttle Body Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Upgrade your 2004 Chevrolet Malibu with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 2004 Chevrolet Malibu, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Air Intakes are key to keeping your Malibu functioning at its best. At Advance Auto Parts, we offer a wide selection of 22 Air Intakes for the 2004 Chevrolet Malibu, designed to meet your needs without breaking the bank. From Throttle Bodies & Carb Part replacements to Carburetor Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2004 Chevrolet Malibu at great prices. Our Air Intakes inventory for this model ranges from just $3.99 to $324.99, with an average price of $73.49. Our 22 Air Intakes in stock come from 11 trusted brands, so you’re sure to find the right part for your 2004 Chevrolet Malibu without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Chevrolet Malibu, we stock popular OEM and aftermarket Air Intakes from top names like FELPRO, and more. FELPRO Air Intakes start at just $36.99 and boast an impressive 5 stars average rating from customers. With 61 customer reviews and counting, our 2004 Chevrolet Malibu Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Chevrolet Malibu is always ready to roll. We’re committed to providing you with everything you need to keep your Malibu in top shape, all in one place. Start shopping confidently below for your 2004 Chevrolet Malibu!

Best-Selling Throttle Bodies & Carb Parts for 2004 Chevrolet Malibus

Enhance the driving experience in your Chevrolet with 6 quality Throttle Bodies & Carb Part components, starting at $4.49.

Carquest – Electrical Connector (Part No.PT978)

Electrical Connector

from

$32.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Carquest Premium – Throttle Position Sensor (Part No.ECC1152)

Throttle Position Sensor

from

$66.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Hitachi – Throttle Chamber Assembly – New (Part No.ETB0027)

Throttle Chamber Assembly - New

from

$324.99
Smaller, lighter and more accurate than ever, Hitachi’s electronic throttle bodies are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision TPS Circuitry maintains accurate engine mapping, optimally controlling engine torque according to operating conditions and engine combustion, resulting in optimal fuel economy and horsepower with the lowest possible emissions. Details such as internal gear sizes, teeth count and materials, as well as protected circuitry provide a durable and long life product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi electronic throttle bodies are the premium choice.

Product Features:
  • These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
  • Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
  • These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
See More

GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.219-596)

Fuel Injection Throttle Body Seal

from

$7.79
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Mahle – Throttle Body Gasket (Part No.C7001289455MAH)

Throttle Body Gasket

from

$5.93
Throttle Body Gasket

GM Genuine Parts – Multi-Purpose O-Ring (Part No.24504709)

Multi-Purpose O-Ring

from

$4.49
GM Genuine Parts Multi Purpose O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Most Popular 2004 Chevrolet Malibu Carburetor Kits

Customize your Chevrolet with 1 Carburetor Kits products like Carburetor and Injector Seal Kits, all priced under $7.79.

Carquest Premium – Fuel Injector Seal Kit (Part No.AS008)

Fuel Injector Seal Kit

from

$7.79
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Top Picks for 2004 Chevrolet Malibu Intake Manifold Parts

Upgrade Chevrolet Malibus with top-quality Intake Manifold Parts parts, including 10 OEM and aftermarket selections for your 2004 model.

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 96351)

Engine Intake Manifold Gasket Set

from

$41.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Includes all parts needed to complete the repair
  • Includes all parts needed to complete the repair
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98013 T)

Engine Intake Manifold Gasket Set

from

$136.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Bolt Set (Part No.ES 72226)

Engine Intake Manifold Bolt Set

from

$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Premium quality parts
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
See More

Dorman – Help – Intake Manifold Bolt (Part No.03426)

Intake Manifold Bolt

from

$14.29
Our Intake Manifold Bolt are suitable for a range of applications. Maximum gasket performance is achieved when using new manifold hardware.

Product Features:
  • Direct replacement – this engine intake manifold bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Air Charge Temperature Sensor (Part No.31A1016)

Air Charge Temperature Sensor

from

$18.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1042)

Air Charge Temperature Sensor

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Mahle – Intake Manifold Gasket Set (Part No.A8043575202MAH)

Intake Manifold Gasket Set

from

$124.41
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
  • Every part you need to complete your gasket repair in one package unless otherwise stated
See More

Victor Reinz – Intake Manifold Gasket Set: Multi Piece Set (Part No.11-10299-01)

Intake Manifold Gasket Set: Multi Piece Set

from

$28.99
Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • For those who demand the maximum durability and reassurance of steel carrier gasket designs, Victor Reinz offers a broad range of MaxDry STL gaskets.
  • It is critical that the molded rubber sealing areas resist all the possible fuels, coolants and oil formulations used in these vehicles. Victor Reinz engineers have utilized only premium grade FKM synthetic rubber for this purpose.
  • Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.
See More

ACDelco – GM Original Equipment Intake Manifold Gasket (Part No.A8040354136ACD)

GM Original Equipment Intake Manifold Gasket

from

$7.12
ACDelco offers a full line of quality GM OE intake manifold gaskets that meet Original Equipment standards. When you’re in need of intake gaskets and gasket sets, look to ACDelco for quality, value and guaranteed performance. Validated by GM Engineering which assures proper form, fit and function. This is important on high labor-hour manifold repairs.

