2004 Chevrolet Corvette Exhaust System Kits

Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:

• Direct replacement for a proper fit every time
• Durable steel construction
• Repair kit helps to secure exhaust manifold to the vehicle engine head
• Manufactured to strict engineering quality standards

The MagnaFlow 1980-1981 Chevrolet Corvette Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.7L 1980-1981 Chevrolet Corvette with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 2.625in. Polished Welded-On Single Wall Turndown Cut Edge tips, this Chevrolet Corvette exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Corvette’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16889 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16889 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

The MagnaFlow 2009-2013 Chevrolet Corvette Race Series Axle-Back Performance Exhaust System 15283 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 6.2L 2009-2013 Chevrolet Corvette take on any pretenders, whether on the track or the street. Exhaust kit 15283 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Chevrolet Corvette exhaust kit features fast-flowing mandrel bent 2.5in. diameter main piping that ends in a Quad Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 15283’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 15283 is backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• High performance lightweight design
• Straight pipe-like sound
• Durable corrosion-resistant stainless steel construction

Super Competition Sidemount Headers deliver the most aggressive style and performance for your early Corvette, Camaro, Nova or Firebird. Sidemount Headers are built from lightweight 18 gauge tubing. Sidetubes slip directly to the collector for a leak free seal. Hooker sidemount Headers and sidetubes come with 3 choices of coating; show quality chrome, high heat resistant black paint and Hooker’s metallic ceramic thermal barrier coating. Replaceable Hooker Mufflers are available separately in 2 different styles; glasspack and reverse flow. The glass pack style provides the highest performance with minimal backpressure and sound control. The reverse flow is designed for maximum sound control.

Product Features:

• Completely Welded On All Sides
• Clamp Tube For Leak Free Seal
• Clamp Tube For Leak Free Seal

The MagnaFlow 1992-1996 Chevrolet Corvette Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.7L 1992-1996 Chevrolet Corvette with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 3 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Chevrolet Corvette exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Corvette’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16837 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16837 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 2005-2008 Chevrolet Corvette Street Series Axle-Back Performance Exhaust System 15886 brings enhanced engine sound and dyno-proven performance to your 6.0L, 6.2L 2005-2008 Chevrolet Corvette with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Chevrolet Corvette exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Chevrolet Corvette’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15886 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

BORLA(R) Cat-back(TM) and Rear Section exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy And The Distinctive BORLA(R) Sound Of Power respected by motoring enthusiasts everywhere.

Product Features:

• Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy And The Distinctive BORLA(R) Sound Of Power
• Built From Premium T-304 Stainless Steel, Superior To T-400 Series Knockoffs To Give The Absolute Best In Performance And Durability
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer Controlled CNC Manufacturing Ensures An Accurate Fit
• S-Type II Systems Are Calibrated On A Vehicle-By-Vehicle Basis To Deliver The Mostádesirableásound

The MagnaFlow 1997-2004 Chevrolet Corvette Street Series Axle-Back Performance Exhaust System 16732 brings enhanced engine sound and dyno-proven performance to your 5.7L 1997-2004 Chevrolet Corvette with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Chevrolet Corvette exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Chevrolet Corvette’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16732 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

Cat-Backs(TM) and Rear Sections are available with either the highly popular S-Type muffler or the Touring muffler. The S-Type is a smaller, round muffler with a center-in or center-out configuration giving a more aggressive sound and higher flow. For those who prefer it on the milder side, we have the Touring muffler a larger case producing less aggressive sound. Some come with an assortment of tip designs.

Product Features:

• BORLA(R) Cat-Back(TM) Exhausts Feature, Straight Through And Multi-Core Technology To Unleash Hidden Horsepower
• Each System Is Built From Aircraft Grade High Quality T-304 Stainless Steel
• Ultra Smooth Mandrel Bends Ensure Maximum Flow And Power
• Precision Computer Controlled CNC Manufacturing Ensures An Accurate Fit
• The S-Type Is A Smaller, Round Muffler With A Center-In Or Center-Out Configuration Giving A More Aggressive Sound And Higher Flow
• Free-Flow Exhaust Utilizes Patented Award And Race Winning Technology To Deliver Quality, Sound, Performance Gains And Enhanced Fuel Economy
• Easy Bolt-On Installation

Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.

Product Features:

• Reducer Flex-Tubes
• Reduces Backpressure
• Hardware Included
• Instructions Included

The MagnaFlow 1968-1973 Chevrolet Corvette Street Series Crossmember-Back Performance Exhaust System 16842 brings enhanced engine sound and dyno-proven performance to your 5.3L, 5.7L 1968-1973 Chevrolet Corvette with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Chevrolet Corvette exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Chevrolet Corvette’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 2.5in. Satin Welded-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16842 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The power of BORLA(R) Multicore technology, with the sound of vehicle-specific acoustic tuning. ATA(R)K technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK(R) equipped exhaust systems deliver the highest available Decibel levels in the BORLA(R) street -legal lineup. ATAK(R) is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. ATAK(R) technology is based on specifically tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound.

Product Features:

• Delivers The Highest Available DB (Decibel) Levels In The Street-Legal Line Up
• Tuned Like A Graphic Equalizer To Shape And Focus Sound Waves For Optimum High-Volume Output
• Based On Specifically-Tuned Attributes Of The Internal Muffler Cores, Calibrated On A Vehicle-By-Vehicle Basis To Deliver The Most Desirable Sound
• By Combining Varying Degrees Of Solid Walls, Perforation Patterns, Diameters And Other Characteristics Of The Internal Cores, Borla(R) Engineers Fine-Tune ATAK(R) Sound Differently For Each Vehicle
• Sound Waves Are Attenuated And Tuned While Passing And Deflecting Through Multiple Core Walls
• ATAK(R) Technology Is Based On Specifically-Tuned Attributes Of The Internal Muffler Cores, Which Are Calibrated On A Vehicle-By-Vehicle Basis To Deliver The Mostádesirableásound

This incredibly popular 2-tip Cat-Back(TM) (dubbed the Stinger on the Internet) features S-Type mufflers, smaller round mufflers with a center-in or center-out configuration giving a more aggressive sound and higher flow.

Product Features:

• BORLA(R) Cat-Back(TM) Exhausts Feature, Straight Through And Multi-Core Technology To Unleash Hidden Horsepower
• Each System Is Built From Aircraft Grade High Quality T-304 Stainless Steel
• Ultra Smooth Mandrel Bends Ensure Maximum Flow And Power
• Precision Computer Controlled CNC Manufacturing Ensures An Accurate Fit
• The S-Type Is A Smaller, Round Muffler With A Center-In Or Center-Out Configuration Giving A More Aggressive Sound And Higher Flow
• Free-Flow Exhaust Utilizes Patented Award And Race Winning Technology To Deliver Quality, Sound, Performance Gains And Enhanced Fuel Economy

Super Competition Sidemount Headers deliver the most aggressive style and performance for your early Corvette, Camaro, Nova or Firebird. Sidemount Headers are built from lightweight 18 gauge tubing. Sidetubes slip directly to the collector for a leak free seal. Hooker sidemount Headers and sidetubes come with 3 choices of coating; show quality chrome, high heat resistant black paint and Hooker’s metallic ceramic thermal barrier coating. Replaceable Hooker Mufflers are available separately in 2 different styles; glasspack and reverse flow. The glass pack style provides the highest performance with minimal backpressure and sound control. The reverse flow is designed for maximum sound control.

Product Features:

• Completely Welded On All Sides
• Clamp Tube For Leak Free Seal
• Clamp Tube For Leak Free Seal