Product Features:
  • Both upper and lower intake manifolds with matching gaskets sets available.
  • Only ACDelco and GM offer complete later model GM coverage.
  • Design enhanced to incorporate updates, upgrades and Technical Service Bulletins (TSBs.)
See More

ACDelco – Intake Manifold Gask (Part No.A8040580021ACD)

Intake Manifold Gask

from

$6.56
Intake Manifold Gask

In-Demand Throttle Body Parts for 2004 Chevrolet Malibus

Select from 3 premium Throttle Body Parts parts for your 2004 Chevrolet Malibu, with prices ranging from $253.99 to $282.05.

Tech Smart – Fuel Injection Throttle Body (Part No.S20098)

Fuel Injection Throttle Body

from

$282.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:
  • 100% NEW, never remanufactured, which maximizes performance and extends service life
  • Undergoes extensive testing to ensure quality and reliability out of the box
  • Matches OE response time for peak performance on drive by wire systems
  • All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
See More

GM Genuine Parts – Fuel Injection Throttle Body with Throttle Actuator (Part No.12568796)

Fuel Injection Throttle Body with Throttle Actuator

from

$268.99
GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Helps provide air flow for proper fuel/air mixture
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Cardone – Electric Throttle Body: Remanufactured (Part No.67-3012)

Electric Throttle Body: Remanufactured

from

$253.99
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Product Features:
  • Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
  • A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
  • The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
  • Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
  • Each unit is guaranteed to function like the original.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Most Sold 2004 Chevrolet Malibu Airboxes

Explore our best-selling Chevrolet parts for the 2004 Malibu among 2 OEM and aftermarket options starting from $3.99.

Dorman – GM Bumper Retainer (Part No.961-364D)

GM Bumper Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Nylon Grill Bumper Retainer

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Top-Rated Air Intakes Brands For Your 2004 Chevrolet Malibu

Shop for the best-rated brands offering Air Intakes and other products for your 2004 Chevrolet Malibus. Below you’ll find some of our best rated Air Intakes from FELPRO, and more. Air Intakes from these brands that fit a 2004 Malibu start at just $36.99 and are rated as high as 5 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2004 Chevrolet Malibu Air Intakes

When it comes to maintaining or upgrading your 2004 Chevrolet Malibu, using quality Air Intakes is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Air Intakes, specifically designed for the 2004 Chevrolet Malibu. With over 3 FELPRO brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.99, with an average price of just $71.99. Plus, with over 16 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Engine Intake Manifold Bolt Set
from
$36.99

(10)

Engine Intake Manifold Bolt Set

“Exact replacement. Just take your time and recheck the torque cause the thread sealer on the threads can give you a false reading the first time you s”

Engine Intake Manifold Gasket Set
from
$136.99

(1)

Engine Intake Manifold Gasket Set

“Great product, included all the gaskets for job and reassembly”

Engine Intake Manifold Gasket Set
from
$41.99

(5)

Engine Intake Manifold Gasket Set

“Install under intake”

FAQs for 2004 Chevrolet Malibu Air Intakes

Which Air Intakes are best-sellers for 2004 Chevrolet Malibus?

Out of 22 Air Intakes that fit 2004 Chevrolet Malibus, the following parts are the top sellers:

What’s the price range for 2004 Chevrolet Malibu Air Intakes?

Air Intake prices for the 2004 Chevrolet Malibu start at $3.99 and go up to $324.99 for the most premium parts.

What’s the average price of a Air Intake for a 2004 Chevrolet Malibu?

The average price for Air Intakes for the 2004 Chevrolet Malibu is $73.49. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other Chevrolet Malibu model years?

Yes, we currently carry Air Intakes for 43 model years of Chevrolet Malibus between 1964 and 2025. Air Intakes are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Air Intakes for my 2004 Chevrolet Malibu?

The cheapest 2004 Chevrolet Malibu Air Intakes we carry in stock are:

What are the top-rated Air Intakes that fit the 2004 Chevrolet Malibu?

Out of 61 reviews by customers, our 2004 Chevrolet Malibu Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2004 Chevrolet Malibu and their top-rated products:

Can I get help with 2004 Chevrolet Malibu Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Air Intakes and more.

What is your return policy for Chevrolet Malibu Air Intakes?

Advance Auto Parts keeps returns simple. For new Chevrolet Malibu Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.